SN74ABT7819A 512 × 18 × 2 CLOCKED BIDIRECTIONAL FIRST-IN, FIRST-OUT MEMORY SCBS756 – MAY 2002 D D D D D D Member of the Texas Instruments Widebus Family Free-Running CLKA and CLKB Can Be Asynchronous or Coincident Read and Write Operations Synchronized to Independent System Clocks Two Separate 512 × 18 Clocked FIFOs Buffering Data in Opposite Directions IRA and ORA Synchronized to CLKA IRB and ORB Synchronized to CLKB D D D D D D Microprocessor Interface Control Logic Programmable Almost-Full/Almost-Empty Flag Fast Access Times of 9 ns With a 50-pF Load and Simultaneous Switching Data Outputs Data Rates up to 100 MHz Advanced BiCMOS Technology Package Options Include 80-Pin Plastic Quad Flatpack (PH) and 80-Pin Thin Plastic Quad Flatpack (PN) CSA W/RA GND WENA CLKA RENA ORA VCC VCC ORB RENB CLKB WENB GND W/RB CSB PH PACKAGE (TOP VIEW) 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 RSTA PENA AF/AEA HFA IRA GND A0 A1 VCC A2 A3 GND A4 A5 GND A6 A7 GND A8 A9 VCC A10 A11 GND 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 RSTB PENB AF/AEB HFB IRB GND B0 B1 VCC B2 B3 GND B4 B5 GND B6 B7 GND B8 B9 VCC B10 B11 GND A12 A13 V CC A14 A15 GND A16 A17 B17 B16 GND B15 B14 VCC B13 B12 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Widebus is a trademark of Texas Instruments. Copyright 2002, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 SN74ABT7819A 512 × 18 × 2 CLOCKED BIDIRECTIONAL FIRST-IN, FIRST-OUT MEMORY SCBS756 – MAY 2002 RENB CLKB WENB GND W/RB CSB RSTB PENB PENA RSTA CSA W/RA GND WENA CLKA RENA ORA VCC VCC ORB PN PACKAGE (TOP VIEW) 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 AF/AEA HFA IRA GND A0 A1 VCC A2 A3 GND A4 A5 GND A6 A7 GND A8 A9 VCC A10 1 60 2 59 3 58 4 57 5 56 6 55 7 54 8 53 9 52 10 51 11 50 12 49 13 48 14 47 15 46 16 45 17 44 18 43 19 42 20 41 AF/AEB HFB IRB GND B0 B1 VCC B2 B3 GND B4 B5 GND B6 B7 GND B8 B9 VCC B10 A11 GND A12 A13 V CC A14 A15 GND A16 A17 B17 B16 GND B15 B14 V CC B13 B12 GND B11 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 description A FIFO memory is a storage device that allows data to be written into and read from its array at independent data rates. The SN74ABT7819A is a high-speed, low-power, BiCMOS, bidirectional, clocked FIFO memory. Two independent 512 × 18 dual-port SRAM FIFOs (FIFOA, FIFOB) on the chip buffer data in opposite directions. Each FIFO has flags to indicate empty and full conditions, a half-full flag, and a programmable almost-full/almost-empty flag. The SN74ABT7819A is a clocked FIFO, which means each port employs a synchronous interface. All data transfers through a port are gated to the low-to-high transition of a continuous (free-running) port clock by enable signals. The continuous clocks for each port are independent of one another and can be asynchronous or coincident. The enables for each port are arranged to provide a simple bidirectional interface between microprocessors and/or buses with synchronous control. The state of the A0–A17 outputs is controlled by the port-A chip select (CSA) and the port-A write/read select (W/RA). When both CSA and W/RA are low, the outputs are active. The A0–A17 outputs are in the high-impedance state when either CSA or W/RA is high. Data is written to FIFOA–B from port A on the low-to-high transition of the port-A clock (CLKA) input when CSA is low, W/RA is high, the port-A write enable (WENA) is high, and the port-A input-ready (IRA) flag is high. Data is read from FIFOB–A to the A0–A17 outputs on the low-to-high transition of CLKA when CSA is low, W/RA is low, the port-A read enable (RENA) is high, and the port-A output-ready (ORA) flag is high. 