AWT6113 PCS/CDMA 3.4V/28dBm Linear Power Amplifier Module PRELIMINARY DATA SHEET - Rev 1.4 FEATURES • InGaP HBT Technology • High Efficiency: 38% • Low Quiescent Current: 44 mA • Low Leakage Current in Shutdown Mode: <1 µA • Optimized for a 50 Ω System • Low Profile Surface Mount Package: 1.56mm max • CDMA 1XRTT Compliant • CDMA 1xEV-DO Compliant APPLICATIONS • PCS CDMA Wireless Handsets • Dual Band CDMA Wireless Handsets M7 Package 10 Pin 4mm x 4mm Surface Mount Module PRODUCT DESCRIPTION The AWT6113 is a high power, high efficiency amplifier module for PCS/CDMA wireless handset applications. The device is manufactured on an advanced InGaP HBT MMIC technology offering state-of-the-art reliability, temperature stability, and ruggedness. Selectable bias modes that optimize efficiency for different output power levels, and a shutdown mode with low leakage current, serve to increase handset talk and standby time. The self-contained 4mm x 4mm surface mount package incorporates matching networks optimized for output power, efficiency and linearity in a 50 Ω system. GND at slug (pad) VCC 1 10 VCC RFIN 2 9 GND GND 3 8 RFOUT 7 GND 6 GND VMODE 4 Bias Control VREF 5 Figure 1: Block Diagram 12/2002 AWT6113 GND VCC 1 10 VCC RFIN 2 9 GND GND 3 8 RFOUT VMODE 4 7 GND VREF 5 6 GND GND Figure 2: Pinout (X-ray Top View) Table 1: Pin Description 2 PIN NAME DESCRIPTION 1 V CC Supply Voltage 2 RFIN RF Input 3 GND Ground 4 VMODE Mode Control Voltage 5 VREF Reference Voltage 6 GND Ground 7 GND Ground 8 RFOUT RF Output 9 GND Ground 10 V CC Supply Voltage PRELIMINARY DATA SHEET - Rev 1.4 12/2002 AWT6113 ELECTRICAL CHARACTERISTICS Table 2: Absolute Minimum and Maximum Ratings PARAMETER MIN MAX UNIT Supply Voltage (VCC ) 0 +5 V Mode Control Voltage (VMODE) 0 +3.5 V Reference Voltage (VREF) 0 +3.5 V RF Input Power (PIN) - +10 dB m -40 +150 °C Storage Temperature (TSTG) Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability. Table 3: Operating Ranges PARAMETER MIN TYP MAX UNIT Operating Frequency (f) 1850 - 1910 MHz Supply Voltage (VCC) +3.2 +3.4 +4.2 V Reference Voltage (VREF) +2.75 0 +2.85 - +3.1 +0.5 V PA "on" PA "shut down" Mode Control Voltage (VMODE) +2.5 0 +2.85 - +3.1 +0.5 V Low Bias Mode High Bias Mode RF Output Power (POUT) +28.0 - - dB m Case Temperature (TC) -30 - +85 o COMMENTS C The device may be operated safely over these conditions; however, parametric performance is guaranteed only over the conditions defined in the electrical specifications. PRELIMINARY DATA SHEET - Rev 1.4 12/2002 3 AWT6113 Table 4: Electrical Specifications - High Bias Mode (TC = +25 °C, VCC = +3.4 V, VREF = +2.85 V, VMODE = 0 V, POUT = +28 dBm, 50 Ω system) MIN TYP MAX UNIT 26 28 30 dB Adjacent Channel Power (1) at ±1.25 MHz offset Primary Channel BW = 1.23 MHz Adjacent Channel BW = 30 kHz - -50 -47 dB c Adjacent Channel Power at ±2.25 MHz