RM/92000/M Compact Cylinders Magnetic Piston Double Acting ∅ 12 to 100 mm ● Very compact – approximately one third the basic length of a corresponding ISO model ● Entirely manufactured from non-corrodible materials ● Magnetic piston as standard provides a wide range of control options Technical Data Medium: Compressed air, filtered, lubricated or non-lubricated Operation: Double acting, non-cushioned and magnetic piston Operating Pressure: 1 to 10 bar Operating Temperature: -5°C* to +80°C *Consult our Technical Service for use below +2°C Cylinder Diameters: 12, 16, 20, 25, 32, 40, 50, 63, 80, 100 mm Standard Strokes (short stroke version): 5, 10 mm ∅ 12 to 63 mm 15, 20, 25, 30 mm ∅ 12 to 100 mm 40, 50 mm ∅ 20 to 100 mm Standard Strokes (long stroke version): 60, 80 mm ∅ 32 to 100 mm 100 mm ∅ 50 to 100 mm Non-standard Strokes: Non-standard strokes available 200 mm max. ∅ 16 to 25 mm 250 mm max. ∅ 32 and 40 mm 300 mm max. ∅ 50 to 100 mm Materials: Anodised aluminium alloy barrel and end caps, stainless steel (∅ 12 to 40 mm Austenitic, ∅ 50 to 100 mm Martensitic) piston rod, polyurethane and / or nitrile rubber seals Ordering Information To order a basic 80 mm bore cylinder with a 50 mm stroke quote: RM/92080/M/50 To order a basic 100 mm bore cylinder with a 100 mm stroke quote: RM/92100/M/100 To order mounting brackets refer to appropriate cylinder mounting table. Order magnetically operated switches separately. Accessories Switches M/40, TM/40 Switches M/41, M/42 See page N 4.3.041.01 N 4.3.044.01 Magnetic piston Alternative Cylinders: See page N 1.5.141.02 9/96 Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. N 1.5.141.01 RM/92000/M Alternative Cylinders Symbol Model (magnetic piston) TRM/92000/M Description Heat resistant seals, 150°C max. (∅ 32 to 100 mm) RM/92000/MU Extended piston rod (max. extended piston rod up to 100 mm) RM/92000/JM Double ended piston rod (∅ 16 to 100 mm) RM/92000/N2 Non-rotating piston rod (∅ 16 to 100 mm) RM/92000/N4 Guided piston rod (∅ 16 to 100 mm) Non-standard strokes available: 5 mm min. ∅ 16 to 40 mm 10 mm min. ∅ 50 to 100 mm Stroke length max., see page N 1.5.141.01 Non-standard strokes available: 50 mm max. ∅ 16 mm 80 mm max. ∅ 20 and 25 mm 100 mm max. ∅ 32 to 100 mm For combinations of alternative cylinders consult our Technical Service. Theoretical Forces ● Air Consumption ● Torque for Cylinders RM/92000/N2 RM/92000/M Theoretical forces (N) at 6 bar Outstroke Instroke 68 51 121 90 188 141 295 227 483 362 754 633 1178 990 1870 1682 3016 2721 4712 4418 ∅ 12 16 20 25 32 40 50 63 80 100 RM/92000/M Air consumption (l/cm stroke) Outstroke Instroke 0,008 0,007 0,014 0,011 0,022 0,017 0,035 0,027 0,056 0,042 0,088 0,074 0,138 0,116 0,218 