CEL PS7241-1A-A

Solid State Relay
OCMOS FET
PS7241-1A
4-PIN SOP 400 V BREAK DOWN VOLTAGE
1-ch Optical Coupled MOS FET
DESCRIPTION
The PS7241-1A is a solid state relay containing GaAs LEDs on the light emitting side (input side) and normally
open (N.O.) contact MOS FETs on the output side.
It is suitable for analog signal control because of its low offset and high linearity.
FEATURES
• Small and thin package (4-pin SOP, Height = 2.1 mm)
• 1 channel type (1 a output)
• Low LED operating current (IF = 2 mA)
• Designed for AC/DC switching line changer
• Low offset voltage
• Ordering number of taping product: PS7241-1A-E3, E4, E5, F3, F4
• UL approved: File No. E72422 (S)
• BSI approved: No. 8241/8242
• CSA approved: No. CA 101391
• VDE approved: No. 121302 ÜG
APPLICATIONS
• Laptop PC, PDA
• Modem card
• Telephone, FAX
• Measurement equipment
Document No. PN10301EJ01V1DS (1st edition)
(Previous No. P13438EJ5V0DS00)
Date Published February 2003 CP(K)
The mark  shows major revised points.
PS7241-1A
PACKAGE DIMENSIONS
in millimeters
4.0±0.5
TOP VIEW
4
3
1. LED Anode
2. LED Cathode
3. MOS FET
4. MOS FET
1
2
0.05+0.08
–0.05
2.05+0.08
–0.05
0.15+0.10
–0.05
7.0±0.3
4.4
2
0.5±0.3
2.54
0.40+0.10
–0.05
0.25 M
Data Sheet PN10301EJ01V1DS
PS7241-1A
ORDERING INFORMATION (Solder Contains Lead)
Part Number
PS7241-1A
Package
Packing Style
4-pin SOP
Magazine case 100 pcs
PS7241-1A-E3
Application Part Number
*1
PS7241-1A
Embossed Tape 900 pcs/reel
PS7241-1A-E4
PS7241-1A-E5
Embossed Tape 1 000 pcs/reel
PS7241-1A-F3
Embossed Tape 3 500 pcs/reel
PS7241-1A-F4
*1 For the application of the Safety Standard, following part number should be used.
ORDERING INFORMATION (Pb-Free)
Part Number
PS7241-1A-A
Package
Packing Style
4-pin SOP
Magazine case 100 pcs
PS7241-1A-E3-A
Application Part Number
*1
PS7241-1A
Embossed Tape 900 pcs/reel
PS7241-1A-E4-A
PS7241-1A-E5-A
Embossed Tape 1 000 pcs/reel
PS7241-1A-F3-A
Embossed Tape 3 500 pcs/reel
PS7241-1A-F4-A
*1 For the application of the Safety Standard, following part number should be used.
ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise specified)
Parameter
Symbol
Ratings
Unit
Forward Current (DC)
IF
50
mA
Reverse Voltage
VR
5.0
V
PD
50
mW
IFP
1
A
Break Down Voltage
VL
400
V
Continuous Load Current
IL
120
mA
Pulse Load Current
(AC/DC Connection)
ILP
240
mA
Power Dissipation
PD
300
mW
BV
1 500
Vr.m.s.
Total Power Dissipation
PT
350
mW
Operating Ambient Temperature
TA
−40 to +85
°C
Storage Temperature
Tstg
−40 to +100
°C
Diode
Power Dissipation
Peak Forward Current
MOS FET
*1
*2
Isolation Voltage
*3
*1 PW = 100 µs, Duty Cycle = 1 %
*2 PW = 100 ms, 1 shot
*3 AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output
Data Sheet PN10301EJ01V1DS
3
PS7241-1A
RECOMMENDED OPERATING CONDITIONS (TA = 25 °C)
Parameter
Symbol
MIN.
TYP.
MAX.
Unit
LED Operating Current
IF
2
10
20
mA
LED Off Voltage
VF
0
0.5
V
ELECTRICAL CHARACTERISTICS (TA = 25 °C)
Parameter
Diode
MOS FET
Symbol
Conditions
Forward Voltage
VF
IF = 10 mA
Reverse Current
IR
VR = 5 V
Off-state Leakage
ILoff
VD = 400 V
Output Capacitance
Cout
VD = 0 V, f = 1 MHz
LED On-state Current
IFon
IL = 120 mA
On-state Resistance
Ron1
IF = 10 mA, IL = 10 mA
MIN.
TYP.
MAX.