offset Primary Channel BW = 1.23 MHz Adjacent Channel BW = 30 kHz - -61 -57 dB c 36.5 38 - % Quiescent Current - 70 90 mA Reference Current - 6 8 mA through VREF pin Mode Control Current - 0 - mA through VMODE pin Leakage Current - <1 5 µA VCC = +4.2 V, VREF = 0 V VMODE = 0 V Noise in Receive Band - -135 -133 Harmonics 2fo 3fo - -46 -52 -30 -30 dB c Input Impedance - - 2:1 VSWR PARAMETER Gain Power-Added Efficiency (1) Spurious Output Level (all spurious outputs) Load mismatch stress with no permanent degradation or failure dBm/Hz 1930 MHz to 1990 MHz - - -65 dB c 8:1 - - VSWR Notes: (1) PAE and ACP limit applies to 1880 MHz. 4 COMMENTS PRELIMINARY DATA SHEET - Rev 1.4 12/2002 POUT <+28 dBm In-band load VSWR < 8:1 Out-of-band load VSWR < 8:1 Applies over all voltage and temperature operating ranges VCC = +5.0 V, PIN = +5 dBm Applies over full operating temperature range AWT6113 Table 5: Electrical Specifications - Low Bias Mode (TC = +25 °C, VCC = +3.4 V, VREF = +2.85 V, VMODE = +2.85 V, POUT = +16 dBm, 50 Ω system) MIN TYP MAX UNIT 23 25 27 dB Adjacent Channel Power at ±1.25 MHz offset Primary Channel BW = 1.23 MHz Adjacent Channel BW = 30 kHz - -48.5 -46 dB c Adjacent Channel Power at ±2.25 MHz offset Primary Channel BW = 1.23 MHz Adjacent Channel BW = 30 kHz - -66 -57 dB c 7.5 8.5 - % Quiescent Current - 44 54 mA Reference Current - 6 8 mA through VREF pin Mode Control Current - 0.3 0.5 mA through VMODE pin Leakage Current - <1 5 µA VCC = +4.2 V, VREF = 0 V VMODE = 0 V Noise in Receive Band - -141 -139 Harmonics 2fo 3fo - -48 -52 -30 -30 dB c Input Impedance - - 2:1 VSWR PARAMETER Gain Power-Added Efficiency COMMENTS dBm/Hz 1930 MHz to 1990 MHz PRELIMINARY DATA SHEET - Rev 1.4 12/2002 5 AWT6113 PERFORMANCE DATA 34 Figure 3: Large Signal Gain vs. Frequency +3.4 V Supply, High Bias Mode (TC = +25 °C, VCC = +3.4 V, VREF = +2.85 V, VMODE = 0 V, POUT = +28 dBm) 33 33 +85 °C +25 °C -30 °C 32 +85 °C +25 °C -30 °C 32 31 31 30 30 29 29 Gain (dB) Gain (dB) 34 Figure 4: Large Signal Gain vs. Frequency +3.4 V Supply, Low Bias Mode (TC = +25 °C, VCC = +3.4 V, VREF = +2.85 V, VMODE = +2.85 V, POUT = +16 dBm) 28 27 28 27 26 26 25 25 24 24 23 23 22 1840 1850 1860 1870 1880 1890 1900 1910 22 1840 1920 1850 1860 Frequency (MHz) 34 33 31 30 30 29 29 28 27 26 25 24 24 23 23 34 1890 1900 1910 Figure 6: Large Signal Gain vs. Frequency +4.2 V Supply, Low Bias Mode (TC = +25 °C, VCC = +4.2 V, VREF = +2.85 V, VMODE = +2.85 V, POUT = +16 dBm) +85 °C +25 °C -30 °C 22 1840 1920 1850 1860 1870 1880 1890 1900 1910 1920 Frequency (MHz) Frequency (MHz) Figure 7: Large Signal Gain vs. Frequency +3.2 V Supply, High Bias Mode (TC = +25 °C, VCC = +3.2 V, VREF = +2.85 V, VMODE = 0 V, POUT = +28 dBm) Figure 8: Large Signal Gain vs. Frequency +3.2 V Supply, Low Bias Mode (TC = +25 °C, VCC = +3.2 V, VREF = +2.85 V, VMODE = +2.85 V, POUT = +16 