0,196 0,352 0,318 0,550 0,515 RM/92000/N2 at 6 bar Model RM/92016/N2 RM/92020/N2 RM/92025/N2 RM/92032/N2 RM/92040/N2 RM/92050/N2 RM/92063/N2 RM/92080/N2 RM/92100/N2 Torque max. (Nm) 0,15 0,25 0,40 0,75 0,75 1,50 1,50 2,50 2,50 Weights of Cylinders and Mountings (kg) ∅ 12 16 20 25 32 40 50 63 80 100 RM/92000/M Weight at 0 mm 0,060 0,080 0,100 0,150 0,250 0,380 0,450 0,820 1,200 1,830 Weight per 25 mm 0,040 0,040 0,060 0,070 0,120 0,150 0,180 0,260 0,330 0,420 RM/92000/N4 Weight at 0 mm 0,110 0,130 0,170 0,280 0,440 0,500 0,900 1,350 2,200 Weight per 25 mm 0,050 0,070 0,100 0,130 0,150 0,200 0,300 0,350 0,600 Style ‘B’, ‘G’ 0,020 0,020 0,020 0,040 0,060 0,150 0,170 0,330 0,410 0,720 Style ‘C’ 0,020 0,020 0,020 0,040 0,040 0,100 0,110 0,130 0,180 0,480 Style ‘F’ 0,010 0,010 0,010 0,010 0,020 0,020 0,040 0,090 0,220 0,220 Nut 0,001 0,001 0,001 0,002 0,003 0,003 - Stud or Adaptor 0,001 0,002 0,003 0,005 0,010 0,010 0,020 0,035 0,075 0,075 Assembly kit 0,020 0,022 0,026 0,035 0,045 0,120 0,125 0,270 0,290 0,535 Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under ‘Technical Data’. Before using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult NORGREN. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. N 1.5.141.02 The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. 9/96 RM/92000/M Guided Piston Rod RM/92000/N4 Permissible Load and Torque F M F M-Torque (Nm) F-Side load (N) 30 0,7 25 0,6 0,5 20 ø 25 0,4 15 ø 20 0,3 10 ø 25 5 ø 20 0,2 ø 16 0,1 ø 16 0 0 0 10 30 50 0 10 100 90 stroke (mm) 70 30 50 70 90 100 stroke (mm) M-Torque (Nm) F-Side load (N) 100 7 90 6 80 ø 100 ø 100 70 5 60 4 ø 80 50 3 40 ø 80 ø 63 30 ø 50 2 ø 40 1 ø 63 20 10 ø 32 0 0 0 10 9/96 ø 50 ø 40 ø 32 30 50 70 100 90 stroke (mm) 0 10 30 Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. 50 70 90 100 stroke (mm) N 1.5.141.03 RM/92000/M Basic Dimensions RM/92000/M Double ended piston rod (∅ 12 to 100 mm) (∅ 16 to 100 mm) PL EE ZJ 2 + stroke FF ** EE RT PL ZM + 2 x stroke TG2 ZJ + stroke WH RM/92000/JM E TG1 ø JB ø FB ø MM h9 PF MX øD X ZH 2 + stroke GB Z BG ZH + stroke Section X Section Z 13 KF 2,7 ** Only the 4 front holes are tapped on stroke lengths of less than: ∅ 25 and 32 mm: 5 mm, ∅ 40 and 63 mm: 15 mm (.../N2: 5 mm), ∅ 50 and 80 mm: 10 mm, ∅ 100 mm: 25 mm (.../N2: 15 mm). Note: ∅ 12 to 20 mm feature only two side dovetails. 