Unit
1.2
1.4
V
5.0
µA
1.0
µA
0.03
Current
Coupled
54
pF
2.0
mA
18
30
Ω
Ron2
IF = 10 mA, IL = 120 mA, t ≤ 10 ms
15
25
*1
ton
IF = 10 mA, VO = 5 V, RL = 500 Ω,
0.5
2.0
*1
toff
PW ≥ 10 ms
0.07
0.2
Turn-on Time
Turn-off Time
Isolation Resistance
RI-O
VI-O = 1.0 kVDC
Isolation Capacitance
CI-O
V = 0 V, f = 1 MHz
10
ms
Ω
9
0.5
pF
*1 Test Circuit for Switching Time
IF
Pulse Input
VL
50 %
Input
0
VO = 5 V
Input monitor
90 %
VO monitor
Output
Rin
RL
10 %
ton
4
Data Sheet PN10301EJ01V1DS
toff
PS7241-1A
TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise specified)
MAXIMUM FORWARD CURRENT vs.
AMBIENT TEMPERATURE
MAXIMUM LOAD CURRENT vs.
AMBIENT TEMPERATURE
300
Maximum Load Current IL (mA)
Maximum Forward Current IF (mA)
100
80
60
40
20
0
–25
0
25
75 85
50
200
100
0
–25
100
0
25
75 85
50
Ambient Temperature TA (˚C)
Ambient Temperature TA (˚C)
FORWARD VOLTAGE vs.
AMBIENT TEMPERATURE
OUTPUT CAPACITANCE vs.
APPLIED VOLTAGE
1.8
100
200
1.6
1.4
Output Capacitance Cout (pF)
Forward Voltage VF (V)
f = 1 MHz
IF = 50 mA
30 mA
20 mA
10 mA
5 mA
1 mA
1.2
1.0
0.8
–25
0
25
50
75
150
100
50
0
100
20
40
80
100
120
Ambient Temperature TA (˚C)
Applied Voltage VD (V)
OFF-STATE LEAKAGE CURRENT vs.
APPLIED VOLTAGE
LOAD CURRENT vs. LOAD VOLTAGE
10–5
200
IF = 10 mA
TA = 85 ˚C
10–6
Load Current IL (mA)
Off-state Leakage Current ILoff (A)
60
10–7
25 ˚C
10–8
10–9
0
100
200
300
400
100
–4.0
500
–2.0
0
2.0
4.0
–100
–200
Load Voltage VL (V)
Applied Voltage VD (V)
Data Sheet PN10301EJ01V1DS
5
PS7241-1A
NORMALIZED ON-STATE RESISTANCE vs.
AMBIENT TEMPERATURE
ON-STATE RESISTANCE DISTRIBUTION
30
Normalized to 1.0
at TA = 25 ˚C,
IF = 10 mA,
IL = 10 mA
2.5
2.0
1.5
1.0
n = 50 pcs,
IF = 10 mA,
IL = 10 mA
25
Number (pcs)
Normalized On-state Resistance Ron
3.0
20
15
10
5
0.5
0.0
–25
0
25
50
75
0
100
16
18
20
22
On-state Resistance Ron (Ω)
Ambient Temperature TA (˚C)
TURN-OFF TIME vs. FORWARD CURRENT
TURN-ON TIME vs. FORWARD CURRENT
3.0
0.30
VO = 5 V
VO = 5 V
0.25
Turn-off Time toff (ms)
Turn-on Time ton (ms)
2.5
2.0
1.5
1.0
0.20
0.15
0.10
0.05
0.5
0
5
10
15
20
25
0
30
5
Forward Current IF (mA)
20
25
TURN-OFF TIME DISTRIBUTION
15
10
n = 50 pcs,
IF = 10 mA,
VO = 5 V
25
Number (pcs)
Number (pcs)
20
20
15
10
5
5
0.4
0.5
0.6
0.7
0.8
0
0.04
0.06
0.08
0.10
Turn-off Time toff (ms)
Turn-on Time ton (ms)
6
15
30
n = 50 pcs,
IF = 10 mA,
VO = 5 V
25
10
Forward Current IF (mA)
TURN-ON TIME DISTRIBUTION
30
0
24
Data Sheet PN10301EJ01V1DS
0.12
30
PS7241-1A
NORMALIZED TURN-OFF TIME vs.
AMBIENT TEMPERATURE
NORMALIZED TURN-ON TIME vs.
