PAA110L
DUAL POLE OptoMOS® Relay
Load Voltage
Load Current
Max RON
PAA110L
400
150
22
Description
PAA110 is a 400V, 150mA, 22Ω 2-Form-A relay. This
performance leader provides high peak load voltage handling capability and improved peak load current handling.
Current limiting version is available ("L" suffix, see specification for variations in performance).
Units
V
mA
Ω
Features
• Small 8 Pin DIP Package
• Low Drive Power Requirements (TTL/CMOS
Compatible)
• No Moving Parts
• High Reliability
• Arc-Free With No Snubbing Circuits
• 3750VRMS Input/Output Isolation
• VDE Compatible
• FCC Compatible
• No EMI/RFI Generation
• Machine Insertable, Wave Solderable
• Current Limiting, Surface Mount and Tape & Reel
Versions Available
Applications
• Telecommunications
• Telecom Switching
• Tip/Ring Circuits
• Modem Switching (Laptop, Notebook, Pocket Size)
• Hookswitch
• Dial Pulsing
• Ground Start
• Ringer Injection
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment-Patient/Equipment Isolation
• Security
• Aerospace
• Industrial Controls
Approvals
• UL Recognized: File Number E76270
• CSA Certified: File Number LR 43639-10
• BSI Certified:
• BS EN 60950:1992 (BS7002:1992)
Certificate #:7344
• BS EN 41003:1993
Certificate #:7344
Ordering Information
Part #
PAA110L
PAA110PL
PAA110PLTR
PAA110LS
PAA110LSTR
Description
8 Pin DIP (50/Tube)
8 Pin Flatpack (50/Tube)
8 Pin Flatpack (1000/Reel)
8 Pin Surface Mount (50/Tube)
8 Pin Surface Mount (1000/Reel)
Pin Configuration
PAA110L Pinout
AC/DC Configuration
+ Control - Switch #1
– Control - Switch #1
+ Control - Switch #2
– Control - Switch #2
1
8
2
7
3
6
4
5
Load - Switch #1
Load - Switch #1
Load - Switch #2
Load - Switch #2
Switching Characteristics of
Normally Open (Form A) Devices
10ms
CONTROL
+
90%
LOAD
10%+
10%+
TON
DS-PAA110L-R4
www.clare.com
TOFF
1
PAA110L
Absolute Maximum Ratings (@ 25˚ C)
Parameter
Min
Input Power Dissipation
-
-
1501
mW
Input Control Current
Peak (10ms)
-
-
50
1
mA
A
Reverse Input Voltage
-
-
5
V
-
-
8002
mW
Total Power Dissipation
Isolation Voltage
Input to Output
3750
-
-
VRMS
Operational Temperature
-40
-
+85
°C
Storage Temperature
-40
-
+125
°C
-
-
+260
°C
-
-
+220
°C
Soldering Temperature
DIP Package
Flatpack/Surface Mount
Package
(10 Seconds Max.)
1
Derate Linearly 1.33 mw/˚C
2
Derate Linearly 6.67 mw/˚C
Absolute Maximum Ratings are stress ratings. Stresses
in excess of these ratings can cause permanent damage
to the device. Functional operation of the device at these
or any other conditions beyond those indicated in the
operational sections of this data sheet is not implied.
Exposure of the device to the absolute maximum ratings
for an extended period may degrade the device and effect
its reliability.
Typ Max Units
Electrical Characteristics
Parameter
Conditions
Symbol
Min
Typ
Max
Units
Load Voltage (Peak)
-
VL
-
-
250
V
Load Voltage (Peak)
-
VL
-
-
400
V
-
IL
-
-
150
mA
10ms
ILPK
-
-
-
mA
Output Characteristics @ 25°C
Load Current* (Continuous)
AC/DC Configuration
Peak Load Current
On-Resistance
AC/DC Configuration
IL=150mA
RON
-
18
25
Ω
Off-State Leakage Current
VL=400V
ILEAK
-
-
1
µA
Switching Speeds
Turn-On
Turn-Off
IF=5mA, VL=10V
IF=5mA, VL=10V
TON
TOFF
-
-
1
0.25
ms
ms
Output Capacitance
50V; f=1MHz
COUT
-
25
-
pF
ICL
190
235
280
mA
-
-
3
-
pF
Load Current Limiting
Capacitance
Input to Output
-
Input Characteristics @ 25°C
Input Control Current
IL=150mA
IF
5
-
50
mA
Input Dropout Current
-
IF
0.4
0.7
-
mA
IF=5mA
VF
0.9
1.2
1.4
V
Reverse Input Voltage
-
VR
-
-
5
V
Reverse Input Current
VR=5V
IR
-
-
10
µA
Input Voltage Drop
Input to Output Capacitance
-
CI/O
-
3
-
pF
Input to Output Isolation
-
VI/O
3750
-
-
VRMS
*NOTE: If both poles operate simultaneously load current must be derated so as not to exceed the package power dissipation value.
