ITC117P Integrated Telecom Circuits Relay Load Voltage Relay Load Current Relay Max RON Bridge Rectifier Reverse Voltage Darlington Collector Current Darlington Current Gain ITC117P 350 120 15 Units V mA Ω 100 120 10,000 V mA - Features • Small 16 Pin SOIC Package (PCMCIA Compatible) • Board Space and Cost Savings • 2mW Hookswitch Drive Power (Logic Compatible) • No Moving Parts • 3750VRMS Input/Output Isolation • FCC Compatible Part 68 • Full-Wave Bridge Rectifier • Darlington Transistor for Electronic Inductor “Dry” Circuits • Full Wave Current Detector for Ring Signal or Loop Current Detect • JEDEC Standard Pin Out Applications • Data/Fax Modem • Voice Mail Systems • Telephone Sets • Computer Telephony Integration • Set Top Box Modems Description The Integrated Telecom Circuit combines a 1-Form-A solid state relay, bridge rectifier, Darlington transistor and optocoupler into one 16 pin SOIC package, consolidating designs and reducing component count in telecom applications. The ITC117’s optocoupler provides for full wave detection of ring signals. Approvals • UL Recognized: File Number E76270 • CSA Certified: File Number LR 43639-12 • BSI Certified: • BS EN 60950:1992 (BS7002:1992) Certificate #: 7969 • BS EN 41003:1993 Certificate #: 7969 Ordering Information Part # ITC117P ITC117P Description 16 Pin SOIC (50/Tube) 16 Pin SOIC (1000/Reel) Pin Configuration ITC117P (N/C) – LED - Form A Relay – LED - Form A Relay (N/C) (N/C) (N/C) Collector - Phototransistor Emitter - Phototransistor 1 16 2 15 PV 3 4 13 5 12 6 11 7 10 ** 8 ** DS-ITC117P-Rxx www.clare.com 14 9 Output Form A Output Form A/Bridge Input –/+ Darlington Base Darlington Emitter Bridge Output +/Darlington Collector Bridge Output – LED - Phototransistor –/+ LED - Phototransistor +/– Denotes full-wave detection 1 ITC117P Absolute Maximum Ratings (@ 25˚ C) Parameter Total Package Dissipation Isolation Voltage Input to Output Operational Temperature Storage Temperature Soldering Temperature (10 Seconds Max.) 1 Min 3750 -40 -40 - Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Typ Max Units 11 W - VRMS +85 °C +125 °C +220 °C Above 25˚ derate linerity 8.33mw/˚C Total Power Dissipation (PD): PD=PHOOKSWITCH + PBRIDGE + PDARLINGTON + PLED PD=(RDS(on)) (I2L) + 2(VF)(IL) + (VCE)(IL) + (VLED)(IF) WHERE: RDS(on) = Maximum realy on resistance IL = Maximum loop current VF = Maximum diode forward voltage VCE = Maximum voltage collector to emitter VLED = Maximum LED forward voltage IF = Maximum LED current Electrical Characteristics Parameter Relay Portion (Pins 15,16) Output Characteristics @ 25°C Load Voltage, DC or Peak AC Load Current (Continuous) On-Resistance Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Relay Portion (Pins 2,3) Input Characteristics @ 25°C Input Control Current Input Voltage Drop Reverse Input Voltage Reverse Input Current Detector Portion (Pins 7,8) Output Characteristics @ 25°C Phototransistor Blocking Voltage Phototransistor Dark Current Saturation Voltage Current Transfer Ratio Detector Portion (Pins 9,10) Input Characteristics @ 25°C Input Control Current Input Voltage Drop Input Current (Detector must be off) 2 Conditions Symbol Min Typ Max Units IL=120mA VL=350, TJ=25˚C VL IL RON ILEAK - - 350 120 15 1 V mA Ω µA IF=5mA, VL=10V IF=5mA, VL=10V 