8 PIN DIP 400 V BREAKDOWN VOLTAGE, TRANSFER TYPE 2-CH OPTICAL COUPLED MOSFET PS7142-1C PS7142L-1C FEATURES DESCRIPTION • 2 CHANNEL TYPE: 1a + 1b output PS7142-1C and PS7142L-1C are transfer type solid state relays containing normally open (N.O.) contacts and normally closed contacts on the output side. • LOW LED OPERATING CURRENT: IF = 2 mA They are suitable for analog signal control because of their low offset and high linearity. • DESIGNED FOR AC/DC SWITCHING LINE CHANGER • SMALL PACKAGE: 8 Pin DIP • LOW OFFSET VOLTAGE APPLICATIONS • SURFACE MOUNT TYPE LEAD AVAILABLE: PS7142L-1C • EXCHANGE EQUIPMENT • MEASUREMENT EQUIPMENT • FA/OA EQUIPMENT ELECTRICAL CHARACTERISTICS (TA = 25°C) PART NUMBER MOSFET Diode SYMBOLS PS7142-1C, PS7142L-1C PARAMETERS UNITS VF Forward Voltage, IF = 10 mA V IR Reverse Current, VR = 5 V µA Off-State Leakage Current, N.O.: IF = 0 mA, VD = 400 V µA ILoff TYP MAX 1.2 1.4 5.0 0.03 1.0 N.C.: IF = 10 mA, VD = 400 V COUT Output Capacitance, N.O.: VD = 0 V, f = 1 MHz N.C.: IF = 10 mA, VD = 0 V, f = 1 MHz Coupled MIN pF/ch 140 pF/ch 430 IFon LED On-state Current, N.O.: IL = 200 mA mA 2.0 IFoff LED Off-state Current, N.C.: IL = 200 mA mA 2.0 Ron1 On-State Resistance, N.O.: IF = 10 mA, IL = 10 mA N.C.: IF = 0 mA, IL = 10 mA N.O.: IF = 10 mA, IL = 200 mA, t ≤10 ms N.C.: IF = 0 mA, IL = 200 mA, t ≤10 ms Ron2 ton (N.O.) Ω Turn-On Time1, IF = 10 mA, VO = 5 V, PW ≥ 10 ms ms ton (N.C.) Turn-Off Time1, IF = 10 mA, VO = 5 V, PW ≥ 10 ms ms Rl-O Isolation Resistance, Vin-out = 1.0 kVDC Ω Cl-O Isolation Capacitance, V = 0 V, f = 1 MHz toff (N.O.) toff (N.C.) 8 7 7 7 12 12 10 10 0.3 2.0 0.03 0.2 0.03 0.2 0.6 2.0 109 pF/ch 1.1 Note: 1. Test circuit for Switching Time IF Pulse Input VL PS7142-1C, PS7142L-1C Input 50% 50% Input 0 VO = 5 V Input Monitor VO Monitor Rin RL 90% Output 8 7 6 5 1 2 3 4 0 VO = 5 V 90% Output 10% 10% ton toff toff ton California Eastern Laboratories PS7142-1C, PS7142L-1C ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) SYMBOLS PARAMETERS UNITS RATINGS 5 50 50 RECOMMENDED OPERATING CONDITIONS (TA = 25 °C) MOSFET Diode SYMBOL VR IF PD Reverse Voltage Forward Current (DC) Power Dissipation V mA mW/ch IFP Peak Forward Current2 A 1 VL Break Down Voltage V 400 IL Continuous Load Current mA 200 mA 400 Current3 PARAMETER IF LED Operating Current VF LED Off Voltage UNITS MIN TYP MAX mA 2 V 0 10 ORDERING INFORMATION ILP Pulse Load (AC/DC Connection) PD Power Dissipation mW/ch 375 BV Isolation Voltage4 Vr.m.s. 1500 PS714L2-1C-E3 Embossed Tape, PT Total Power Dissipation mW 850 PS7142L-1C-E4 1000 pcs/reel TA Operating