Product Data Sheet 3.0 WATT MINIATURE SIP DC/DC CONVERTER HPR2XX FEATURES ! High Isolation Voltage: 750V Continuous Input-to-Output and Channel-to-Channel Extended Temperature Range: -25°C To +85°C ! Single In-line Package (SIP) ! Internal Input and Output Filtering ! High Efficiency: To 84% ! Non-Conductive Case ! Low Cost ! Four Channels Of Isolated Power ! High Output Power Density: > 9. 4 Watts/Inch3 ! The HPR2XX Series is designed for multiple channel applications that require small size and could benefit from a complete onepackage solution. The HPR2XX Series offers four isolated channels of output power in a footprint less than the size of many singular devices. This unregulated series of DC/DC converters provides three watts of total output power. Each isolated channel can supply up to 750mW. frequencies, or "aliasing" in multiple channel applications. The HPR2XX Series uses advanced circuit design and packaging technology to realize superior reliability and performance. With only one switching converter on the board, the HPR2XX eliminates the possibility of separate converters creating beat The HPR2XX Series offers the user low cost without sacrificing reliability. The use of surface mounted devices and manufacturing technologies make it possible to offer premium performance and low cost. The high efficiency of the HPR2XX Series means less internal power dissipation than comparable solutions. With reduced heat to dissipate, the HPR2XX Series can operate at higher temperatures with no degradation in reliablility. In addition, the high efficiency of the HPR2XX Series provides greater than 9 watts/inch3 output power density. MECHANICAL PIN CONNECTIONS 2.210+.010 (56.13) TOP VIEW 0.340+.010 (8.64) 1. -VOUT1 5.-VOUT2 9. +VIN 2. COM 1 6. COM2 10.-VIN 15. COM3 3 +VOUT1 7.+VOUT2 14. -VOUT3 18. -VOUT4 19. COM 4 16. +VOUT3 20. +VOUT4 0.340+.010 (8.64) FRONT VIEW RIGHT SIDE VIEW 0.400+.010 (10.16) 0.140+.020 (0.25) 0.030+.010 (0.76) 0.010+.002 (0.25) 0.020+.002 (0.51) 0.155+.015 (3.94) 0.050+.015 (1.27) All dimensions are in inches (millimeters). GRID: 0.100 inches (2.54 millimeters) PIN PLACEMENT TOLERANCE: ± 0.015" Marked with: specific model ordered, date code, and job code. BOTTOM VIEW 1 2 3 5 6 7 9 10 14 15 16 18 19 20 Internet: http://www.cdpowerelectronics.com Power Electronics Division, United States 3400 E Britannia Drive, Tucson, Arizona 85706 Phone: 800.547.2537 Fax: 520.770.9369 HPR2XX REV D 4/99 Power Electronics Division, Europe C&D Technologies (Power Electronics) Ltd. 132 Shannon Industrial Estate, Shannon, Co. Clare, Ireland Tel: +353.61.474.133 Fax:+353.61.474.141 Page 1 ELECTRICAL SPECIFICATIONS Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. NOMINAL INPUT VOLTAGE MODEL (VDC) RATED OUTPUT VOLTAGE RATED OUTPUT CURRENT (VDC) (mA) INPUT CURRENT NO LOAD RATED LOAD (mA) REFLECTED RIPPLE CURRENT (mA) EFFICIENCY (mAp-p) (%) HPR203 HPR204 HPR205 5 5 5 ±5.2 ±12 ±15 ±73 ±30 ±25 70 75 75 820 750 750 35 35 35 74 80 80 HPR210 HPR211 12 12 ±12 ±15 ±30 ±25 30 30 305 300 15 15 82 84 HPR216 HPR217 15 15 ±12 ±15 ±30 ±25 20 20 240 240 15 20 83 84 HPR221 HPR223 24 24 ±5.0 ±15 ±75 ±25 20 20 170 155 20 20 74 81 MIN TYP MAX UNITS 4.5 10.8 13.5 21.6 5 12 15 24 5.5 13.2 16.5 26.4 1 VDC VDC VDC VDC V/µsec Amps Note: Other input to output