45 ° AF Non-rotating piston rod RM/92000/N2 ZJ 1 + stroke (∅ 16 to 100 mm) MX 1 ZH 1 + stroke Model 92012 ∅ 12 AF 6 BG 9 ∅D 32,5 ❑E 25 EE M5 ∅ FB 3,3 FF 10 GB 3,5 ∅ JB 6 KF M3 ∅ MM h9 6 MX (AF) 5 MX 1 (AF) PF 15 PL 7 RT M4 TG 1 17 TG 2 13 WH 4,5 ZH 24 (34) ZH 1 ZH 2 ZJ 28,5 (38,5) ZJ 1 ZJ 2 ZM ( ) = for stroke > 50 mm N 1.5.141.04 92016 16 7 9 36,5 28 M5 3,3 10 3,5 6 M4 8 6 6 17 7,5 M4 20 20 5,5 24,5 (34,5) 34,5 29,5 30 (40) 40 35 41 92020 20 8 9 41,5 32 M5 3,3 10 3,5 6 M5 10 8 8 19,5 7,5 M4 23 23 6 26 (36) 36 31,5 32 (42) 42 37,5 44 92025 25 9 12 48 37 M5 4,2 10 4,5 7,5 M6 12 10 10 22 8 M5 27 27 6,5 28,5 (38,5) 38,5 34,5 35 (45) 45 41 48 92032 32 12 12 58 45 G 1/8 4,2 18 4,5 7,5 M8 16 13 13 27,5 9 M5 33 33 6,5 29 (39) 39 36,5 35,5 (45,5) 45,5 43 50 92040 40 12 16 71,5 55 G 1/8 6,8 18 6,5 10,5 M8 16 13 13 31,5 10 M8 41 41 6,5 31,5 (41,5) 41,5 39,5 38 (48) 48 46 53 92050 50 14 16 81 63 G 1/8 6,8 18 6,5 10,5 M 10 20 17 16 37 10,5 M8 48 48 8 35 (45) 45 42 43 (53) 53 50 59 Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. 92063 63 16 20 104 80 G 1/4 8,5 22 8,5 13,5 M 12 20 17 16 48 13 M 10 61 61 8 42,5 (52,5) 52,5 52 50,5 (60,5) 60,5 60 69 92080 80 22 20 120 94 G 1/4 8,5 22 8,5 13,5 M 16 25 22 21 57 14,5 M 10 73 73 9 47 (57) 57 56 56 (66) 66 65 74 92100 100 22 25 148,5 116,5 G 1/4 10,2 22 10,5 16,5 M 16 25 22 21 67 16 M 12 90,5 90,5 10 48,5 (58,5) 58,5 58 58,5 (68,5) 68,5 68 78 9/96 RM/92000/M RM/92000/N4 Guided Piston Rod ZJ + stroke EE GB PL PL JB BG FB Section Z H E PF TT C WH RT FF 13 2,7 øD Z ZH + stroke Model 92016 ∅ 16 BG 9 C 21 ∅D 36,5 ❑E 28 EE M5 ∅ FB 3,3 FF 10 GB 3,5 ❏H 26,5 HF 6 ∅ JB 6 PF 17 PL 7,5 RT M4 ❏ TG 20 TT M3 WH 11,5 ZH 24,5 ZJ 36 ( ) = for stroke > 50 mm 92020 20 9 25 41,5 32 M5 3,3 10 3,5 30 8 6 19,5 7,5 M4 23 M3 14 26 (36) 40 (50) 45 TG HF 92025 25 12 29,5 48 37 M5 4,2 10 4,5 35 8 7,5 22 8 M5 27 M4 14,5 28,5 (38,5) 43 (53) 92032 32 12 38 58 45 G 1/8 4,2 18 4,5 43 10 7,5 27,5 9 M5 33 M4 16,5 29 (39) 45,5 (55,5) ° Note: ∅ 16 to 20 mm feature only two side dovetails. 92040 40 16 46,5 71,5 55 G 1/8 6,8 18 6,5 52 10 10,5 31,5 10 M8 41 M5 16,5 31,5 (41,5) 48 (58) 92050 50 16 56,5 81 63 G 1/8 6,8 18 6,5 60 12 10,5 37 10,5 M8 48 M6 20 35 (45) 55 (65) 92063 63 20 71 104 80 G 1/4 8,5 22 8,5 76 12 13,5 48 13 M 10 61 M8 20 42,5 (52,5) 62,5 (72,5) 92080 80 20 89 120 94 G 1/4 8,5 22 8,5 90 16 13,5 57 14,5 M 10 73 M 10 25 47 (57) 72 (82) 92100 100 25 110 148,5 116,5 G 1/4 10,2 22 10,5 113 20 16,5 67 16 M 12 90,5 M 12 30 48,5 (58,5) 78,5 (88,5) Piston Rod Clevis Mounting Style ‘F’ RK CE CL B KW CM B12 CL KK KF LE ER KV Model ‘F’ QM/57008/25 QM/8010/25 QM/92020/25 QM/57016/25 QM/57020/25 QM/57025/25 Stud M/P1710/18 M/P1710/19 M/P1710/20 M/P1710/21 M/P1710/22 Nut M/P1500/111 M/P1501/80 M/P1501/109 M/P1501/79 M/P1501/60 Adaptor M/P71470/1 ∅ 12 16 20 25 32 and 40 50 A 12 16 20 25 25 29 B 12 CE 11 16 20 20 24 26 ∅ CK h11 3 h9 4 5 5 6 8 ❑ CL 6 8 10 10 12 14 CM B12 3 4 5 5 6 7 ER 4,5 6,5 8 8 9,5 11,5 KF M3 M4 M5 M6 M8 M 10 KK M3 M4 M5 M6 M8 M 10 x 1,25 KV (A/F) 6 7 8 10 13 12 KW 2 2 2,5 3 4 5 LE 5 8 10 10 12 12 RK 10 11,5 14,5 14,5 17,5 20,5 To order a piston rod clevis mounting style ‘F’ complete: ∅ 12 to 40 mm= Model ‘F’ plus Stud and Nut, ∅ 50 to 100 mm= Model ‘F’ plus Adaptor. 