Ambient Temp. °C -40 to +80 Storage Temperature °C -40 to +100 TSTG PART NUMBER PACKAGE PACKING STYLE PS7142-1C 8 Pin DIP Magazine case, 50 pcs PS7142L-1C Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. PW = 100 µs, Duty Cycle = 1% 3. PW = 100 ms, 1 shot. 4. AC voltage for 1 minute at TA = 25 °C, RH = 60% between input and output. TYPICAL PERFORMANCE CURVES (TA = 25 °C) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE 300 Maximum Load Current, IL (mA) Maximum Forward Current, IF (mA) 100 80 60 40 20 0 -25 0 25 50 75 80 250 200 150 100 50 0 -25 100 0 25 75 80 50 Ambient Temperature, TA (°C) Ambient Temperature, TA (°C) FORWARD VOLTAGE vs. AMBIENT TEMPERATURE OUTPUT CAPACITANCE vs. APPLIED VOLTAGE 1.6 100 500 IF = 50 mA 30 mA 20 mA 10 mA 1.2 5 mA 1.0 0.8 -25 1 mA 0 25 50 75 Ambient Temperature, TA (°C) 100 Output Capacitance, Cout (pF) Forward Voltage, VF (V) f = 1 MHz 1.4 20 0.5 375 250 N.C. N.O. 125 0 20 40 60 80 Applied Voltage, VD (V) 100 120 PS7142-1C, PS7142L-1C TYPICAL PERFORMANCE CURVES (TA = 25 °C) OFF-STATE LEAKAGE CURRENT vs. APPLIED VOLTAGE LOAD CURRENT vs. LOAD VOLTAGE 200 IF = 0 mA (N.O.) IF = 10 mA (N.C.) IF = 0 mA 10-6 Load Current, IL (mA) Off-state Leakage Current, ILoff (A) 10 -5 TA = 80°C N.O., N.C. 10-7 10-8 100 0 -2.0 -4.0 2.0 4.0 -100 TA = 25°C N.O., N.C. -200 10-9 0 100 200 300 400 500 Load Voltage, VL (V) Applied Voltage, VD (V) TURN-OFF TIME vs. FORWARD CURRENT TURN-ON TIME vs. FORWARD CURRENT 3.0 1.2 VO = 5 V VO = 5 V 2.5 Turn-off Time, ton (ms) Turn-on Time, ton (ms) 1.0 0.8 N.O. 0.6 0.4 2.0 N.C. 1.5 1.0 0.5 0.2 N.C. N.O. 0 0 0 5 10 15 20 25 0 30 Forward Current, IF (mA) 15 20 25 30 NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE 3.0 3.0 Normalized to 1.0 at TA = 25°C IF = 10 mA VO = 5 V 2.5 Normalized Turn-off Time, TOoff Normalized Turn-on Time, Ton 10 Forward Current, IF (mA) NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE 2.0 N.O. 1.5 N.C. 1.0 0.5 0.0 -25 5 0 25 50 75 Ambient Temperature, TA (°C) 100 Normalized to 1.0 at TA = 25°C. IF = 10 mA VO = 5 V 2.5 2.0 N.C. 1.5 N.O. 1.0 0.5 0.0 -25 0 25 50 75 Ambient Temperature, TA (°C) 100 PS7142-1C, PS7142L-1C TYPICAL PERFORMANCE CURVES (TA = 25 °C) 3.0 ON-STATE RESISTANCE (N.O.) DISTRIBUTION 30 Normalized to 1.0 at TA = 25°C, IF = 10 mA, IL = 10 mA (N.O.) IF = 0 mA, IL = 10 mA (N.C.) 2.5 2.0 N.O. 1.5 N.C. 1.0 20 15 10 5 0.5 0.0 -25 0 0 25 50 75 100 8 ON-STATE RESISTANCE (N.C.) DISTRIBUTION TURN-ON TIME (N.O.) DISTRIBUTION 30 30 n = 50 pcs, IF = 0 mA, IL = 10 mA 25 20 15 10 n = 50 pcs, IF = 10 mA, VO = 5 V 25 Number (pcs) Number (pcs) 10 On-State Resistance, RON (Ω) Ambient Temperature, TA (°C) 20 15 10 5 5 0 0 6 0.3 8 On-State Resistance, RON (Ω) TURN-OFF TIME (N.O.) DISTRIBUTION 30 n = 50 pcs, IF = 10 mA, VO = 5 V 25 15 10 5 n = 50 pcs, IF = 10 mA, VO = 5 V 25 Number (pcs) 20 0.4 Turn-on Time, ton (ms) TURN-ON TIME (N.C.) DISTRIBUTION 30 Number (pcs) n = 50 pcs, IF = 10 mA, IL = 10 mA 25 Number (pcs) Normalized On-State Resistance, RON ( Ω) NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE 20 15 10 5 0 0 0.02 0.04 Turn-on Time, toff (ms) 0.03 0.05 Turn-off Time, toff (ms) PS7142-1C, PS7142L-1C TYPICAL PERFORMANCE CURVES (TA = 25 °C) TURN-OFF TIME (N.C.) DISTRIBUTION 30 n = 50 pcs, IF = 10 mA, VO = 5 V Number (pcs) 25 20 15 10 5 0 0.6 0.8 Turn-off Time, toff (ms) OUTLINE DIMENSIONS (Units in mm) PS7142L-1C PS7142-1C (TOP VIEW) (TOP VIEW) 8 7 6 5 1 2 3 4 3.5±0.3 7.62 6.5±0.5 4.15±0.3 9.25±0.5 8 7 6 5 1 2 3 6.5±0.5 4 3.5±0.3 9.25±0.5 0.10 1.34±0.1 2.54 +0.10 -0.05 0.9±0.25 9.60±0.4 3.3±0.3 1.34 ± 0.10 2.54 0.25 M 0.50 ± 0.10 0 to 15 ˚ 1. LED Anode 2. LED Cathode 3. LED Anode 4. LED Cathode 5. MOSFET (N.O.) 6. MOSFET (N.O.) 7. MOSFET (N.C.) 8. MOSFET (N.C.) 1. LED Anode 2. LED Cathode 3. LED Anode 4. LED Cathode 5. MOSFET (N.O.) 6. MOSFET (N.O.) 7. MOSFET (N.C.) 8. MOSFET (N.C.) PS7142-1C, PS7142L-1C TAPING SPECIFICATIONS (Units in mm) 2.0 ± 0.1 1.55 ± 0.1 4.0 ± 0.1 1.75 ± 0.1 OUTLINE AND DIMENSIONS (TAPE) 10.3 ± 0.1 16.0 ± 0.3 7.5 ± 0.1 4.3 ± 0.2 0.3 1.55 ± 0.1 10.4 ± 0.1 12.0 ± 0.1 TAPING DIRECTION PS7142L-1C-E3 PS7142L-1C-E4 OUTLINE AND DIMENSIONS (REEL) 1.5 2.0 ± 0.5 R1.0 φ80.0 ± 5.0 φ330 φ13.0 ± 0.5 φ21.0 ± 0.8 +2.0 16.4 -0.0 Packing : 1000 pcs/reel PS7142-1C, PS7142L-1C RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering • Peak reflow temperature • Time of temperature higher than 210 °C • Number of reflows • Flux 235 °C or below (package surface temperature) 30 seconds or less Two Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) Package Surface Temperature T (˚C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 235 ˚C (peak temperature) 210 ˚C to 30 s 100 to 160 ˚C 60 to 120 s (preheating) Time (s) (2) Dip soldering • Temperature • Time • Number of times • Flux 260 °C or below (molten solder temperature) 10 seconds or less One Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (3) Cautions • Fluxes Avoid removing the residual flux with freon-based cleaning solvent. EXCLUSIVE NORTH AMERICAN AGENT FOR RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) • Internet: http://WWW.CEL.COM 07/27/2001 DATA SUBJECT TO CHANGE WITHOUT NOTICE