dBm) 33 34 33 +85 °C +25 °C -30 °C 32 30 29 29 Gain (dB) 31 30 28 27 28 27 26 26 25 25 24 24 23 23 1850 1860 1870 1880 1890 1900 1910 +85 °C +25 °C -30 °C 32 31 22 1840 1920 22 1840 1850 1860 Frequency (MHz) 6 1920 27 25 1880 1910 28 26 1870 1900 32 31 1860 1890 33 Gain (dB) Gain (dB) 32 Gain (dB) 34 +85 °C +25 °C -30 °C 1850 1880 Frequency (MHz) Figure 5: Large Signal Gain vs. Frequency +4.2 V Supply, High Bias Mode (TC = +25 °C, VCC = +4.2 V, VREF = +2.85 V, VMODE = 0 V, POUT = +28 dBm) 22 1840 1870 1870 1880 1890 Frequency (MHz) PRELIMINARY DATA SHEET - Rev 1.4 12/2002 1900 1910 1920 AWT6113 48 Figure 9: PAE vs. Frequency +3.4 V Supply, High Bias Mode (TC = +25 °C, VCC = +3.4 V, VREF = +2.85 V, VMODE = 0 V, POUT = +28 dBm) 46 15 +85 °C +25 °C -30 °C 44 13 Efficiency (%) Efficiency (%) 12 40 38 36 9 8 7 30 6 1850 1860 1870 1880 1890 1900 1910 5 1840 1920 1880 1890 1900 1910 Figure 12: PAE vs. Frequency +4.2 V Supply, Low Bias Mode (TC = +25 °C, VCC = +4.2 V, VREF = +2.85 V, VMODE = +2.85 V, POUT = +16 dBm) 15 +85 °C +25 °C -30 °C 1920 +85 °C +25 °C -30 °C 14 13 Efficiency (%) 12 38 36 11 10 9 34 8 32 7 30 6 1850 1860 1870 1880 1890 1900 1910 5 1840 1920 1850 1860 1870 1880 1890 1900 1910 Frequency (MHz) Frequency (MHz) Figure 13: PAE vs. Frequency +3.2 V Supply, High Bias Mode (TC = +25 °C, VCC = +3.2 V, VREF = +2.85 V, VMODE = 0 V, POUT = +28 dBm) Figure 14: PAE vs. Frequency +3.2 V Supply, Low Bias Mode (TC = +25 °C, VCC = +3.2 V, VREF = +2.85 V, VMODE = +2.85 V, POUT = +16 dBm) 15 44 1920 +85 °C +25 °C -30 °C 14 +85 °C +25 °C -30 °C 46 13 12 Efficiency (%) 42 40 38 36 11 10 9 34 8 32 7 30 6 28 1840 1870 Figure 11: PAE vs. Frequency +4.2 V Supply, High Bias Mode (TC = +25 °C, VCC = +4.2 V, VREF = +2.85 V, VMODE = 0 V, POUT = +28 dBm) 40 48 1860 Frequency (MHz) 42 28 1840 1850 Frequency (MHz) 44 Efficiency (%) 10 32 46 Efficiency (%) 11 34 48 +85 °C +25 °C -30 °C 14 42 28 1840 Figure 10: PAE vs. Frequency +3.4 V Supply, Low Bias Mode (TC = +25 °C, VCC = +3.4 V, VREF = +2.85 V, VMODE = +2.85 V, POUT = +16 dBm) 1850 1860 1870 1880 1890 1900 1910 1920 5 1840 1850 1860 1870 1880 1890 1900 1910 1920 Frequency (MHz) Frequency (MHz) PRELIMINARY DATA SHEET - Rev 1.4 12/2002 7 AWT6113 Figure 15: ACP1 vs. Frequency +3.4 V Supply, High Bias Mode (TC = +25 °C, VCC = +3.4 V, VREF = +2.85 V, VMODE = 0 V, DfACP = 1.25 MHz, POUT = +28 dBm) -42 -43 -45 -46 -47 -48 -49 -50 -51 -52 -45 -46 -47 -48 -49 -50 -51 -52 -53 -54 1840 +85 °C +25 °C -30 °C -44 Adjacent Channel Power (dB) Adjacent Channel Power (dB) -42 -43 +85 °C +25 °C -30 °C -44 Figure 16: ACP1 vs. Frequency +3.4 V Supply, Low Bias Mode (TC = +25 °C, VCC = +3.4 V, VREF = +2.85 V, VMODE = +2.85 V, DfACP = 1.25 MHz, POUT = +16 dBm) -53 1850 1860 1870 1880 1890 1900 1910 -54 1840 1920 1850 1860 Frequency (MHz) -53 -57 -58 -59 -60 -61 -47 -48 -49 -50 -51 -52 -53 