AMBIENT TEMPERATURE
3.0
Normalized to 1.0
at TA = 25 ˚C,
IF = 10 mA,
VO = 5 V
2.5
2.0
1.5
1.0
0.5
0.0
–25
0
25
50
75
100
Normalized Turn-off Time toff
Normalized Turn-on Time ton
3.0
Normalized to 1.0
at TA = 25 ˚C,
IF = 10 mA,
VO = 5 V
2.5
2.0
1.5
1.0
0.5
0.0
–25
0
25
50
75
100
Ambient Temperature TA (˚C)
Ambient Temperature TA (˚C)
Remark The graphs indicate nominal characteristics.
Data Sheet PN10301EJ01V1DS
7
PS7241-1A
TAPING SPECIFICATIONS (in millimeters)
1.55±0.1
2.9 MAX.
12.0±0.2
5.5±0.05
1.5+0.1
–0
7.4±0.1
2.0±0.05
4.0±0.1
1.75±0.1
Outline and Dimensions (Tape)
2.4±0.1
4.6±0.1
0.3
8.0±0.1
Tape Direction
PS7241-1A-E3
PS7241-1A-E4
Outline and Dimensions (Reel)
2.0±0.5
φ 60 +1
–0
R 1.0
φ 180+0
–1.5
2.0±0.5
φ13.0±0.2
φ 21.0±0.8
13.5±1.0
17.5±1.0
Packing: 900 pcs/reel
8
Data Sheet PN10301EJ01V1DS
11.9 to 15.4
Outer edge of
flange
PS7241-1A
1.6±0.1
2.4±0.3
4.4±0.1
5.5±0.1
1.55±0.05
12.0±0.3
2.0±0.1
4.0±0.1
1.75±0.1
Outline and Dimensions (Tape)
0.3±0.05
7.4±0.1
12.0±0.3
Tape Direction
PS7241-1A-E5
Outline and Dimensions (Reel)
2.0
80±1.0
255±2.0
4
13.0±0.5
60
2.0±0.5
2.5
13.5±1.0
Packing: 1 000 pcs/reel
Data Sheet PN10301EJ01V1DS
9
PS7241-1A
1.55±0.1
2.9 MAX.
12.0±0.2
5.5±0.05
1.5+0.1
–0
7.4±0.1
2.0±0.05
4.0±0.1
1.75±0.1
Outline and Dimensions (Tape)
2.4±0.1
4.6±0.1
0.3
8.0±0.1
Tape Direction
PS7241-1A-F4
PS7241-1A-F3
Outline and Dimensions (Reel)
φ 21.0±0.8
φ 100±1.0
R 1.0
φ 13.0±0.2
2.0±0.5
φ13.0±0.2
φ 330±2.0
2.0±0.5
13.5±1.0
17.5±1.0
Packing: 3 500 pcs/reel
10
Data Sheet PN10301EJ01V1DS
11.9 to 15.4
Outer edge of
flange
PS7241-1A
RECOMMENDED SOLDERING CONDITIONS
(1) Infrared reflow soldering
• Peak reflow temperature
260°C or below (package surface temperature)
• Time of peak reflow temperature
10 seconds or less
• Time of temperature higher than 220°C
60 seconds or less
• Time to preheat temperature from 120 to 180°C
120±30 s
• Number of reflows
Three
• Flux
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Package Surface Temperature T (˚C)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
260˚C MAX.
220˚C
to 60 s
180˚C
120˚C
120±30 s
(preheating)
Time (s)
(2) Wave soldering
• Temperature
260°C or below (molten solder temperature)
• Time
10 seconds or less
• Preheating conditions
120°C or below (package surface temperature)
• Number of times
One
• Flux
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
Data Sheet PN10301EJ01V1DS
11
4590 Patrick Henry Drive
Santa Clara, CA 95054-1817
Telephone: (408) 919-2500
Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant
with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous
Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive
2003/11/EC Restriction on Penta and Octa BDE.
CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates
that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are
exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals.
All devices with these suffixes meet the requirements of the RoHS directive.
This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that
go into its products as of the date of disclosure of this information.
Restricted Substance
per RoHS
Concentration Limit per RoHS
(values are not yet fixed)
Concentration contained
in CEL devices
-A
Not Detected
Lead (Pb)
< 1000 PPM
Mercury
< 1000 PPM
Not Detected
Cadmium
< 100 PPM
Not Detected
Hexavalent Chromium
< 1000 PPM
Not Detected
PBB
< 1000 PPM
Not Detected
PBDE
< 1000 PPM
Not Detected
-AZ
(*)
If you should have any additional questions regarding our devices and compliance to environmental
standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance
content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information
provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better
integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate
information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL
suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for
release.
In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to
customer on an annual basis.
See CEL Terms and Conditions for additional clarification of warranties and liability.