voltage options may be available. Please consult factory. COMMON SPECIFICATIONS Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. PARAMETER CONDITIONS INPUT Voltage Range Voltage Rise Time In Rush Current ISOLATION Rated Voltage Test Voltage Resistance Capacitance Leakage Current OUTPUT Total Rated Power Rated Power Each Channel Voltage Setpoint Accuracy Ripple & Noise Voltage At Startup Input to Output, Channel to Channel 60 Hz, 10 seconds 750 750 10 30 4 VISO= 240VAC, 60Hz 3 750 Rated Load, Nominal VIN BW = DC to 10MHz BW =10Hz to 2MHz IL=1mA, VOUT = 5V IL=1mA, VOUT = 12V IL=1mA, VOUT = 15V GENERAL Switching Frequency Package Weight Frequency Change MTTF per MIL-HDBK-217, Rev. E Ground Benign Fixed Ground Naval Sheltered Airborne Uninhabited Fighter Internal Power Dissipation............................................................................1.2W Short Circuit Protection.......................................................................< 1 second Lead Temperature (soldering, 10 seconds max)......................................+300°C Page 2 %/%VIN % % 300 7 5 20 kHz g % % 1.8 450 270 45 MHr kHr kHr kHr 8 17 20 Rated Load to 1mA Load High Line to Low Line Circuit Stress Method TA = +25°C TA = +35°C TA = +35°C TA = +35°C ABSOLUTE MAXIMUM RATINGS 1 10 3 ±5 High Line to Low Line Rated Load to 1mA Load Rated Load to 1mA Load TEMPERATURE Specification Operation Storage .05 W mW % mVp-p mVrms VDC VDC VDC %/Deg C 40 7 Temperature Coefficent REGULATION Line Regulation Load Regulation (5V out only) Load Regulation (All other Models) VDC Vpk GΩ pF µArms -25 -40 -40 +25 +85 +100 +110 °C °C °C ORDERING INFORMATION HPR 2XX /H Device Family HPR Indicates DC/DC Converter Model Number Selected From Table Above Screening Option HPR2XX REVD 4/99 TYPICAL PERFORMANCE CURVES Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. FREQUENCY vx VIN FREQUENCY vs Pout CROSS REGULATION HPR205 Channels 2-4: +25mA Load 420 31.0 375 350 325 300 4.5 4.75 5.0 390 Nominal Line 360 330 29.0 0 .75 1.5 2.25 0 3.0 6 12 18 Pout (Watts) Input Channel 1 (mA) LOAD REGULATION LOAD REGULATION LOAD REGULATION (12 Vout Models) 16.00 6.2 13.4 15.75 5.4 VOUT (VDC) 14.0 5.8 12.8 15.00 11.6 20 40 60 80 0 15.50 15.25 12.2 5.0 26 (15 Vout Models) 6.6 0 Channel 2-4 Vin (VDC) VOUT (VDC) VOUT (VDC) 30.0 Channel 1 300 5.25 5.5 30.5 29.5 Low Line (5 Vout Models) 8 16 24 32 -0 6.25 12.50 18.75 25 Iout (mA sum of all Outputs) Iout (mA sum of all Outputs) Iout (mA sum of all Outputs) REFLECTED RIPPLE CURRENT vs. Pout EFFICIENCY vs OUTPUT POWER LINE REGULATION 37.5 25.0 12.5 +15Vout +12Vout +5Vout 67.5 45.0 22.5 0 0 0 0.8 1.7 2.6 Pout (Watts) 3.4 12 Change from Nom Vout (%) 90.0 50.0 Efficiency (Pout/Pin) Reflected Ripple Current (mA p-p) +VOUT (VDC) High Line Frequency (kHZ) Frequency (kHZ) 400 6 0 -6 -12 0 .85 1.7 2.6 Pout (Watts) 3.5 -10 -5 0 5 10 Pout (Watts) The information provided herein is believed to be reliable; however, C&D TECHNOLOGIES assumes no responsibility for inaccuracies or omissions. C&D TECHNOLOGIES assumes no responsibility for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. C&D TECHNOLOGIES does not authorize or warrant any C&D TECHNOLOGIES product for use in life support devices/systems or in aircraft control applications. HPR2XX REV D 4/99 Page 3