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 SN74ABT7819A 512 × 18 × 2 CLOCKED BIDIRECTIONAL FIRST-IN, FIRST-OUT MEMORY SCBS756 – MAY 2002 description (continued) The state of the B0–B17 outputs is controlled by the port-B chip select (CSB) and the port-B write/read select (W/RB). When both CSB and W/RB are low, the outputs are active. The B0–B17 outputs are in the high-impedance state when either CSB or W/RB is high. Data is written to FIFOB–A from port B on the low-to-high transition of the port-B clock (CLKB) when CSB is low, W/RB is high, the port-B write enable (WENB) is high, and the port-B input-ready (IRB) flag is high. Data is read from FIFOA–B to the B0–B17 outputs on the low-to-high transition of CLKB when CSB is low, W/RB is low, the port-B read enable (RENB) is high, and the port-B output-ready (ORB) flag is high. The setup- and hold-time constraints for the chip selects (CSA, CSB) and write/read selects (W/RA, W/RB) enable write and read operations on memory and are not related to the high-impedance control of the data outputs. If a port read enable (RENA or RENB) and write enable (WENA or WENB) are set low during a clock cycle, the chip select and write/read select can switch at any time during the cycle to change the state of the data outputs. The input-ready (IR) and output-ready (OR) flags of a FIFO are two-stage synchronized to the port clocks for use as reliable control signals. CLKA synchronizes the status of the input-ready flag of FIFOA–B (IRA) and the output-ready flag of FIFOB–A (ORA). CLKB synchronizes the status of the input-ready flag of FIFOB–A (IRB) and the output-ready flag of FIFOA–B (ORB). When the IR flag of a port is low, the FIFO receiving input from the port is full and writes are disabled to its array. When the OR flag of a port is low, the FIFO that outputs data to the port is empty and reads from its memory are disabled. The first word loaded to an empty memory is sent to the FIFO output register at the same time its OR flag is asserted (high). When the memory is read empty and the OR flag is forced low, the last valid data remains on the FIFO outputs until the OR flag is asserted (high) again. In this way, a high on the OR flag indicates new data is present on the FIFO outputs. The SN74ABT7819A is characterized for operation from 0°C to 70°C. Function Tables PORT A SELECT INPUTS W/RA WENA RENA A0 A17 A0–A17 PORT A OPERATION PORT-A CLKA CSA X H X X X High Z None ↑ L H H X High Z Write A0–A17 to FIFOA–B ↑ L L X H Active Read FIFOB–A to A0–A17 PORT B SELECT INPUTS B0 B17 B0–B17 PORT B OPERATION PORT-B X High Z None H X High Z Write B0–B17 to FIFOB–A X H Active Read FIFOA–B to B0–B17 CLKB CSB W/RB WENB RENB X H X X ↑ L H ↑ L L POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3 SN74ABT7819A 512 × 18 × 2 CLOCKED BIDIRECTIONAL FIRST-IN, FIRST-OUT MEMORY SCBS756 – MAY 2002 logic symbol† CLKA CSA W/RA 76 & 80 OE1 79 77 & RENA 75 1 RSTA PENA IRA ORA HFA AF/AEA A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 2 5 74 4 3 7 Clock B & CLKB 65 OE2 66 Write Enable FIFOA–B Write Enable FIFOB–A & Read Enable FIFOB–A Read Enable FIFOA–B & Reset FIFOA–B Program Enable FIFOA–B Input-Ready Port A Output-Ready Port A Half-Full FIFOA–B Almost-Full/Empty FIFOA–B 68 70 Reset FIFOB–A Program Enable FIFOB–A Input–Ready Port B Output–Ready Port B Half–Full FIFOB–A Almost–Full/Empty FIFOB–A 0 0 8 64 63 60 71 61 62 58 57 10 55 11 54 13 52 14 51 16 49 17 48 19 1 20 46 2 Data 45 Data 22 43 23 42 25 40 26 39 28 37 29 36 31 34 32 33 17 17 † This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. Terminal numbers are for the PH package. 