1900 1910 +85 °C +25 °C -30 °C -46 -63 1890 -54 1840 1920 1850 1860 Frequency (MHz) -43 -47 -48 -49 -50 -51 -47 -48 -49 -50 -51 -52 -53 1900 1910 +85 °C +25 °C -30 °C 1920 -54 1840 1850 1860 Frequency (MHz) 8 1920 -46 -53 1890 1910 -45 -52 1880 1900 Figure 20: ACP1 vs. Frequency +3.2 V Supply, Low Bias Mode (TC = +25 °C, VCC = +3.2 V, VREF = +2.85 V, VMODE = +2.85 V, DfACP = 1.25 MHz, POUT = +16 dBm) -42 Adjacent Channel Power (dB) Adjacent Channel Power (dB) -46 1870 1890 -44 -45 1860 1880 -43 +85 °C +25 °C -30 °C -44 1850 1870 Frequency (MHz) Figure 19: ACP1 vs. Frequency +3.2 V Supply, High Bias Mode (TC = +25 °C, VCC = +3.2 V, VREF = +2.85 V, VMODE = 0 V, DfACP = 1.25 MHz, POUT = +28 dBm) -42 -54 1840 1920 -45 -62 1880 1910 Figure 18: ACP1 vs. Frequency +4.2 V Supply, Low Bias Mode (TC = +25 °C, VCC = +4.2 V, VREF = +2.85 V, V-42 MODE = +2.85 V, DfACP = 1.25 MHz, POUT = +16 dBm) Adjacent Channel Power (dB) Adjacent Channel Power (dB) -56 1870 1900 -44 -55 1860 1890 -43 +85 °C +25 °C -30 °C -54 1850 1880 Frequency (MHz) Figure 17: ACP1 vs. Frequency +4.2 V Supply, High Bias Mode (TC = +25 °C, VCC = +4.2 V, VREF = +2.85 V, VMODE = 0 V, DfACP = 1.25 MHz, POUT = +28 dBm) -52 -64 1840 1870 1870 1880 1890 Frequency (MHz) PRELIMINARY DATA SHEET - Rev 1.4 12/2002 1900 1910 1920 AWT6113 Figure 21: ACP2 vs. Frequency +3.4 V Supply, High Bias Mode (TC = +25 °C, VCC = +3.4 V, VREF = +2.85 V, VMODE = 0 V, DfACP = 2.25 MHz, POUT = +28 dBm) -56 -58 -62 -64 -66 -68 -70 -72 -62 -64 -66 -68 -70 -72 -74 -74 -76 -76 -78 1840 1850 1860 1870 1880 1890 1900 1910 +85 °C +25 °C -30 °C -60 Adjacent Channel Power (dB) Adjacent Channel Power (dB) -58 +85 °C +25 °C -30 °C -60 Figure 22: ACP2 vs. Frequency +3.4 V Supply, Low Bias Mode (TC = +25 °C, VCC = +3.4 V, VREF = +2.85 V, VMODE = +2.85 V, DfACP = 2.25 MHz, POUT = +16 dBm) -56 -78 1840 1920 1850 1860 Frequency (MHz) -58 -64 -66 -68 -70 -72 -66 -68 -70 -72 -74 -76 1900 1910 +85 °C +25 °C -30 °C -64 -76 1890 -78 1840 1920 1850 1860 Frequency (MHz) -58 -64 -66 -68 -70 -72 1920 -64 -66 -68 -70 -72 -74 -76 1900 1910 +85 °C +25 °C -30 °C -62 -76 1890 1910 -56 -74 1880 1900 -60 -62 1870 1890 Figure 26: ACP2 vs. Frequency +3.2 V Supply, Low Bias Mode (TC = +25 °C, VCC = +3.2 V, VREF = +2.85 V, VMODE = +2.85 V, DfACP = 2.25 MHz, POUT = +16 dBm) Adjacent Channel Power (dB) Adjacent Channel Power (dB) -60 1860 1880 -58 +85 °C +25 °C -30 °C 1850 1870 Frequency (MHz) Figure 25: ACP2 vs. Frequency +3.2 V Supply, High Bias Mode (TC = +25 °C, VCC = +3.2 V, VREF = +2.85 V, V MODE = 0 V, DfACP = 2.25 MHz, POUT = +28 dBm) -56 -78 1840 1920 -62 -74 1880 1910 -56 -60 -62 1870 1900 Figure 24: ACP2 vs. Frequency +4.2 V Supply, Low Bias Mode (TC = +25 °C, VCC = +4.2 V, VREF = +2.85 V, VMODE = +2.85 V, DfACP = 2.25 MHz, POUT = +16 dBm) Adjacent Channel Power (dB) Adjacent Channel Power (dB) -60 1860 