2
www.clare.com
Rev. 4
PAA110L
PERFORMANCE DATA*
Device Count (N)
Device Count (N)
30
25
20
15
10
35
35
30
30
25
20
15
10
5
5
0
0
1.17
1.19
1.21
1.23
20
15
10
0
17.5
1.25
25
5
18.5
19.5
20.5
21.5
448
22.5
PAA110L
Typical IF for Switch Operation
(N=50 Ambient Temperature = 25°C)
(Load Current = 150mADC)
20
Device Count (N)
25
20
Device Count (N)
25
20
5
15
10
5
0
0
1.25
1.55
1.85
2.15
2.45
1.25
15
10
5
1.55
1.85
2.15
2.45
0.15
0.21
LED Current (mA)
LED Current (mA)
PAA110L
Typical Turn-Off Time
(N=50 Ambient Temperature = 25°C)
(Load Current = 150mADC; IF = 5mADC)
250
20
200
0.27
0.33
0.39
0.45
Turn-On (ms)
PAA110L
Typical Leakage vs. Temperature
(Measured across Pins 5 & 6 or 7 & 8)
PAA110L
Typical Load Current vs. Temperature
25
488
0
0.95
2.75
480
PAA110L
Typical Turn-On Time
(N=50 Ambient Temperature = 25°C)
(Load Current = 150mADC; IF = 5mADC)
25
10
472
Blocking Voltage (V)
PAA110L
Typical IF for Switch Dropout
(N=50 Ambient Temperature = 25°C)
15
464
456
On-Resistance (Ω)
LED Forward Voltage Drop (V)
Device Count (N)
PAA110L
Typical Blocking Voltage Distribution
(N=50 Ambient Temperature = 25°C)
Device Count (N)
35
PAA110L
Typical On-Resistance Distribution
(N=50 Ambient Temperature = 25°C)
(Load Current = 150mADC; IF = 5mADC)
PAA110L
Typical LED Forward Voltage Drop
(N=50 Ambient Temperature = 25°C)
IF = 5mADC
0.035
15
10
5
0
150
20mA
10mA
5mA
100
50
0.052
0.059
0.066
-20
0
20
40
60
80
100
485
-40
460
455
1.00
0.75
5mA
0.50
10mA
0.25
450
0
445
-40
-20
0
20
40
60
Temperature (°C)
80
100
-40
20
40
60
80
PAA110L
Typical Turn-Off vs. Temperature
(Load Current = 150mADC)
-20
0
20
40
60
Temperature (°C)
20mA
80
100
Turn-Off (ms)
Turn-On (ms)
465
0
PAA110L
Typical Turn-On vs. Temperature
(Load Current = 150mADC)
480
470
-20
Temperature (°C)
1.25
475
0.010
120
1.50
490
0.015
Temperature (°C)
Turn-Off (ms)
PAA110L
Typical Blocking Voltage vs. Temperature
0.020
0
-40
0.073
0.025
0.005
0
0.045
Blocking Voltage (VRMS)
Leakage (µA)
Load Current (mA)
Device Count (N)
0.030
0.10
0.09
0.08
0.07
0.06
0.05
0.04
0.03
0.02
0.01
0
100
5mA
-40
-20
0
20
40
60
80
100
Temperature (°C)
The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact
our application department.