4 69 CSB W/RB & WENA Φ FIFO 512 × 18 × 2 SN74ABT7819A Clock A POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 WENB RENB RSTB PENB IRB ORB HFB AF/AEB B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 B11 B12 B13 B14 B15 B16 B17 SN74ABT7819A 512 × 18 × 2 CLOCKED BIDIRECTIONAL FIRST-IN, FIRST-OUT MEMORY SCBS756 – MAY 2002 functional block diagram PENA RENA WENA CSA W/RA CLKA RSTA Port-A Control Logic Read Pointer 18 Register 512 × 18 Dual-Port SRAM FIFOB–A Register 18 18 Write Pointer Flag Logic FIFOB–A ORA IRB AF/AEB HFB 8 A0–A17 B0–B17 8 IRA AF/AEA HFA Flag Logic FIFOA–B ORB Write Pointer 18 Register 512 × 18 Dual-Port SRAM FIFOA–B Register Read Pointer Port-B Control Logic RSTB CLKB CSB W/RB WENB RENB PENB POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 5 SN74ABT7819A 512 × 18 × 2 CLOCKED BIDIRECTIONAL FIRST-IN, FIRST-OUT MEMORY SCBS756 – MAY 2002 enable logic diagram (positive logic) CSA W/RA WENA WEN FIFOA–B A0–A17 (output enable) REN FIFOB–A RENA CSB W/RB WENB WEN FIFOB–A B0–B17 (output enable) REN FIFOA–B RENB Terminal Functions TERMINAL† NAME NO. A0–A17 7, 8, 10, 11, 13, 14, 16, 17, 19, 20, 22, 23, 25, 26, 28, 29, 31, 32 AF/AEA 3 I/O DESCRIPTION I/O Port-A data. The 18-bit bidirectional data port for side A. O FIFOA–B almost-full/almost-empty flag. Depth offsets can be programmed for AF/AEA or the default value of 128 can be used for both the almost-empty offset (X) and the almost-full offset (Y). AF/AEA is high when X or fewer words or (512 – Y) or more words are stored in FIFOA–B. AF/AEA is forced high when FIFOA–B is reset. AF/AEB 62 O FIFOB–A almost-full/almost-empty flag. Depth offsets can be programmed for AF/AEB or the default value of 128 can be used for both the almost-empty offset (X) and the almost-full offset (Y). AF/AEB is high when X or fewer words or (512 – Y) or more words are stored in FIFOB–A. AF/AEB is forced high when FIFOB–A is reset. B0–B17 58, 57, 55, 54, 52, 51, 49, 48, 46, 45, 43, 42, 40, 39, 37, 36, 34, 33 I/O Port-B data. The 18-bit bidirectional data port for side B. CLKA 76 I Port-A clock. CLKA is a continuous clock that synchronizes all data transfers through port A to its low-to-high transition and can be asynchronous or coincident to CLKB. CLKB 69 I Port-B clock. CLKB is a continuous clock that synchronizes all data transfers through port B to its low-to-high transition and can be asynchronous or coincident to CLKA. CSA 80 I Port-A chip select. CSA must be low to enable a low-to-high transition of CLKA to either write data from A0–A17 to FIFOA–B or read data from FIFOB–A to A0–A17. The A0–A17 outputs are in the high-impedance state when CSA is high. CSB 65 I Port-B chip select. CSB must be low to enable a low-to-high transition of CLKB to either write data from B0–B17 to FIFOB–A or read data from FIFOA–B to B0–B17. The B0–B17 outputs are in the high-impedance state when CSB is high. † Terminal numbers are for the PH package. 6 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 SN74ABT7819A 512 × 18 × 2 CLOCKED BIDIRECTIONAL FIRST-IN, FIRST-OUT MEMORY SCBS756 – MAY 2002 Terminal Functions (Continued) TERMINAL† NAME NO. I/O DESCRIPTION HFA 4 O FIFOA–B half-full flag. HFA is high when FIFOA–B contains 256 or more words and is low when FIFOA–B contains 255 or fewer words. HFA is set low after FIFOA–B is reset. HFB 61 O FIFOB–A half-full flag. HFB is high when FIFOB–A contains 256 or more words and is low when FIFOB–A contains 255 or fewer words. HFB is set low after FIFOB–A is reset. IRA 5 