1890 -58 +85 °C +25 °C -30 °C 1850 1880 Frequency (MHz) Figure 23: ACP2 vs. Frequency +4.2 V Supply, High Bias Mode (TC = +25 °C, VCC = +4.2 V, VREF = +2.85 V, V MODE = 0 V, DfACP = 2.25 MHz, POUT = +28 dBm) -56 -78 1840 1870 1920 -78 1840 1850 1860 Frequency (MHz) 1870 1880 1890 1900 1910 1920 Frequency (MHz) PRELIMINARY DATA SHEET - Rev 1.4 12/2002 9 AWT6113 APPLICATION INFORMATION To ensure proper performance, refer to all related Application Notes on the ANADIGICS web site: http://www.anadigics.com Shutdown Mode The power amplifier may be placed in a shutdown mode by applying logic low levels (see Operating Ranges table) to both the VREF and VMODE voltages. Bias Modes The power amplifier may be placed in either a Low Bias mode or a High Bias mode by applying the appropriate logic level (see Operating Ranges table) to the VMODE voltage. The Bias Control table lists the recommended modes of operation for various applications. Table 6: Bias Control POUT LE V E LS BIAS MODE CDMA - low power <+16 dBm Low +2.85 V +2.85 V CDMA - high power >+16 dBm High +2.85 V 0V - Shutdown 0V 0V APPLICATION Shutdown V R EF VCC1 C9 22uF tantalum VCC2 C1 0.01uF C4 0.01uF RF IN VMODE VREF C2 0.01uF 1 VCC 2 VCC 10 3 RFIN GND 9 GND RFOUT 8 4 VMODE GND 7 5 VREF GND 6 GND at slug Figure 27: Application Circuit Schematic 10 VMODE PRELIMINARY DATA SHEET - Rev 1.4 12/2002 C8 22uF tantalum RF OUT AWT6113 PACKAGE OUTLINE Figure 28: M7 Package Outline - 10 Pin 4mm x 4mm Surface Mount Module BBB Figure 29: Branding Specification PRELIMINARY DATA SHEET - Rev 1.4 12/2002 11 AWT6113 COMPONENT PACKAGING Figure 30: Tape & Reel Packaging Table 7: Tape & Reel Dimensions 12 PACKAGE TYPE TAPE WIDTH POCKET PITCH REEL CAPACITY MAX REEL DIA 4mm X 4mm 12mm 8mm 2500 13" PRELIMINARY DATA SHEET - Rev 1.4 12/2002 AWT6113 NOTES PRELIMINARY DATA SHEET - Rev 1.4 12/2002 13 AWT6113 NOTES 14 PRELIMINARY DATA SHEET - Rev 1.4 12/2002 AWT6113 NOTES PRELIMINARY DATA SHEET - Rev 1.4 12/2002 15 AWT6113 ORDERING INFORMATION ORDER NUMBER TEMPERATURE RANGE PACKAGE DESCRIPTION COMPONENT PACKAGING AWT6113M7P8 -30 oC to +110 oC 10 Pin 4mm x 4mm Surface Mount Module Tape and Reel, 2500 pieces per Reel ANADIGICS, Inc. 141 Mount Bethel Road Warren, New Jersey 07059, U.S.A. Tel: +1 (908) 668-5000 Fax: +1 (908) 668-5132 URL: http://www.anadigics.com E-mail: [email protected] IMPORTANT NOTICE ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice. The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to change prior to a product’s formal introduction. Information in Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers to verify that the information they are using is current before placing orders. WARNING ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS product in any such application without written consent is prohibited. 16 PRELIMINARY DATA SHEET - Rev 1.4 12/2002