Rev. 4
www.clare.com
3
PAA110L
PERFORMANCE DATA*
PAA110L
Typical Turn-On vs.LED Forward Current
(Load Current = 150mADC)
1.6
1.4
50mA
30mA
20mA
10mA
5mA
1.2
1.0
0.30
0.070
0.25
0.060
0.20
0.15
0.10
0.05
-40
-20
0
20
40
60
80
100
120
0.030
0.020
0
5
10
15
20
25
30
35
40
45
50
0
20.00
15.00
10.00
5.00
4.0
4.0
3.5
3.5
3.0
2.5
2.0
1.5
1.0
0.5
20
40
60
80
-40
100
PAA110L
Typical Load Current vs. Load Voltage
(Ambient Temperature = 25°C)
IF = 5mADC
Load Current (A)
0
-50
0
20
40
60
80
-150
-2.5 -2.0 -1.5 -1.0 -0.5
0
0.5 1.0 1.5 2.0 2.5
Load Voltage (V)
35
40
45
50
2.5
2.0
1.5
1.0
-40
-20
0
20
40
60
80
100
Temperature (°C)
PAA110L
Typical Current Limiting vs. Temperature
IF = 5mADC
1.2
350.00
1.0
300.00
0.8
0.6
0.4
0.2
-100
30
0
100
PAA110L
Energy Rating Curve
100
25
3.0
Temperature (°C)
Temperature (°C)
50
-20
Current (mA)
0
20
0.5
0
0
15
PAA110L
Typical IF for Switch Dropout
vs. Temperature
(Load Current = 150mADC)
LED Current (mA)
LED Current (mA)
25.00
-20
10
Forward Current (mA)
PAA110L
Typical IF for Switch Operation
vs. Temperature
(Load Current = 150mADC)
30.00
-40
5
Forward Current (mA)
PAA110L
Typical On-Resistance vs. Temperature
(Load Current = 150mADC; IF = 5mADC)
On-Resistance (Ω)
0.040
0.010
0
Temperature (°C)
Load Current (mA)
0.050
0
0.8
150
PAA110L
Typical Turn-Off vs. LED Forward Current
(Load Current = 150mADC)
Turn-Off (ms)
1.8
Turn-On (ms)
LED Forward Voltage Drop(V)
PAA110L
Typical LED Forward Voltage Drop
vs. Temperature
250.00
200.00
150.00
100.00
50.00
0
10µs 100µs 1ms 10ms 100ms
0
1s
Time
10s 100s
-40
-20
0
20
40
60
80
100
Temperature (°C)
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact
our application department.
4
www.clare.com
Rev. 4
PAA110L
Mechanical Dimensions
9.652 ± .381
(.380 ± .015)
8 Pin DIP Through Hole (Standard)
2.540 ± .127
8-.800 DIA. (.100 ± .005)
(8-.031 DIA.)
2.540 ± .127
(.100 ± .005)
7.620 ± .254
(.300 ± .010)
7.239 TYP.
(.285)
PC Board Pattern
(Top View)
3.302
(.130)
9.144 ± .508
(.360 ± .020)
6.350 ± .127
(.250 ± .005)
9.144 TYP.
(.360)
.457 ± .076
(.018 ± .003)
7.620 ± .127
(.300 ± .005)
8.077 ± .127
(.318 ± .005 )
9.652 ± .381
(.380 ± .015)
8 Pin DIP Surface Mount (“S” Suffix)
4.445 ± .127
(.175 ± .005)
3.302
(.130)
.254 TYP.
(.010)
(.100 ± .005)
9.525 ± .254
(.375 ± .010)
6.350 ± .127
(.250 ± .005)
.635 TYP.
(.025)
PC Board Pattern
(Top View)
2.540 ± .127
2.540 ± .127
(.100 ± .005)
7.620 ± .254
(.300 ± .010)
8.305 ± .127
(.327 ± .005)
1.905 ± .127
(.075 ± .005)
.457 ± .076
(.018 ± .003)
1.498 ± .127
(.059 ± .005)
8.077 ± .127
(.318 ± .005)
9.652 ± .381
(.380 ± .015)
2.540 ± .127
(.100 ± .005)
8 Pin Flatpack (“P” Suffix)
2.159 TYP.
(.085)
PC Board Pattern
(Top View)
2.540 ± .127
(.100 ± .005)
7.620 ± .254
(.300 ± .010)
2.286 MAX.
.635 ± .127
(.090)
(.025)
7.620 ± .127
(.300 ± .005)
6.350 ± .127
(.250 ± .005)
6.350 ± .127
(.250 ± .005)
9.398 ± .127
(.370 ± .005)
.203
(.008)
8.763 ± .127
(.345 ± .005)
1.193
(.047)
.457 ± .076
(.018 ± .003)
8.077 ± .127
(.318 ± .005)
.787
(.031)
Dimensions
mm
(inches)
Rev. 4
www.clare.com
5
PAA110L
Mechanical Dimensions
Tape and Reel Packaging for 8 Pin Surface Mount Package
330.2 DIA.
(13.00)
6.731 MAX.
1.753 ± .102
(.265)
(.069 ± .004)
.406 MAX.
(.016)
Top Cover
Tape Thickness
.102 MAX.
(.004)
2.007 ± .102 1.498 ± .102 3.987 ± .102
(.079 ± .004) (.059 ± .004) (.157 ± .004)
7.493 ± .102
(.295 ± .004)
1
8
12.090
(.476)
10.300
(.405)
4.877
(.192)
Top Cover
Tape
Embossed Carrier
16.002 ± .305
(.630 ± .012)
.050R TYP.