50V, f=1MHz TON TOFF COUT - 25 3 3 - ms ms pF IL=120mA IF=5mA VR=5V IF VF VR IR 5 0.9 - 1.2 - 50 1.4 5 10 mA V V µA IC=10µA VCE=5V, IF=0mA IC=2mA, IF=16mA IF=6mA, VCE=0.5V BVCEO ICEO VSAT CTR 20 33 50 50 0.3 400 500 0.5 - V A V % IC=2mA, VCE=0.5V IF=5mA IC=1µA, VCE=5V IF VF IF 6 0.9 5 2 1.2 25 100 1.4 - mA V µA www.clare.com Rev. X ITC117P Electrical Characteristics Parameter Bridge Rectifier Electrical Ratings @ 25°C Reverse Voltage Forward Drop Voltage Reverse Leakage Current Forward Current (Continuous) Forward Current (Peak) Darlington Electrical Ratings @ 25°C Collector-Emitter Voltage Collector-Current Continuous Power Dissipation @ 25˚C Off-State Collector Emitter Leakage Current DC Current Gain Saturation Voltage Total Harmonic Distortion Zener Characteristics @ 25°C Zener Voltage (Between pins 4+5 and 6+5) Zener Voltage (Between pins 12+11) Input to Output Capacitance Input to Output Isolation Rev. X Conditions Symbol Min Typ Max Units IFD=120mA TJ=25˚C, VR=100V TJ=85˚C VRD VFD IRD t=10mS IFD IFD - - 100 1.5 10 50 140 0.5 V V µA µA mA A Ic=10mA DC, IB=0 VC=3.5V - VCEO IC Pd 40 - - 120 500 V mA mW VCE=10V; IB=0mA IC =120mA, VCE =10VDC IC =120mA fo=300Hz @ -10dBm IC=40mA ICEX hFE 10,000 - 1 - µA VCE(SAT) - - - 1.5 -80 V dB IZT=20mA Vz - - - V IZT=20mA Vz - - - V - CI/O VI/O 3750 3 - - pF VRMS www.clare.com 3 ITC117P PERFORMANCE DATA* ITC117P Typical On-Resistance Distribution (N=50 Ambient Temperature = 25°C) (Load Current = 120mADC) Device Count (N) Device Count (N) 30 25 20 15 10 35 35 30 30 25 20 15 10 5 5 0 0 1.17 1.19 1.21 1.23 8.75 1.25 9.25 9.75 10.25 15 10 0 10.75 365 20 10 5 Device Count (N) 25 20 Device Count (N) 25 20 15 15 10 5 0.54 0.66 0.78 0.90 1.02 0.18 0.30 0.42 LED Current (mA) 0.54 0.66 0.78 0.88 5 100 IF = 5mA 75 50 25 0.14 0.18 0.22 0.26 -40 0.30 0 ITC117P Typical Blocking Voltage vs. Temperature 415 3.0 410 2.5 Turn-On (ms) 405 400 395 390 25 50 85 -40 60 80 100 20 40 60 80 100 0.25 5mA 2.0 10mA 1.5 20mA 1.0 0.20 0.15 0.10 0 40 0 0.30 0.05 20 -20 ITC117P Typical Turn-Off vs. Temperature (Load Current = 120mA) 0 Temperature (°C) 2.98 ITC117P Typical Turn-On vs. Temperature (Load Current = 120mADC) 380 0 2.63 Temperature (°C) 0.5 -20 2.28 0.10 0.09 0.08 0.07 0.06 0.05 0.04 0.03 0.02 0.01 0 385 -40 1.93 Ambient Temperature (°C) Turn-Off (ms) Turn-Off (ms) 0.10 1.58 ITC117P Typical Leakage vs. Temperature (Measured across Pins 15 & 16) 0 0 0.06 1.23 Turn-On (ms) Leakage (µA) 10 425 5 ITC117P Load Current vs. Ambient Temperature Percent of Maximum Load Rating (Typical) (%) 15 415 10 0.90 25 20 405 15 LED Current (mA) ITC117P Typical Turn-Off Time (N=50 Ambient Temperature = 25°C) (Load Current = 120mADC; IF = 2mADC) 395 0 0 0.42 385 ITC117P Typical Turn-On Time (N=50 Ambient Temperature = 25°C) (Load Current = 120mADC; IF = 2mADC) 25 0.30 375 Blocking Voltage (V) ITC117P Typical IF for Switch Dropout (N=50 Ambient Temperature = 25°C) (Load Current = 120mADC) 0 Device Count (N) 20 On-Resistance (Ω) ITC117P Typical IF for Switch Operation (N=50 Ambient Temperature = 25°C) (Load Current = 120mADC) Blocking Voltage (VRMS) 25 5 LED Forward Voltage Drop (V) Device Count (N) ITC117P Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25°C) Device Count (N) 35 ITC117P Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25°C) IF = 5mADC -40 -20 0 20 40 60 Temperature (°C) 80 100 5mA -40 -20 0 20 40 60 80 100 Temperature (°C) The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com Rev. X ITC117P PERFORMANCE DATA* ITC117P Typical Turn-On vs. LED Forward Current (Load Current = 120mADC) LED Forward Voltage Drop (V) 1.8 Turn-On (ms) 1.6 1.4 50mA 30mA 20mA 10mA 5mA 1.2 1.0 0.8 -40 -20 0 20 40 60 80 100 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0.18 0.16 0.14 0.12 0.10 0.08 0.06 0 120 5 10 15 20 25 30 35 40 45 0.04 50 0 1.6 1.4 1.4 30 20 10 LED Current (mA) 1.8 1.6 LED Current (mA) 1.8 50 40 1.2 1.0 0.8 0.6 0.4 0 20 40 60 80 0 0 -50 -100 60 80 -1.0 -0.5 0 0.5 -40 100 1.0 1.5 0.6 0.4 0 10µs 100µs 1ms 10ms 100ms 2.0 1.00 0.95 0.90 0.85 0.80 0.75 0.70 ITC117P Single Transistor Typical Normalized CTR vs. Temperature (VCE = 0.5V) 9 1.0 6 5 4 3 2 0.5 1 0 0 2 4 6 8 10 12 IF (mA) 14 16 18 20 VIN (Volts) Normalized CTR (%) 7 1.5 -40 -20 0 20 40 100 Operating Area ITC117P V-I Characteristics for Test Circuit 4.0 2.0 80 Temperature (°C) 10 2.5 60 25 30 35 40 45 50 55 60 65 70 75 80 85 10s 100s 8 3.0 40 0.50 1s 4.5 3.5 20 0.65 0.60 0.55 Time ITC117P Single Transistor Typical Normalized CTR vs. Forward Current (VCE = 0.5V) 0 ITC117P Package Power Derating 0.8 Load Voltage (V) 0 -20 Temperature (°C) 0.2 -200 -2.0 -1.5 Normalized CTR (%) 40 ITC117P Energy Rating Curve -150 50 0.4 Power Dissipation (Watts) 50 45 0.6 1.2 Load Current (A) Load Current (mA) 20 1.0 100 40 0.8 Temperature (°C) 150 35 0 -20 Temperature (°C) 200 30 0.2 -40 ITC117P Typical Load Current vs. Load Voltage (Ambient Temperature = 25°C) IF = 5mADC 25 1.0 0 100 20 1.2 0.2 0 15 ITC117P Typical IF for Switch Dropout vs. Temperature (Load Current = 120mADC) 60 -20 10 LED Forward Current (mA) ITC117P Typical IF for Switch Operation vs. Temperature (Load Current = 120mADC) ITC117P Typical On-Resistance vs. Temperature (Load Current = 120mADC; IF = 5mADC) -40 5 LED Forward Current (mA) Temperature (°C) On-Resistance (Ω) ITC117P Typical Turn-Off vs. LED Forward Current (Load Current = 120mADC) Turn-Off (ms) ITC117P Typical LED Forward Voltage Drop vs. Temperature 60 1mA 2mA 5mA 10mA 15mA 20mA 80 100 120 Temperature (°C) 8 7 6 5 4 20 40 60 80 100 120 IOUT (mA) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. X www.clare.com 5 ITC117P PERFORMANCE DATA* 2.5 16 12 Normalized CTR (%) 14 10 12 IC (mA) 6 4 10 8 6 4 2 0 2 4 6 8 10 12 14 16 18 0 20 1.5 1.0 0.5 0 0 2 4 6 8 ITC117P Darlington Transistor Typical Normalized CTR vs. Temperature (VCE = 0.8V) 3.0 5mA 1.5 10mA 1.0 15mA 0.5 20mA 0 20 40 16 18 0 20 2 4 6 8 60 Temperature (°C) 80 100 10 12 14 16 20 18 IF (mA) ITC117P Typical Transfer Characteristics of Darlington Transistor 120 24 10mA 20 16 5mA 12 8 2mA 1mA 4 0 0 14 28 Collector Current (mA) 2mA 2.0 -20 12 ITC117P Typical Transfer Characteristics of Single Transistor Detector 1mA 2.5 -40 10 IF (mA) IF (mA) Normalized CTR (%) 2.0 2 0 1 2 3 4 5 6 7 8 Collector Emitter Voltage 9 10 Collector Current (mA) IC (mA) 8 0 ITC117P Darlington Transistor Typical Normalized CTR vs. Forward Current (VCE = 0.8V) ITC117P Darlington Transistor Typical Collector Current vs. Forward Current (VCE = 0.5V) ITC117P Single Transistor Typical Collector Current vs. Forward Current (VCE = 0.5V) Ib = 10µA 