O Port-A input-ready flag. IRA is synchronized to the low-to-high transition of CLKA. When IRA is low, FIFOA–B is full and writes to its array are disabled. IRA is set low during a FIFOA–B reset and is set high on the second low-to-high transition of CLKA after reset. IRB 60 O Port-B input-ready flag. IRB is synchronized to the low-to-high transition of CLKB. When IRB is low, FIFOB–A is full and writes to its array are disabled. IRB is set low during a FIFOB–A reset and is set high on the second low-to-high transition of CLKB after reset. O Port-A output-ready flag. ORA is synchronized to the low-to-high transition of CLKA. When ORA is low, FIFOB–A is empty and reads from its array are disabled. The last valid word remains on the FIFOB–A outputs when ORA is low. Ready data is present for the A0–A17 outputs when ORA is high. ORA is set low during a FIFOB–A reset and goes high on the third low-to-high transition of CLKA after the first word is loaded to an empty FIFOB–A. ORA 74 ORB 71 O Port-B output-ready flag. ORB is synchronized to the low-to-high transition of CLKB. When ORB is low, FIFOA–B is empty and reads from its array are disabled. The last valid word remains on the FIFOA–B outputs when ORB is low. Ready data is present for the B0–B17 outputs when ORB is high. ORB is set low during a FIFOA–B reset and goes high on the third low-to-high transition of CLKB after the first word is loaded to an empty FIFOA–B. PENA 2 I AF/AEA program enable. After FIFOA–B is reset and before a word is written to its array, the binary value on A0–A7 is latched as an AF/AEA offset when PENA is low and CLKA is high. PENB 63 I AF/AEB program enable. After FIFOB–A is reset and before a word is written to its array, the binary value on B0–B7 is latched as an AF/AEB offset when PENB is low and CLKB is high. RENA 75 I Port-A read enable. A high level on RENA enables data to be read from FIFOB–A on the low-to-high transition of CLKA when CSA is low, W/RA is low, and ORA is high. RENB 70 I Port-B read enable. A high level on RENB enables data to be read from FIFOA–B on the low-to-high transition of CLKB when CSB is low, W/RB is low, and ORB is high. RSTA 1 I FIFOA–B reset. To reset FIFOA–B, four low-to-high transitions of CLKA and four low-to-high transitions of CLKB must occur while RSTA is low. This sets HFA low, IRA low, ORB low, and AF/AEA high. RSTB 64 I FIFOB–A reset. To reset FIFOB–A, four low-to-high transitions of CLKA and four low-to-high transitions of CLKB must occur while RSTB is low. This sets HFB low, IRB low, ORA low, and AF/AEB high. WENA 77 I Port-A write enable. A high level on WENA enables data on A0–A17 to be written into FIFOA–B on the low-to-high transition of CLKA when W/RA is high, CSA is low, and IRA is high. WENB 68 I Port-B write enable. A high level on WENB enables data on B0–B17 to be written into FIFOB–A on the low-to-high transition of CLKB when W/RB is high, CSB is low, and IRB is high. I Port-A write/read select. A high on W/RA enables A0–A17 data to be written to FIFOA–B on a low-to-high transition of CLKA when WENA is high, CSA is low, and IRA is high. A low on W/RA enables data to be read from FIFOB–A on a low-to-high transition of CLKA when RENA is high, CSA is low, and ORA is high. The A0–A17 outputs are in the high-impedance state when W/RA is high. I Port-B write/read select. A high on W/RB enables B0–B17 data to be written to FIFOB–A on a low-to-high transition of CLKB when WENB is high, CSB is low, and IRB is high. A low on W/RB enables data to be read from FIFOA–B on a low-to-high transition of CLKB when RENB is high, CSB is low, and ORB is high. The B0–B17 outputs are in the high-impedance state when W/RB is high. W/RA W/RB 79 66 † Terminal numbers are for the PH package. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 7 SN74ABT7819A 512 × 18 × 2 CLOCKED BIDIRECTIONAL FIRST-IN, FIRST-OUT MEMORY SCBS756 – MAY 2002 CLKA 1 CLKB 1 2 3 2 4 3 1 2 4 RSTA ÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎ ÏÏÏÏÏ ÏÏÏÏÏ ÏÏÏÏÏ IRA ORB HFA AF/AEA NOTE: FIFOB–A is reset in the same manner. Figure 1. Reset Cycle for FIFOA–B CLKA 1 IRA 0 CSA ÌÌÌÌÌ ÌÌÌÌÌÌÌ ÌÌ ÌÌÌÌÌ ÌÌÌÌÌÌÌ ÌÌ ÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌ ÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌ ÌÌÌÌÌÌ ÌÌÌ ÌÌÌÌÌÌÌÌ ÌÌÌ ÌÌ ÌÌÌÌÌÌ ÌÌÌ ÌÌÌÌÌÌÌÌ ÌÌÌ ÌÌ W/RA WENA A0–A17 Word 1† Word 2† Word 3† † Written to FIFOA–B Figure 2. Write Timing – Port A 8 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 Word 4† SN74ABT7819A 512 × 18 × 2 CLOCKED BIDIRECTIONAL FIRST-IN, FIRST-OUT MEMORY SCBS756 – MAY 2002 CLKB 1 IRB 0 CSB ÌÌÌÌÌÌ ÌÌÌÌÌÌÌÌ ÌÌÌ ÌÌÌÌÌÌ ÌÌÌÌÌÌÌÌ ÌÌÌ ÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌ ÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌ ÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌ ÌÌÌÌÌÌ ÌÌÌ ÌÌÌÌÌÌÌÌ ÌÌÌ ÌÌÌ ÌÌÌÌÌÌ ÌÌÌ ÌÌÌÌÌÌÌÌ ÌÌÌ ÌÌÌ W/RB WENB B0–B17 Word 1† Word 2† Word 3† Word 4† † Written to FIFOB–A Figure 3. Write Timing – Port B POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 9 SN74ABT7819A 512 × 18 × 2 CLOCKED BIDIRECTIONAL FIRST-IN, FIRST-OUT MEMORY SCBS756 – MAY 2002 CLKA 1 CSA 0 1 W/RA ÏÏÏÏÏÎÎÎÎÎ ÏÏÏÏÏÎÎÎÎÎ ÌÌÌÌÌ ÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌ ÌÌÌÌÌ ÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌ WENA tsu A0–A17 CLKB W1 1 2 3 ORB tpd tpd CSB W/RB ÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÎÎÎÎÎÎÎÎÎÎÎ ÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÎÎÎÎÎÎÎÎÎÎÎ ÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌ ÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌ RENB tpd W1 From FIFOA–B B0–B17 NOTE: Operation of FIFOB–A is identical to that of FIFOA–B. Figure 4. ORB-Flag Timing and First Data-Word Fall Through When FIFOA–B Is Empty 10 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 0 SN74ABT7819A 512 × 18 × 2 CLOCKED BIDIRECTIONAL FIRST-IN, FIRST-OUT MEMORY SCBS756 – MAY 2002 CLKB 1 CSB 0 1 W/RB RENB 0 ÏÏÏ ÎÎÎÎ ÏÏÏ ÎÎÎÎ From FIFOA–B B0–B17 CLKA 1 2 IRA tpd tpd 1 CSA 0 WENA ÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ 1 W/RA 0 A0–A17 ÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌ ÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌ NOTE: Operation of FIFOB–A is identical to that of FIFOA–B. ÌÌÌÌÌÌÌÌÌÌÌÌÌ ÌÌÌÌÌÌÌÌÌÌÌÌÌ To FIFOA–B Figure 5. Write-Cycle and IRA-Flag Timing When FIFOA–B Is Full POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 11 SN74ABT7819A 512 × 18 × 2 CLOCKED BIDIRECTIONAL FIRST-IN, FIRST-OUT MEMORY SCBS756 – MAY 2002 CLKA 1 ORA 0 CSA ÎÎÎÎ ÏÏÏÏÏÏÏ ÎÎÎÎ ÏÏÏÏÏÏÏ ÎÎÎÎ ÏÏÏÏÏÏÏ ÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌ ÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌ W/RA RENA tpd ten Word 1† A0–A17 tdis Word 2† Word 3† Word 4† † Read from FIFOB–A Figure 6. Read Timing – Port A CLKB 1 ORB 0 CSB ÎÎÎÎ ÏÏÏÏÏÏÏ ÎÎÎÎ ÏÏÏÏÏÏÏ ÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌ ÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌ W/RB RENB ten B0–B17 tpd Word 1‡ tdis Word 2‡ Word 3‡ ‡ Read from FIFOA–B Figure 7. Read Timing – Port B 12 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 Word 4‡ CLKA WENA ÌÌÌ ÌÌÌ ÌÌÌ ÌÌÌ ÌÌÌ ÌÌÌ ÌÌÌ ÌÌÌ ÌÌÌ ÌÌÌ ÌÌÌ ÌÌÌ ÌÌÌ ÌÌÌ ÌÌÌ ÌÌÌ ÌÌÌ ÌÌÌ ÌÌÌ ÌÌÌ ÌÌÌ ÌÌÌ ÌÌÌ ÌÌÌ ÌÌÌ ÌÌÌ ÌÌÌ ÌÌÌ ÌÌÌ ÌÌÌ ÌÌÌ ÌÌÌ ÌÌÌ ÌÌÌ ÌÌÌ ÌÌÌ ÌÌÌ IRA A0–A17 W1 WX+1 WX+2 W256 W257 W512–Y W513–Y W513 RENB ÌÌÌ ÌÌÌ ÌÌÌ ÌÌÌ • DALLAS, TEXAS 75265 ORB B0–B17 W1 W2 WY+1 WY+2 W257 W258 W512–X W513–X AF/AEA HFA Figure 8. FIFOA–B (HFA, AF/AEA) Asynchronous Flag Timing 13 SCBS756 – MAY 2002 NOTES: A. CSA, CSB = 0, W/RA = 1, W/RB = 0 B. X is the almost-empty offset and Y is the almost-full offset for AF/AEA. C. HFB and AF/AEB function in the same manner for FIFOB–A. SN74ABT7819A 512 × 18 × 2 CLOCKED BIDIRECTIONAL FIRST-IN, FIRST-OUT MEMORY POST OFFICE BOX 655303 CLKB SN74ABT7819A 512 × 18 × 2 CLOCKED BIDIRECTIONAL FIRST-IN, FIRST-OUT MEMORY SCBS756 – MAY 2002 offset values for AF/AE The AF/AE flag of each FIFO has two programmable limits: the almost-empty offset value (X) and the almost-full offset value (Y). They can be programmed from the input of the FIFO after it is reset and before a word is written to its memory. An AF/AE flag is high when its FIFO contains X or fewer words or (512 – Y) or more words. To program the offset values for AF/AEA, PENA is brought low after FIFOA–B is reset and only when CLKA is low. On the following low-to-high transition of CLKA, the binary value on A0–A7 is stored as the almost-empty offset value (X) and the almost-full offset value (Y). Holding PENA low for another low-to-high transition of CLKA reprograms Y to the binary value on A0–A7 at the time of the second CLKA low-to-high transition. During the first two CLKA cycles used for offset programming, PENA can be brought high only when CLKA is low. PENA can be brought high at any time after the second CLKA pulse used for offset programming returns low. A maximum value of 255 can be programmed for either X or Y (see Figure 9). To use the default values of X = Y = 128, PENA must be tied high. No data is stored in FIFOA–B while the AF/AEA offsets are programmed. The AF/AEB flag is programmed in the same manner, with PENB enabling CLKB to program the offset values taken from B0–B7.Figure 8 RESET CLKA 3 4 IRA PENA CSA W/RA WENA A0–A7 ÏÏÏÏÏÏÏ ÎÎÎ ÏÏÏÏÏÏÏÏÏÏ ÏÏÏÏÏÏÏ ÎÎÎ ÏÏÏÏÏÏÏÏÏÏ ÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏ ÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏ ÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏ ÏÏÏÏÏÏÏÏÏÏÏÏ ÏÏÏÏÏÏÏÏÏÏÏÏ ÏÏÏÏÏÏÏÏÏÏÏÏ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÌÌÌÌÌÌÌÌÌÌÌÌÌÌ ÌÌÌÌÌÌÌÌÌ ÌÌÌÌÌÌÌÌÌÌÌÌÌÌ ÌÌÌÌÌÌÌÌÌ X and Y Y Figure 9. Programming X and Y Separately for AF/AEA 14 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 SN74ABT7819A 512 × 18 × 2 CLOCKED BIDIRECTIONAL FIRST-IN, FIRST-OUT MEMORY SCBS756 – MAY 2002 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 7 V Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to VCC + 0.5 V Voltage range applied to any output in the high state or power-off state, VO . . . . . . . . . . . . . . –0.5 V to 5.5 V Current into any output in the low state, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 mA Input clamp current, IIK (VI < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –18 mA Output clamp current, IOK (VO < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –50 mA Package thermal impedance, θJA (see Note 2): PH package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72°C/W PN package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62°C/W Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed. 2. The package thermal impedance is calculated in accordance with JESD 51–7. recommended operating conditions MIN NOM MAX 4.5 5 5.5 UNIT VCC VIH Supply voltage VIL VI Low-level input voltage