Solid State Sensors Digital Position Sensors FEATURES 1 3.8-30 VDC supply voltage 1 Digital current sinking output 1 3 pin in-line PCB terminals 1 Quad-Hall design virtually eliminates mechanical stress effects 1 Temperature compensated magnetics 1 Operate/release points can be customized 1 Bipolar, unipolar, latching magnetics 1 High output current capability –50 mA absolute maximum 1 Operate/release points symmetrical around zero gauss (bipolar/latch) 1 Operating temperature range of –40 to +150°C (–40 to +302°F) 1 Package material: Plaskon 3300H 1 Surface mount version available: SS400-S (with cut and formed leads) SS400 Series SS400 Series position sensors have a thermally balanced integrated circuit over full temperature range. The negative compensation slope is optimized to match the negative temperature coefficient of lower cost magnets. Bipolar, latching and unipolar magnetics are available. NOTICE Interruption of power to a latching device may cause the output to change state when power is restored. If a magnetic field of sufficient strength is present, the sensor output will be in the condition dictated by the magnetic field. Band gap regulation provides extremely stable operation over 3.8 to 30 VDC supply voltage range. SS400 sensors are capable of continuous 20 mA sinking output, and may be cycled as high as 50 mA maximum. ORDER GUIDE Catalog Listing SS411A SS413A SS441A SS443A SS449A SS461A SS466A Magnetic Type Supply Voltage (VDC) Supply Current (max.) Bipolar 3.8 to 30 10 mA Bipolar 3.8 to 30 10 mA Unipolar 3.8 to 30 10 mA Unipolar 3.8 to 30 10 mA Unipolar 3.8 to 30 10 mA Latching 3.8 to 30 10 mA Latching 3.8 to 30 10 mA Output Type Output Voltage (max.) Output Current, max.* Output Leakage Current, max. Sink .40 V 20 mA 10 µA Sink .40 V 20 mA 10 µA Sink .40 V 20 mA 10 µA Sink .40 V 20 mA 10 µA Sink .40 V 20 mA 10 µA Sink .40 V 20 mA 10 µA Sink .40 V 20 mA 10 µA .05 µs typ. 1.5 µs max. .15 µs typ. 1.5 µs max. G mT 70 7.0 –70 –7.0 15 1.5 65 6.5 –65 –6.5 15 1.5 60 6.0 –60 –6.0 15 1.5 60 6.0 –60 –6.0 12 1.2 65 6.5 –65 –6.5 12 1.2 70 7.0 –70 –7.0 10 1.0 .05 µs typ. 1.5 µs max. .15 µs typ. 1.5 µs max. G mT 140 14.0 –140 –14.0 20 2.0 140 14.0 –140 –14.0 20 2.0 140 14.0 –140 –14.0 20 2.0 140 14.0 –140 –14.0 20 2.0 140 14.0 –140 –14.0 20 2.0 140 14.0 –140 –14.0 20 2.0 .05 µs typ. 1.5 µs max. .15 µs typ. 1.5 µs max. G mT 135 13.5 20 2.0 15 1.5 117 11.7 20 2.0 18 1.8 115 11.5 20 2.0 20 2.0 120 12.0 15 1.5 15 1.5 123 12.3 15 1.5 8 0.8 125 12.5 10 1.0 5 0.5 .05 µs typ. 1.5 µs max. .15 µs typ. 1.5 µs max. G mT 215 21.5 80 8.0 25 2.5 190 19.0 80 8.0 25 2.5 180 18.0 75 7.5 25 2.5 180 18.0 70 7.0 15 1.5 190 19.0 60 6.0 10 1.0 200 20.0 55 5.5 5 0.5 .05 µs typ. 1.5 µs max. .15 µs typ. 1.5 µs max. G mT 435 43.5 210 21.0 30 3.0 400 40.0 230 23.0 30 3.0 390 39.0 235 23.5 30 3.0 400 40.0 215 21.5 30 3.0 410 41.0 200 20.0 30 3.0 420 42.0 185 18.5 30 3.0 .05 µs typ. 1.5 µs max. .15 µs typ. 1.5 µs max. G mT 110 11.0 – 110 – 11.0 50 5.0 90 9.0 – 90 – 9.0 50 5.0 85 8.5 – 85 – 8.5 50 5.0 85 8.5 – 85 – 8.5 50 5.0 100 10.0 – 100 – 10.0 50 5.0 110 11.0 – 110 – 11.0 50 5.0 .05 µs typ. 1.5 µs max. .15 µs typ. 1.5 µs max. G mT 200 20.0 – 200 – 20.0 200 20.0 185 18.5 – 185 – 18.5 200 20.0 180 18.0 – 180 – 18.0 200 20.0 180 18.0 – 180 – 18.0 190 19.0 180 18.0 – 180 – 18.0 160 16.0 185 18.5 – 185 – 18.5 140 14.0 Output Switching Time Rise (10-90%) VCC=12 V, RL=1.6 K, C=20 pF Fall (90-10%) Magnetic Characteristics –40°C Max. Op. Min. Rel. Min. Dif. 0°C Max. Op. Min. Rel. Min. Dif. 25°C Max. Op. Min. Rel. Min. Dif. 85°C Max. Op. Min. Rel. Min. Dif. 125°C Max. Op. Min. Rel. Min. Dif. 150°C Max. Op. Min. Rel. Min. Dif. * Absolute maximum output current is 50 mA for all SS400 listings. G = Gauss. mT = milliTesla. Note: For SS400 on tape with straight or formed leads on 0.100N centers, contact the 800 number. One box contains 5,000 sensors. PDFINFO 8 p a g e - 0 0 8 Honeywell 1 MICRO SWITCH Sensing and Control 1 1-800-537-6945 USA 1 F1-815-235-6847 International 1 1-800-737-3360 Canada Solid State Sensors Digital Position Sensors OPERATE AND RELEASE POINTS SS411A SS400 Series SS443A SS466A PDFINFO SS449A SS441A SS461A Digital SS413A MOUNTING DIMENSIONS (For reference only) Tape styles T2 and T3 are supplied in Ammopack (Fanfold) format, in cardboard boxes. Each box contains 5000 sensors. STANDARD LEAD VERSION TAPE STYLE T2 SURFACE MOUNT (-S) VERSION TAPE STYLE T3 REDUCED LEAD LENGTH (-R) VERSION TAPE STYLE SP & RP DIRECTION OF FEED FROM REEL Honeywell 1 MICRO SWITCH Sensing and Control 1 1-800-537-6945 USA 1 F1-815-235-6847 International 1 1-800-737-3360 Canada 9 p a g e - 0 0 9