100 80 Ib = 8µA 60 Ib = 6µA 40 Ib = 4µA 20 Ib = 2µA 0 2 4 6 8 10 Collector Emitter Voltage *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 6 www.clare.com Rev. X ITC117P Mechanical Dimensions 16 Pin SOIC (“P” Suffix) 1.981 TYP. (.078) 2.108 MAX. (.083) 1.270 TYP. (.050) 7.493 ± .051 (.295 ± .002) 1.016 (.040) PC Board Pattern (Top View) 10.160 ± .051 (.400 ± .002) 7.493 ± .127 (.295 ± .005) 1.270 (.050) 10.363 ± .127 (.408 ± .005) 9.728 ± .051 (.383 ± .002) .254 (.010) 1.193 (.047) .406 TYP. (.016) 8.890 TYP. (.350) .787 (.031) Tape and Reel Packaging for 16 Pin SOIC Package 330.2 DIA. (13.00) 6.731 MAX. (.265) Top Cover Tape Thickness .102 MAX. (.004) 1.753 ± .102 (.069 ± .004) .406 MAX. (.016) 2.007 ± .102 1.498 ± .102 3.987 ± .102 (.079 ± .004) (.059 ± .004) (.157 ± .004) 7.493 ± .102 (.295 ± .004) 1 16 10.693 ± .025 (.421 ± .001) 12.090 (.476) 3.175 (.125) Top Cover Tape Embossed Carrier 16.002 ± .305 (.630 ± .012) .050R TYP. 11.989 ± .102 (.472 ± .004) 10.897 ± .025 (.429 ± .001) 1.549 ± .102 (.061 ± .004) User Direction of Feed Embossment Dimensions mm (inches) Rev. X www.clare.com 7 Worldwide Sales Offices CLARE LOCATIONS EUROPE ASIA/PACIFIC Clare Headquarters 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE European Headquarters CP Clare nv Bampslaan 17 B-3500 Hasselt (Belgium) Tel: 32-11-300868 Fax: 32-11-300890 Clare Micronix Division 145 Columbia Aliso Viejo, CA 92656-1490 Tel: 1-949-831-4622 Fax: 1-949-831-4628 France Clare France Sales Lead Rep 99 route de Versailles 91160 Champlan France Tel: 33 1 69 79 93 50 Fax: 33 1 69 79 93 59 Asian Headquarters Clare Room N1016, Chia-Hsin, Bldg II, 10F, No. 96, Sec. 2 Chung Shan North Road Taipei, Taiwan R.O.C. Tel: 886-2-2523-6368 Fax: 886-2-2523-6369 SALES OFFICES AMERICAS Americas Headquarters Clare 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Eastern Region Clare P.O. Box 856 Mahwah, NJ 07430 Tel: 1-201-236-0101 Fax: 1-201-236-8685 Toll Free: 1-800-27-CLARE Central Region Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Western Region Clare 1852 West 11th Street, #348 Tracy, CA 95376 Tel: 1-209-832-4367 Fax: 1-209-832-4732 Toll Free: 1-800-27-CLARE Canada Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Germany Clare Germany Sales ActiveComp Electronic GmbH Mitterstrasse 12 85077 Manching Germany Tel: 49 8459 3214 10 Fax: 49 8459 3214 29 Italy C.L.A.R.E.s.a.s. Via C. Colombo 10/A I-20066 Melzo (Milano) Tel: 39-02-95737160 Fax: 39-02-95738829 Sweden Clare Sales Comptronic AB Box 167 S-16329 Spånga Tel: 46-862-10370 Fax: 46-862-10371 United Kingdom Clare UK Sales Marco Polo House Cook Way Bindon Road Taunton UK-Somerset TA2 6BG Tel: 44-1-823 352541 Fax: 44-1-823 352797 http://www.clare.com Clare cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in this Clare product. No circuit patent licenses nor indemnity are expressed or implied. Clare reserves the right to change the specification and circuitry, without notice at any time. The products described in this document are not intended for use in medical implantation or other direct life support applications where malfunction may result in direct physical harm, injury or death to a person. Specification: DS-ITC117-Rxx ©Copyright 2000, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 3/22/01