IOH IOL High-level output current VCC –12 mA Low-level output current 24 mA ∆t/∆v Input transition rise or fall rate 5 ns/V TA Operating free-air temperature 70 °C High-level input voltage 2 V 0.8 Input voltage V 0 0 V V electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER VIK TEST CONDITIONS VCC = 4.5 V, VCC = 4.5 V, II = –18 mA IOH = –3 mA VOH VCC = 5 V, VCC = 4.5 V, IOH = –3 mA IOH = –12 mA VOL II VCC = 4.5 V, VCC = 5.5 V, IOL = 24 mA VI = VCC or GND IOZH§ IOZL§ VCC = 5.5 V, VCC = 5.5 V, VO = 2.7 V VO = 0.5 V IO¶ VCC = 5.5 V, VO = 2.5 V Outputs high VCC = 5.5 5 5 V, V IO = 0 0, VI = VCC or GND ICC Ci Control inputs Cio A or B ports MIN TYP‡ MAX UNIT –1.2 V 2.5 V 3 2 0.5 –40 –100 µA 50 µA –50 µA –180 mA 15 Outputs low 95 Outputs disabled VI = 2.5 V or 0.5 V VO = 2.5 V or 0.5 V V ±1 mA 15 12 pF 14 pF ‡ All typical values are at VCC = 5 V, TA = 25°C. § The parameters IOZH and IOZL include the input leakage current. ¶ Not more than one output should be tested at a time, and the duration of the test should not exceed one second. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 15 SN74ABT7819A 512 × 18 × 2 CLOCKED BIDIRECTIONAL FIRST-IN, FIRST-OUT MEMORY SCBS756 – MAY 2002 timing requirements over recommended operating free-air temperature range (unless otherwise noted) (see Figures 1 through 10) fclock Clock frequency tw Pulse duration tsu th Setup time Hold time ’7819A-10 ’7819A-12 ’7819A-15 ’7819A-20 ’7819A-30 MIN MIN MIN MIN MIN MAX 100 CLKA, CLKB high or low MAX 80 67 MAX 50 4.5 6 8 11 A0–A17 before CLKA↑ and B0–B17 before CLKB↑ 2 3 4 5 5 CSA before CLKA↑ and CSB before CLKB↑ 6 6 6 7 7 W/RA before CLKA↑ and W/RB before CLKB↑ 6 6 6 7 7 WENA before CLKA↑ and WENB before CLKB↑ 4 4 4 5 5 RENA before CLKA↑ and RENB before CLKB↑ 5 5 5 5 6 PENA before CLKA↑ and PENB before CLKB↑ 3 3 4 5 5 RSTA or RSTB low before first CLKA↑ and CLKB↑† 3 3 4 5 5 A0–A17 after CLKA↑ and B0–B17 after CLKB↑ 0 0 0 0 0 CSA after CLKA↑ and CSB after CLKB↑ 0 0 0 0 0 W/RA after CLKA↑ and W/RB after CLKB↑ 0 0 0 0 0 WENA after CLKA↑ and WENB after CLKB↑ 0 0 0 0 0 RENA after CLKA↑ and RENB after CLKB↑ 0 0 0 0 0 PENA after CLKA low and PENB after CLKB low 2 2 2 2 2 RSTA or RSTB low after fourth CLKA↑ and CLKB↑† 3 3 3 4 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 MAX 33.3 4.5 † To permit the clock pulse to be utilized for reset purposes 16 MAX UNIT MHz ns ns ns SN74ABT7819A 512 × 18 × 2 CLOCKED BIDIRECTIONAL FIRST-IN, FIRST-OUT MEMORY SCBS756 – MAY 2002 switching characteristics over recommended ranges of supply voltage and operating free-air temperature, CL = 50 pF (unless otherwise noted) (see Figure 10) PARAMETER fmax tpd d tpd‡ tpd d FROM (INPUT) CLKA or CLKB tPLH MIN 80 67 MAX 50 MAX 33.3 6 8 4 9 4 10 4 12 4 14 6 8 4 9 4 10 4 12 4 14 CLKA↑ A0–A17 5 CLKB↑ B0–B17 5 CLKA↑ IRA 4 9 4 9 4 10 4 12 4 14 IRB 4 9 4 9 4 10 4 12 4 14 CLKA↑ ORA 3.5 9 3.5 9 3.5 10 3.5 12 3.5 14 CLKB↑ ORB 3.5 9 3.5 9 3.5 10 3.5 12 3.5 14 8 17 8 17 8 17 8 18 8 20 8 17 8 17 8 17 8 18 8 20 4 12 4 12 4 14 4 15 4 16 8 17 8 17 8 17 8 18 8 20 8 17 8 17 8 17 8 18 8 20 RSTA CLKA↑ CLKB↑ AF/AEA AF/AEB RSTB AF/AEB 4 12 4 12 4 14 4 15 4 16 CLKA↑ HFA 8 17 8 17 8 17 8 18 8 20 8 17 8 17 8 17 8 18 8 20 4 12 4 12 4 14 4 15 4 16 8 17 8 17 8 17 8 18 8 20 8 17 8 17 8 17 8 18 8 20 4 12 4 12 4 14 4 15 4 16 2.5 8 2.5 8 2.5 9 2.5 10 2.5 11 2.5 8 2.5 8 2.5 9 2.5 10 2.5 11 2.5 8 2.5 8 2.5 9 2.5 10 2.5 11 2.5 8 2.5 8 2.5 9 2.5 10 2.5 11 2.5 8 2.5 8 2.5 9 2.5 10 2.5 11 2.5 8 2.5 8 2.5 9 2.5 10 2.5 11 2.5 8 2.5 8 2.5 9 2.5 10 2.5 11 2.5 8 2.5 9 2.5 10 2.5 11 RSTA CLKB↑ RSTB W/RA CSB CSA W/RA CSB