PW090XS2 Version : 1.1 TECHNICAL MODEL SPECIFICATION NO. : PW090XS2 Customer’s Confirmation Customer Date By PVI’s Confirmation Confirmed By Prepared By PRIME VIEW INTERNATIONAL CO.,LTD. 3,LI SHIN RD. 1,SCIENCE-BASED INDUSTRIAL PARK,HSINCHU,TAIWAN,R.O.C. http://www.pvi.com.tw Date : Oct. 08 , 2004 This technical specification is subject to change without notice. Please return 1 copy with your signature on this page for approval. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:1 PW090XS2 TECHNICAL SPECIFICATION CONTENTS NO. ITEM PAGE - Cover 1 - Contents 2 1 Application 3 2 Features 3 3 Mechanical Specifications 3 4 Mechanical Drawing of TFT-LCD module 4 5 Input / Output Terminals 5 6 Pixel Arrangement and input connector pin NO. 6 7 Absolute Maximum Ratings 7 8 Electrical Characteristics 7 9 Power Sequence 17 10 Optical Characteristics 17 11 Handling Cautions 21 12 Reliability Test 22 13 Indication of Lot Number Label 22 14 Block Diagram 23 15 Packing 24 - Revision History 25 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:2 PW090XS2 1. Application This technical specification applies to 9.0” color TFT-LCD module, PW090XS2. The applications of the panel are car TV, portable DVD, GPS, multimedia applications and others AV system. 2. Features . Pixel in stripe configuration . Compatible with NTSC and PAL system . Slim and compact . High Brightness . Wide Viewing Angle . Up / Down and Left / Right Image Reversion . Support Multi Video Display Mode (With PVI timing controller : PVI-1004D) 3. Mechanical Specifications Parameter Screen Size Display Format Active Area Dot Pitch Pixel Configuration Outline Dimension Surface Treatment Weight Specifications 9.0 (16 : 8.3 diagonal) 1920 (H)×220 (V) 202.56 (H)×105.27 (V) 0.1055 (H)×0.4785 (V) Stripe 219.4 (W)×120.8 (H)×6.9 (D) (typ.) Anti-Glare + WV film 270±3 Unit Inch Dot mm mm mm g The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:3 PW090XS2 M001-033-01 PW090XS2 VIEW "A" (SCALE: 2/1) Patrick Lin 4. Mechanical Drawing of TFT-LCD Module The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:4 PW090XS2 5. Input / Output Terminals LCD Module Connector FPC Down Connect , 30 Pins , Pitch : 0.5 mm Pin No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Symbol GND VCC NC VEE NC VGH NC STVD STVU CKV U/D OE3 OE2 OE1 VCOM STHL VSS2 VR VG VB VSS1 VDD2 CPH1 CPH2 CPH3 VDD1 R/L NC OEH STHR I/O I I I I/O I/O I I I I I I I/O I I I I I I I I I I I I/O Description Ground for logic circuit Supply voltage of logic control circuit for gate driver No connection Negative power for gate driver No connection Positive power for gate driver No connection Vertical start pulse Vertical start pulse Shift clock for gate driver Up / Down Control for gate driver Output enable for gate driver Output enable for gate driver Output enable for gate driver Common electrode voltage Start pulse for source driver Ground for analog circuit Video Input R Video Input G Video Input B Ground for digital circuit Supply power for analog circuit Sampling and shift clock for source driver Sampling and shift clock for source driver Sampling and shift clock for source driver Supply power for digital circuit Left / Right Control for source driver No Connection Output enable for source driver Start pulse for source driver Note 5-1 U/D STVD Vcc Input GND output STVU output input scanning direction down to up up to down Note 5-2 R/L STHL Vcc output GND input STHR input output scanning direction left to right right to left Remark Note 5-3 Note 5-4 Note 5-5 Note 5-1 Note 5-1 Note 5-2 Note 5-6 Note 5-7 Note 5-2 Note 5-2 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:5 PW090XS2 The definitions of Note 5-1,5-2 U/D(PIN 11)=Low R/L(PIN 27)=High U/D(PIN 11)=High R/L(PIN 27)=Low Note 5-3 : VCC TYP.＝+3.3V Note 5-4 : VEE TYP.＝-12V Note 5-5 : VGH TYP.＝+17V Note 5-6 : VDD2 TYP.＝+5V Note 5-7 : VDD1 TYP.