9/96 ø CK h11 A Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. QM/57040/25 M/P71470/2 63 35 15 40 10 20 10 16 M 12 M 12 x 1,25 13 5 20 29 QM/57063/25 M/P71470/3 80 and 100 45 20 56 14 27 14 21 M 16 M 16 x 1,5 17 5 28 36,5 N 1.5.141.05 RM/92000/M Rear Flange Mounting Style ‘B’ Front Flange Mounting Style ‘G’ Foot Mounting Style ‘C’ E R MF AH DG AT TF UF XA + stroke H AO SA + stroke FB W ø AB ø DB ZF + stroke TR UL Model ‘B’, ‘G’ QM/90012/22 QM/90016/22 QM/90020/22 QM/90025/22 QM/90032/22 Model ‘C’ QM/90012/21 QM/90016/21 QM/90020/21 QM/90025/21 QM/90032/21 ∅ 12 16 20 25 32 ∅ AB 3,4 3,4 3,4 4,3 4,3 AH 13,5 15 16,5 20 23 AO 4 4 4 5 5 AT 9,5 9,5 9,5 12,5 12,5 ∅ DB 6 6 6 7,5 7,5 DG 3,5 3,5 3,5 4,5 4,5 E 26 30 33 38 46 H 2 2 2 3 3 ∅ FB 3,5 3,5 3,5 4,5 4,5 MF 5 5 5 6,5 6,5 R 18 22 25 28 36 TF 38 42 48 54 66 TR 25 32 35 41 19 UF 46 50 56 64 76 UL 33 40 43 51 46 W - 0,5 0,5 1 0 0 ZF 33,5 35 (45) 37 (47) 41,5 (51,5) 42 (52) SA 32 32,5 (42,5) 34 (44) 38 (48) 38,5 (48,5) XA 32,5 34 (44) 36 (46) 39,5 (49,5) 40 (50) Note: Dimension ‘W’ negative figures indicate that the piston rod is proud of the mounting face. ( ) = for stroke > 50 mm and non-rotating piston rod cylinders RM/92000/N2 QM/90040/22 QM/90040/21 40 6,4 28,5 6,5 16 10,5 6,5 57 4,5 6,5 9,5 43 78 21 92 56 -3 47,5 (57,5) 44,5 (54,5) 44,5 (54,5) QM/90050/22 QM/90050/21 50 6,4 32 6,5 16 10,5 6,5 64 4,5 6,5 9,5 50 90 27 104 64 -1 52,5 (62,5) 47,5 (57,5) 49 (59) QM/90063/22 QM/90063/21 63 8,4 41,5 8 22 13,5 8,5 81 5,5 8,5 12,5 63 110 34 128 81 - 4,5 63,5 (73,5) 58,5 (68,5) 58,5 (68,5) QM/90080/22 QM/90080/21 80 8,4 49 8 25,5 13,5 8,5 95 5,5 8,5 12,5 77 128 44 146 95 - 3,5 68,5 (78,5) 62,5 (72,5) 64 (74) QM/90100/22 QM/90100/21 100 10,5 59,5 9,5 28,5 16,5 10,5 118 6,5 11 12,5 98 156 56 176 118 - 2,5 71,5 (81,5) 67,5 (77,5) 68 (78) QM/92080/55 80 20 17 QM/92100/55 100 25 19 Assembly kit A Section A -B L SW (A/F) B Assembly kit ∅ L SW (A/F) QM/92012/55 12 10 7 N 1.5.141.06 QM/92016/55 16 10 7 QM/92020/55 20 10 7 QM/92025/55 25 10 8 QM/92032/55 32 10 8 QM/92040/55 40 15 13 QM/92050/55 50 15 13 Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. QM/92063/55 63 20 17 9/96 RM/92000/M Spares 2 Model Spares kit RM/92050/M RM/92063/M RM/92080/M RM/92100/M QM/92050/00 QM/92063/0 QM/92080/00 QM/92100/00 9 11 Comprising Item 2 9 11 Description Piston rod seal Piston seal Wear ring Grease Quantity 1 1 1 1 Note: Please quote the cylinder number when ordering spare parts. Spares are not available for ∅ 12 to 40 mm models. 9/96 Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. N 1.5.141.07