11.989 ± .102
(.472 ± .004)
10.300 ± .102
(.405 ± .004)
1.549 ± .102
(.061 ± .004)
User Direction of Feed
Embossment
Tape and Reel Packaging for 8 Pin Flatpack Package
330.2 DIA.
(13.00)
Top Cover
Tape Thickness
.102 MAX.
(.004)
6.731 MAX.
1.753 ± 0.102
(.265)
(.069 ± .004)
.406 MAX.
(.016)
2.007 ± .102 1.498 ± .102 3.987 ± .102
(.079 ± .004) (.059 ± .004) (.157 ± .004)
7.493 ± .102
(.295 ± .004)
1
8
12.090
(.476)
10.287
(.405)
4.877
(.192)
Top Cover
Tape
Embossed Carrier
Embossment
16.002 ± .305
(.630 ± .012)
.050R TYP.
11.988 ± .102
(.472 ± .004)
10.287 ± .102
(.405 ± .004)
1.549 ± .102
(.061 ± .004)
User Direction of Feed
Dimensions
mm
(inches)
6
www.clare.com
Rev. 4
Worldwide Sales Offices
CLARE LOCATIONS
EUROPE
ASIA/PACIFIC
Clare Headquarters
78 Cherry Hill Drive
Beverly, MA 01915
Tel: 1-978-524-6700
Fax: 1-978-524-4900
Toll Free: 1-800-27-CLARE
European Headquarters
CP Clare nv
Bampslaan 17
B-3500 Hasselt (Belgium)
Tel: 32-11-300868
Fax: 32-11-300890
Clare Micronix Division
145 Columbia
Aliso Viejo, CA 92656-1490
Tel: 1-949-831-4622
Fax: 1-949-831-4628
France
Clare France Sales
Lead Rep
99 route de Versailles
91160 Champlan
France
Tel: 33 1 69 79 93 50
Fax: 33 1 69 79 93 59
Asian Headquarters
Clare
Room N1016, Chia-Hsin, Bldg II,
10F, No. 96, Sec. 2
Chung Shan North Road
Taipei, Taiwan R.O.C.
Tel: 886-2-2523-6368
Fax: 886-2-2523-6369
SALES OFFICES
AMERICAS
Americas Headquarters
Clare
78 Cherry Hill Drive
Beverly, MA 01915
Tel: 1-978-524-6700
Fax: 1-978-524-4900
Toll Free: 1-800-27-CLARE
Eastern Region
Clare
P.O. Box 856
Mahwah, NJ 07430
Tel: 1-201-236-0101
Fax: 1-201-236-8685
Toll Free: 1-800-27-CLARE
Central Region
Clare Canada Ltd.
3425 Harvester Road, Suite 202
Burlington, Ontario L7N 3N1
Tel: 1-905-333-9066
Fax: 1-905-333-1824
Western Region
Clare
1852 West 11th Street, #348
Tracy, CA 95376
Tel: 1-209-832-4367
Fax: 1-209-832-4732
Toll Free: 1-800-27-CLARE
Canada
Clare Canada Ltd.
3425 Harvester Road, Suite 202
Burlington, Ontario L7N 3N1
Tel: 1-905-333-9066
Fax: 1-905-333-1824
Germany
Clare Germany Sales
ActiveComp Electronic GmbH
Mitterstrasse 12
85077 Manching
Germany
Tel: 49 8459 3214 10
Fax: 49 8459 3214 29
Italy
C.L.A.R.E.s.a.s.
Via C. Colombo 10/A
I-20066 Melzo (Milano)
Tel: 39-02-95737160
Fax: 39-02-95738829
Sweden
Clare Sales
Comptronic AB
Box 167
S-16329 Spånga
Tel: 46-862-10370
Fax: 46-862-10371
United Kingdom
Clare UK Sales
Marco Polo House
Cook Way
Bindon Road
Taunton
UK-Somerset TA2 6BG
Tel: 44-1-823 352541
Fax: 44-1-823 352797
http://www.clare.com
Clare cannot assume responsibility for use of any circuitry other
than circuitry entirely embodied in this Clare product. No circuit
patent licenses nor indemnity are expressed or implied. Clare
reserves the right to change the specification and circuitry, without notice at any time. The products described in this document
are not intended for use in medical implantation or other direct life
support applications where malfunction may result in direct physical harm, injury or death to a person.
Specification: DS-PAA110L-R4
©Copyright 2001, Clare, Inc.
OptoMOS® is a registered trademark of Clare, Inc.
All rights reserved. Printed in USA.
6/19/01