＝+3.3V 6. Pixel Arrangement and input connector pin NO. Line 1 Line 1920 Row 1 R G B R G B R G B R G B Row 2 R G B R G B R G B R G B Row 3 R G B R G B R G B R G B Row 4 R G B R G B R G B R G B Row 219 R G B R G B R G B R G B Row 220 R G B R G B R G B R G B Gate driver Source driver Input FPC Pin 30 Pin 1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:6 PW090XS2 7. Absolute Maximum Ratings The followings are maximum values , which if exceeded, may cause faulty operation or damage to the unit. Parameter Symbol VDD2 MIN. -0.3 MAX. +5.8 Unit V VDD1 -0.3 +7.0 V VCC -0.3 +6.0 V VGH-VEE -0.3 +40.0 V H Level VGH -0.3 +25.0 V L Level VEE -16 +0.3 V -0.2 VDD1+0.2 V Storage Temperature -30 +80 ℃ Operation Temperature -20 +80 ℃ Supply Voltage For Source Driver Supply Voltage For Gate Driver Analog Signal Input Level VR,VG,VB Remark Note 7-1 Note 7-2 Notes 7-1 : Analog Input Voltage means VR,VG,VB. Notes 7-2 : Optical characteristics shown in Table 10-1 are measured under Ta=+25℃. 8. Electrical Characteristics 8-1) Recommended Driving condition for TFT-LCD panel Parameter Supply Driver Voltage For Symbol Source Analog VDD2 VDD1 Logic H level VGH MIN. +4.5 +3.0 +15 Typ. +5.0 +3.3 +17 MAX. Unit +5.5 V +3.6 V +19 V L level -13.0 -12 -10.5 Supply Voltage For Gate Driver Analog Signal input Level Digital input voltage Digital output voltage Logic Amplitud H level L level H level L level VEE DC V VEE AC +6.0 VP-P VCC +3.0 +3.3 +3.6 +0.3 VCC-0.3 0.7 VDD1 VDD1 -0.3 - 0.3 VDD1 0.7 VDD1 VDD1 -0.3 - 0.3 VDD1 V V V V V V VIH VIL VOH VOL VCOM AC - +6.0 - VCOM DC 1.5 1.7 1.9 VCOM Remark DC Component of VEE AC Component of VEE AC Component VP-P of V COM DC Component V of VCOM Note 8-1 Note 8-1 : PVI strongly suggests that the VCOM DC level shall be adjustable , and the adjustable level range is 1.7V±1V , every module’s VCOM DC level shall be carefully adjusted to show a best image performance. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:7 PW090XS2 8-2) Recommended driving condition for back light Parameter Lamp voltage Lamp current Lamp frequency Kick-off voltage(25℃) (Reference Value) Kick-off voltage(0℃) (Reference Value) Symbol VL IL PL Vs Min. 589 3 40 Typ. 654 6 55 Max. 720 8 80 Unit Vrms mA KHz 1330 Vrms Ta= 25 ℃ Remark IL=6mA Note 8-2 Note 8-3 Note 8-4 Vs 1570 Vrms Note 8-2 : In order to satisfy the quality of B/L , no matter use what kind of inverter , the output lamp current must between Min. and Max. to avoid the abnormal display image caused by B/L. Note 8-3 : The waveform of lamp driving voltage should be as closed to a perfect sine wave as possible. Note 8-4 : The Kick-off times≧1sec. Back Light driving Back Light Connector : JST BHSR-02VS-1, Pin No. : 2 , Pitch : 3.5 mm Pin No Symbol Description 1 VL1 Input terminal (Hi voltage side) 2 VL2 Input terminal (Low voltage side) Remark Note 8-5 Note 8-5 : Low voltage side of back light inverter connects with Ground of inverter circuits. 8-3) Power Consumption Parameter Symbol Conditions TYP. Supply current for Gate Driver (Hi level) IGH VGH ＝+17V 0.11 Supply current for Gate Driver (Low level) IEE VEE ＝-12V 0.13 Supply current for Source Driver(Digital) IDD1 VDD1 ＝+3.3V 2.4 Supply current for Source Driver(Analog) IDD2 VDD2 ＝+5V 14 Supply current for Gate Driver (Digital) ICC VCC ＝+3.3V 0.15 LCD Panel Power Consumption 81.85 Back Light Lamp Power Consumption 3.92 MAX 0.17 0.20 6.0 20 0.225 125.83 Ta= 25 ℃ Remark Unit mA mA VEE center voltage mA mA mA mW Note 8-6 W Note 8-7 Note 8-6 : The power consumption for back light is not included. Note 8-7 : Back light lamp power consumption is calculated by IL×VL. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:8 PW090XS2 8-4) Timing Characteristics Of Input Signals Characteristics Rising time Falling time High and low level pulse width CPH pulse duty STH setup time STH hold time STH pulse width STH period OEH pulse width Sample and hold disable time OEV pulse width CKV pulse width Clean enable time Horizontal display timing range STV setup time STV hold time STV pulse width Horizontal lines per field Vertical display start Vertical display timing range VCOM rising time VCOM falling time VCOM delay time RGB delay time Symbol tr tf tCPH tCWH tSUH tHDH tSTH tH tOEH tDIS1 tOEV tCKV tDIS2 tDH tSUV tHDV tSTV tV tSV tDV trCOM tfCOM tDCOM tDRGB Min. 73 40 20 20 61.5 400 400 256 Typ. 78 50 1 63.5 2.08 5.26 16 32 8.02 640 262 10 220 - Max. 10 10 83 60 65.5 1 268 5 5 3 1 Unit ns ns ns % ns ns tCPH μs μs μs μs μs μs tCPH/3 ns ns tH tH tH tH μs μs μs μs Remark CPH1~CPH3 CPH1~CPH3 STHR,STHL STHR,STHL STHR,STHL STHR,STHL OEH OEV CKV STVU,STVD STVU,STVD STVU,STVD The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:9 PW090XS2 10% tr 90% 90% tf 10% 8-5) Signal Timing Waveforms CPH3 (L) CPH2 (L) CPH1 STHL(R) 50% tCWH 50% tCPH tSUH tSTH tHDH g n i m i t k c o l c g n i l p m a S 1 8 . g i F The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:10 Fig. 8-2 Horizontal display timing range CPH1 Output (STHR/STHL) Input (STHL/STHR) tDH PW090XS2 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:11 VEE DC VEE Fig. 8-3 (a) Horizontal timing VIAC Blank V(R,G,B) VIDC VC DC VCOM CKV OE 1,2,3 STHL(R) OEH (HSY) Black 1H VIA tH White Blank Black VEE AC VC AC White PW090XS2 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:12 V(R,G,B) VEE DC VEE VCOM CKV OE 1,2,3 STHL(R) OEH (HSY) Fig. 8-3 (b) Detail horizontal timing Note : The falling edge of OEV should be synchronized with the falling edge of OEH tDRGB trCOM tDIS2 tOEV 10% 90% 50% tOEH tDCOM tCKV tDIS1 1H VEE AC tSTH 90% 10% tfCOM PW090XS2 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:13 Fig. 8-4 Vertical shift clock timing CKV STVU(D) tSUV 1H tCKV tHDV PW090XS2 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:14 PW090XS2 VCOM (Even field) VCOM (Odd field) STVU (VSY) (HSY) V(R,G,B) Display on panel first line Fig. 8-5 (a) Vertical timing (From Up to Down) tsv Vertical timing (From up to down) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:15 PW090XS2 VCOM (Even field) VCOM (Odd field) STVD (VSY) (HSY) V(R,G,B) Display on panel first line Fig. 8-5 (b) Vertical timing (From Down to Up) tsv Vertical timing (From down to up) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:16 PW090XS2 9. Power on Sequence The Power on Sequence only effect by VCC,VSS,VDD,VEE and VGH, the others do not care. VGH VDD,VCC VSS(0V) VEE OFF OFF ON T1 T3 Logic signal RGB-Video signal T2 T4 1) 10ms≦T1<T2 2) 0ms<T3≦T4≦10ms 10. Optical Characteristics 10-1) Specification Parameter Viewing Angle Symbol Horizontal θ21,θ22 θ12 Vertical θ11 Contrast Ratio Response time Rise Fall Brightness Uniformity White Chromaticity Lamp Life Time +25℃ CR Tr Tf U x y Condition CR≧10 MIN. 55 35 50 At optimized 200 Viewing angle θ=0° θ=0° Ta = 25℃ Remarks TYP. MAX. Unit 60 deg 40 deg Note 10-1 55 deg 350 Note 10-2 15 30 ms Note 10-4 25 50 ms 330 400 cd/㎡ Note 10-3 70 75 % Note 10-5 0.280 0.310 0.340 Note 10-3 0.300 0.330 0.360 20000 30000 hr The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:17 PW090XS2 Note 10-1 : The definitions of viewing angles Luminance when Testing point is White Luminance when Testing point is Black (Testing configuration see 10-2 ) Contrast Ratio is measured in optimum common electrode voltage. Note 10-2 : CR ＝ Note 10-3 : 1.Topcon BM-7(fast) luminance meter 2° field of view is used in the testing (after 20~30 minutes operation). 2.Lamp current : 6 mA 3.Inverter model : TDK-347. Note 10-4 : The definition of response time: White Black White 100% 90% Brightness 10% 0% Tr Tf The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:18 PW090XS2 Note 10-5 : The uniformity of LCD is defined as The Minimum Brightness of the 9 testing Points U= The Maximum Brightness of the 9 testing Points Luminance meter : BM-5A or BM-7 fast (TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module The test pattern is white (Gray Level 63). 