SB1314-V Semiconductor Chip LED Lamp Features • • • • 1.6mm(L)×0.8mm small size surface mount type Thin package of 0.4mm(H) thickness Transparent clear lens optic Low power consumption type chip LED Applications • • • • LCD backlighting Keypad backlighting Symbol backlighting Front panel indicator lamp Outline Dimensions unit : KLB-2001-001 mm 1 SB1314-V Absolute maximum ratings Characteristic Symbol Ratings Unit Power Dissipation PD 80 mW Forward Current IF 20 mA IFP 50 mA Reverse Voltage VR 4 V Operating Temperature Topr -25∼80 ℃ Storage Temperature Tstg -30∼100 ℃ 1 * Peak Forward Current 2 240℃ for 5 seconds * Soldering Temperature Tsol *1.Duty ratio = 1/16, Pulse width = 0.1ms *2. Recommended soldering Temperature Profile Temp(℃) Peak time max 10sec Peak Temp max 240℃ 1~ 4℃/sec 220℃ 140~ 160℃ -2~ -6℃/sec Solder area max. 50sec Preheating area 120 1~4℃/sec Time(sec) Electrical Characteristics Characteristic Symbol Test Condition Min Typ Max Unit Forward Voltage VF IF= 20mA - 3.4 4.0 V Luminous Intensity IV IF= 20mA 17 40 68 mcd λP Δλ IR IF= 20mA - 470 - nm IF= 20mA - 35 - nm VR=4V - - 10 uA - ±65 - - ±70 - Peak Wavelength Spectrum Bandwidth Reverse Current Half Angle θ1/2 X Y IF= 20mA KLB-2001-001 deg 2 SB1314-V Characteristic Diagrams Fig. 2 IV - IF Luminous Intensity Iv [mcd] Forward Current IF [mA] Fig. 1 IF - VF Forward Voltage VF [V] Fig.4 Spectrum Distribution Forward Relative Intensity [%] Current IF [mA] Fig. 3 IF – Ta Forward Current IF [mA] Wavelength λ [nm] Ambient Temperature Ta [℃] Fig. 5-1 Radiation Diagram(X) Fig. 5-2 Radiation Diagram(Y) Relative Luminous Intensity Iv [%] Relative Luminous Intensity Iv [%] KLB-2001-001 3 SB1314-V These AUK products are intended for usage in general electronic equipments(Office and communication equipment, measuring equipment, domestic electrification, etc.). Please make sure that you consult with us before you use these AUK products in equipments which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, traffic signal, combustion central, all types of safety device, etc.). AUK cannot accept liability to any damage which may occur in case these AUK products were used in the mentioned equipments without prior consultation with AUK. KLB-2001-001 4