2 3 2 2 3 1 1 4 1 3 27 2 T- 4 SO 4 Anti-Parallel Parallel APT2X30D120J APT2X31D120J APT2X30D120J APT2X31D120J 1200V 1200V 30A 30A DUAL DIE ISOTOP® PACKAGE ULTRAFAST SOFT RECOVERY DUAL RECTIFIER DIODES PRODUCT FEATURES PRODUCT BENEFITS • Anti-Parallel Diode • Ultrafast Recovery Times • Low Losses • Soft Recovery Characteristics • Low Noise Switching • Cooler Operation • Low Forward Voltage • Higher Reliability Systems A • • • • • Popular SOT-227 Package • High Blocking Voltage • Low Leakage Current Characteristic / Test Conditions Maximum D.C. Reverse Voltage APT2X30/2X31D120J UNIT 1200 Volts EL VR Density All Ratings: TC = 25°C unless otherwise specified. IM MAXIMUM RATINGS Symbol • Increased System Power IN • -Switchmode Power Supply -Inverters Free Wheeling Diode -Motor Controllers -Converters Snubber Diode Uninterruptible Power Supply (UPS) Induction Heating High Speed Rectifiers RY PRODUCT APPLICATIONS Maximum Peak Repetitive Reverse Voltage VRWM Maximum Working Peak Reverse Voltage IF(AV) Maximum Average Forward Current (TC = 80°C, Duty Cycle = 0.5) 30 RMS Forward Current 70 IF(RMS) IFSM TJ,TSTG TL PR VRRM Amps 210 Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3ms) -55 to 150 Operating and StorageTemperature Range °C 300 Lead Temperature: 0.063" from Case for 10 Sec. STATIC ELECTRICAL CHARACTERISTICS Characteristic / Test Conditions MIN TYP IRM Maximum Forward Voltage 2.0 IF = 60A Maximum Reverse Leakage Current UNIT 2.5 IF = 30A VF MAX Volts IF = 30A, TJ = 150°C 2.0 VR = VR Rated 250 VR = VR Rated, TJ = 125°C 500 µA CT Junction Capacitance, VR = 200V 30 pF LS Series Inductance (Lead to Lead 5mm from Base) 10 nH USA APT Website - http://www.advancedpower.com 405 S.W. Columbia Street Bend, Oregon 97702-1035 Phone: (541) 382-8028 FAX: (541) 388-0364 F-33700 Merignac - France Phone: (33) 5 57 92 15 15 FAX: (33) 5 56 47 97 61 EUROPE Avenue J.F. Kennedy Bât B4 Parc Cadéra Nord 053-0017 Rev A Symbol APT2X30/2X31D120J DYNAMIC CHARACTERISTICS Symbol Characteristic MIN TYP MAX 85 trr1 Reverse Recovery Time, IF = 1.0A, diF /dt = -15A/µs, VR = 30V, TJ = 25°C 70 trr2 Reverse Recovery Time TJ = 25°C 70 trr3 IF = 30A, diF /dt = -240A/µs, VR = 650V TJ = 100°C 160 tfr1 Forward Recovery Time TJ = 25°C 255 tfr2 IF = 30A, diF /dt = 240A/µs, VR = 650V TJ = 100°C 255 IRRM1 Reverse Recovery Current TJ = 25°C 7 12 IRRM2 IF = 30A, diF /dt = -240A/µs, VR = 650V TJ = 100°C 12 20 Qrr1 Recovery Charge TJ = 25°C 660 Qrr2 IF = 30A, diF /dt = -240A/µs, VR = 650V TJ = 100°C 1640 Vfr1 Forward Recovery Voltage Vfr2 IF = 30A, diF /dt = 240A/µs, VR = 650V nC 15 TJ = 100°C 20 TJ = 25°C 245 TJ = 100°C 160 RY TJ = 25°C Volts A/µs IN IF = 30A, diF /dt = -240A/µs, VR = 650V (See Figure 10) ns Amps A Rate of Fall of Recovery Current diM/dt UNIT THERMAL AND MECHANICAL CHARACTERISTICS Characteristic / Test Conditions Junction-to-Case Thermal Resistance RθJA Junction-to-Ambient Thermal Resistance Torque 2500 RMS Voltage (50-60 Hz Sinusoidal Waveform from Terminals to Mounting Base for 1 Min.) Package Weight UNIT °C/W Volts 1.03 oz 29.2 gm 13.6 lb•in 1.5 N•m Maximum Torque (Mounting = 8-32 or 4mm Machine and Terminals = 4mm Machine) APT Reserves the right to change, without notice, the specifications and information contained herein. SOT-227 Package Outline 11.8 (.463) 12.2 (.480) 31.5 (1.240) 31.7 (1.248) 7.8 (.307) 8.2 (.322) r = 4.0 (.157) (2 places) 8.9 (.350) 9.6 (.378) Hex Nut M4 H100 (4 places) W=4.1 (.161) W=4.3 (.169) H=4.8 (.187) H=4.9 (.193) (4 places) 25.2 (0.992) 0.75 (.030) 12.6 (.496) 25.4 (1.000) 0.85 (.033) 12.8 (.504) 4.0 (.157) 4.2 (.165) (2 places) 1.95 (.077) 2.14 (.084) 3.3 (.129) 3.6 (.143) 14.9 (.587) 15.1 (.594) 30.1 (1.185) 30.3 (1.193) Anti-parallel Parallel APT2X30D120J APT2X31D120J Anode 2 Cathode 1 Cathode 2 Anode 2 Anode 1 Anode 1 38.0 (1.496) 38.2 (1.504) 053-0017 Rev A MAX 20 PR WT TYP 0.90 EL RθJC VIsolation MIN IM Symbol Dimensions in Millimeters and (Inches) ISOTOP® is a Registered Trademark of SGS Thomson. Cathode 2 Cathode 1