1/6 2/6 2/6 1/6 1/6 2/6 2/6 1/6 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:19 PW090XS2 10-2) Testing configuration BM-7(fast) Caution: 1. Environmental illumination≦1 lux 2. Before test CR, Vcom voltage must be adjusted carefully to get the best 500mm CR. R,G,B signal input Pattern generator LCD Backlight LCD Display Testing Point Pattern A Pattern B R, G, B Waveform of Pattern A at Testing Point 63.6us RGB waveform Vcom 63.6us R, G, B Waveform of Pattern B at Testing Point 63.6us Testing Point 63.6us RGB waveform Vcom RGB Signal Level =4.0 Vp-p(white to black) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:20 PW090XS2 11. Handling Cautions 11-1) Mounting of module a) Please power off the module when you connect the input/output connector. b) Please connect the ground pattern of the inverter circuit surely. If the connection is not perfect, some following problems may happen possibly. 1. The noise from the backlight unit will increase. 2. The output from inverter circuit will be unstable. 3. In some cases a part of module will heat. c) Polarizer which is made of soft material and susceptible to flaw must be handled carefully. d) Protective film (Laminator) is applied on surface to protect it against scratches and dirt. It is recommended to peel off the laminator before use and taking care of static electricity. 11-2) Precautions in mounting a) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. b) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. c) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. d) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 11-3) Others a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) Store the module at a room temperature place. c) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e) Observe all other precautionary requirements in handling general electronic components. 11-4) Polarizer mark The polarizer mark is to describe the direction of wide view angle film how to mach up with the rubbing direction. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:21 PW090XS2 12. Reliability Test No. 1 2 3 4 5 6 Test Item High Temperature Storage Test Low Temperature Storage Test High Temperature Operation Test Low Temperature Operation Test High Temperature & High Humidity Operation Test Thermal Cycling Test (non-operating) 7 Vibration Test (non-operating) 8 Shock Test (non-operating) 9 Electrostatic Discharge Test (non-operating) Test Condition Ta = +80℃, 240 hrs Ta = -30℃, 240 hrs Ta = +80℃, 240 hrs Ta = -20℃, 240 hrs Ta = +60℃, 90%RH , 240 hrs -20℃ → +70℃ , 200 Cycles 30 min 30 min Frequency : 10 ~ 55 HZ Amplitude : 1 mm Sweep time : 11 mins Test Period : 6 Cycles for each direction of X, Y, Z 100G , 6ms Direction : ±X , ±Y , ±Z Cycle : 3 times 200pF , 0Ω ±200V 1 time / each terminal Ta: ambient temperature [Criteria] Under the display quality test conditions with normal operation state, there should be no change which may affect practical display function. 13. Indication of Lot Number Label a) Indicated contents of the label Lot number OOO-OOOOOO PW090XS2XX Module number Contents of lot number : 1st~3rd—The OEM product 5th—Production year : 1999⇒9, 2000⇒A, 2001⇒B…….. 6th—Production month : 1, 2, 3,….9, A, B, C 7th~8th—Production size : 9.0”⇒90 9th~10th—Serial numbers : 01~99 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:22 PW090XS2 14. Block Diagram LCD Panel V Driver (Gate) H Driver (Source) 30 PIN Input Inverter Back-light The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:23 PW090XS2 15. Packing The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:24 PW090XS2 Revision History Rev. Issued Date Revised Contents 1.0 Jul. 28 , 2004 NEW 1.1 Oct. 08 , 2004 Modify Page 22 : Reliability test condition High Temperature Storage Test (From +70℃ to +80℃) Low Temperature Storage Test (From -10℃ to -30℃) High Temperature Operation Test (From +60℃ to +80℃) Low Temperature Operation Test (From 0℃ to -20℃) High Temperature & High Humidity Operation Test (From +50℃, 80%RH to +60℃, 90%RH) Thermal Cycling Test (From -25℃ → +70℃ to -20℃ → +70℃) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:25