HFA HFB HFB A0 A17 A0–A17 B0 B17 B0–B17 A0 A17 A0–A17 B0 B17 B0–B17 ns ns CLKB↑ AF/AEA UNIT MHz 3 W/RB tdis di ’7819A-30 MIN MAX 3 CSA ten ’7819A-20 MIN MAX B0–B17 CLKA↑ tPLH tPHL ’7819A-15 MIN A0–A17 CLKB↑ tPHL 100 ’7819A-12 CLKB↑ CLKB↑ tpd d ’7819A-10 MIN TYP† MAX CLKA↑ CLKA↑ tPLH TO (OUTPUT) W/RB 2.5 8 † All typical values are at VCC = 5 V, TA = 25°C. ‡ This parameter is measured with a 30-pF load (see Figure 11). POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 ns ns ns ns ns ns ns 17 SN74ABT7819A 512 × 18 × 2 CLOCKED BIDIRECTIONAL FIRST-IN, FIRST-OUT MEMORY SCBS756 – MAY 2002 PARAMETER MEASUREMENT INFORMATION 7V PARAMETER S1 ten 500 Ω From Output Under Test Test Point CL = 50 pF (see Note A) tdis tpd 500 Ω S1 tPZH tPZL tPHZ tPLZ tPLH tPHL Open Closed Open Closed Open Open tw LOAD CIRCUIT 3V 3V Timing Input Input 1.5 V 0V 1.5 V 0V tsu VOLTAGE WAVEFORMS PULSE DURATION th 3V Data Input 1.5 V 3V 1.5 V 0V VOLTAGE WAVEFORMS SETUP AND HOLD TIMES Output Control 1.5 V 0V 3V 1.5 V 1.5 V 0V tPLH Output ≈3.5 V Output Waveform 1 S1 at 7 V 1.5 V VOH 1.5 V VOL Output Waveform 2 S1 at Open 1.5 V Figure 10. Load Circuit and Voltage Waveforms • DALLAS, TEXAS 75265 VOL VOH ≈0 V NOTE A: CL includes probe and jig capacitance. POST OFFICE BOX 655303 VOH – 0.3 V VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES 18 VOL + 0.3 V tPHZ tPZH tPHL 1.5 V 1.5 V tPLZ tPZL Input 1.5 V SN74ABT7819A 512 × 18 × 2 CLOCKED BIDIRECTIONAL FIRST-IN, FIRST-OUT MEMORY SCBS756 – MAY 2002 TYPICAL CHARACTERISTICS PROPAGATION DELAY TIME vs LOAD CAPACITANCE VCC = 5 V TA = 25°C RL = 500 Ω typ + 4 typ + 2 typ typ – 2 0 50 100 150 200 250 300 CL – Load Capacitance – pF Figure 11 SUPPLY CURRENT vs CLOCK FREQUENCY 160 140 I CC(f) – Supply Current – mA t pd – Propagation Delay Time – ns typ + 6 120 TA = 75°C CL = 0 pF VCC = 5.5 V VCC = 5 V 100 80 VCC = 4.5 V 60 40 20 10 15 20 25 30 35 40 45 50 55 60 65 70 fclock – Clock Frequency – MHz Figure 12 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 19 PACKAGE OPTION ADDENDUM www.ti.com 25-Feb-2005 PACKAGING INFORMATION Orderable Device Status (1) SN74ABT7819A-10PH SN74ABT7819A-10PN SN74ABT7819A-12PH SN74ABT7819A-12PN Pins Package Eco Plan (2) Qty Lead/Ball Finish MSL Peak Temp (3) Package Type Package Drawing ACTIVE QFP PH 80 66 None A42 Level-3-220C-168 HR ACTIVE LQFP PN 80 119 None CU NIPDAU Level-3-220C-168 HR ACTIVE QFP PH 80 66 None A42 Level-3-220C-168 HR ACTIVE LQFP PN 80 119 None CU NIPDAU Level-3-220C-168 HR SN74ABT7819A-15PH ACTIVE QFP PH 80 66 None A42 Level-3-220C-168 HR SN74ABT7819A-15PN ACTIVE LQFP PN 80 119 None CU NIPDAU Level-3-220C-168 HR SN74ABT7819A-20PH ACTIVE QFP PH 80 66 None A42 Level-3-220C-168 HR SN74ABT7819A-20PN ACTIVE LQFP PN 80 119 None CU NIPDAU Level-3-220C-168 HR SN74ABT7819A-30PH ACTIVE QFP PH 80 66 None A42 Level-3-220C-168 HR SN74ABT7819A-30PN ACTIVE LQFP PN 80 119 None CU NIPDAU Level-3-220C-168 HR (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - May not be currently available - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. None: Not yet available Lead (Pb-Free). Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Green (RoHS & no Sb/Br): TI defines "Green" to mean "Pb-Free" and in addition, uses package materials that do not contain halogens, including bromine (Br) or antimony (Sb) above 0.1% of total product weight. (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDECindustry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security Telephony www.ti.com/telephony Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright 2005, Texas Instruments Incorporated