CE W005G THRU W10G CHENYI ELECTRONICS SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER Voltage: 50 TO 1000V CURRENT:1.5A FEATURES Ideal for printed circuit board High surge capcability 60A peak High case dielectric strength MECHANICAL DATA . Terminal: Plated leads solderable per MIL-STD 202E, method 208C . Case: UL-94 Class V-0 recognized Flame Retardant Epoxy . Polarity: Polarity symbol marked on body . Mounting position: any MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Single-phase, half-wave, 60HZ, resistive or inductive load rating at 25 , unless otherwise stated, for capacitive load, derate current by 20%) SYMBOL W005G W01G W02G W04G W06G W08G W10G units v v v Maximum Recurrent Peak Reverse Voltage Vrrm 50 100 200 400 600 800 1000 Maximum RMS Voltage Vrms 35 70 140 280 420 560 700 Vdc 50 100 200 400 600 800 1000 Maximum DC blocking Voltage Maximum Average Forward Rectified current at Ta=50 If(av) 1.5 A Ifsm 50 A Vf 1.0 V 10.0 A Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage at forward current 1.5A Maximum DC Reverse Voltage Ta=25 at rated DC blocking voltage Ta=125 Ir 1.0 mA Tyoical Junction Capacitance(Note 1) Cj 24 pF Operating Temperature Range Tj -55 to +125 Tstg -55 to +150 Storage and operation Junction Temperature Note: 1.Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc Copyright @ 2000 SHANGHAI CHENYI ELECTRONICS CO.,LTD Page 1 of 2 CE W005G THRU W10G CHENYI ELECTRONICS SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER Voltage: 50 TO 1000V CURRENT:1.5A RATINGS AND CHARACTERISTIC CURVES W005G THRU W10G FIG.1-DERATING CURVE FIG.2-MAXIMUM NON-REPETITIVE PEAK OUTPUT RECTIFIED CURRENT FIG.3-TYPICAL FORWARD CHARACTERISTICS PER LEG FIG.5-TYPICAL JUNCTION CAPACITANCE FORWARD SURGE CURRENT PER LEG FIG.4-TYPICAL REVERSE CHARACTERISTICS PER LEG FIG.6-TYPICAL TRANSIENT THERMAL IMPEDANCE PER LEG Copyright @ 2000 SHANGHAI CHENYI ELECTRONICS CO.,LTD Page 2 of 2