PAA110 Single Pole OptoMOS® Relays Load Voltage Load Current Max RON PAA110 400 150 22 Description PAA110 is a 400V, 150mA, 22Ω 2-Form-A relay. This performance leader provides high peak load voltage handling capability and improved peak load current handling. Units V mA Ω Features • Small 8 Pin DIP Package • Low Drive Power Requirements (TTL/CMOS Compatible) • No Moving Parts • High Reliability • Arc-Free With No Snubbing Circuits • 3750VRMS Input/Output Isolation • VDE Compatible • FCC Compatible • No EMI/RFI Generation • Machine Insertable, Wave Solderable • Surface Mount and Tape & Reel Versions Available Applications • Telecommunications • Telecom Switching • Tip/Ring Circuits • Modem Switching (Laptop, Notebook, Pocket Size) • Hookswitch • Dial Pulsing • Ground Start • Ringer Injection • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment-Patient/Equipment Isolation • Security • Aerospace • Industrial Controls Approvals • UL Recognized: File Number E76270 • CSA Certified: File Number LR 43639-10 • BSI Certified: • BS EN 60950:1992 (BS7002:1992) Certificate #:7344 • BS EN 41003:1993 Certificate #:7344 Ordering Information Part # PAA110 PAA110P PAA110PTR PAA110S PAA110STR Description 8 Pin DIP (50/Tube) 8 Pin Flatpack (50/Tube) 8 Pin Flatpack (1000/Reel) 8 Pin Surface Mount (50/Tube) 8 Pin Surface Mount (1000/Reel) Pin Configuration PAA110 Pinout AC/DC Configuration + Control - Switch #1 – Control - Switch #1 + Control - Switch #2 – Control - Switch #2 1 8 2 7 3 6 4 5 Load - Switch #1 Load - Switch #1 Load - Switch #2 Load - Switch #2 Switching Characteristics of Normally Open (Form A) Devices 10ms CONTROL LOAD 10%+ +90% TON DS-PAA110-R3.0 www.clare.com 10%+ TOFF 1 PAA110 Absolute Maximum Ratings (@ 25˚ C) Parameter Min Input Power Dissipation - - 1501 mW Input Control Current - - 50 mA - - 1 A - - 5 V - - 8002 mW 3750 - - VRMS Operational Temperature -40 - +85 °C Storage Temperature -40 - +125 °C - - +260 °C - - +220 °C Peak (10ms) Reverse Input Voltage Total Power Dissipation Isolation Voltage Input to Output Soldering Temperature DIP Package Flatpack/Surface Mount Package (10 Seconds Max.) 1 Derate Linearly 1.33 mw/˚C 2 Derate Linearly 6.67 mw/˚C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Typ Max Units Electrical Characteristics Parameter Conditions Symbol Min Typ Max Units Load Voltage (Peak) - VL - - 400 V Load Current* (Continuous) AC/DC Configuration - IL - - 150 mA 10ms ILPK - - 400 mA On-Resistance AC/DC Configuration IL=150mA RON - 15 22 Ω Off-State Leakage Current VL=400V ILEAK - - 1 µA IF=5mA, VL=10V TON - - 1 ms IF=5mA, VL=10V TOFF - - 0.25 ms 50V; f=1MHz COUT - 25 - pF ICL - - - mA Output Characteristics @ 25°C Peak Load Current Switching Speeds Turn-On Turn-Off Output Capacitance Load Current Limiting Input Characteristics @ 25°C Input Control Current IL=150mA IF 5 - 50 mA Input Dropout Current - IF 0.4 0.7 - mA IF=5mA VF 0.9 1.2 1.4 V Reverse Input Voltage - VR - - 5 V Reverse Input Current VR=5V IR - - 10 µA Input Voltage Drop Input to Output Capacitance - CI/O - 3 - pF Input to Output Isolation - VI/O 3750 - - VRMS *NOTE: If both poles operate simultaneously load current must be derated so as not to exceed the package power dissipation value. 2 www.clare.com Rev. 3.0 PAA110 PERFORMANCE DATA* Device Count (N) 25 20 15 10 35 35 30 30 25 20 15 10 5 5 0 0 1.17 1.19 1.21 1.23 1.25 13.7 14.3 14.9 15.5 10 441.5 450.5 16.1 25 20 20 20 5 Device Count (N) 25 10 15 10 5 0 0 1.05 1.35 1.65 1.95 1.05 Load Current (mA) 20 15 10 5 1.35 1.65 1.95 0.07 0.09 0.11 0.13 5 2.25 0.15 0.035 250 0.030 200 150 100 20mA 10mA 5mA 50 -40 0.15 -20 0 20 PAA110 Typical Blocking Voltage vs. Temperature 40 60 80 100 0.010 0.005 0 120 -40 Turn-On (ms) -20 0 20 40 60 Temperature (°C) 80 100 0.75 5mA 10mA 20mA 0.50 -40 40 60 80 100 PAA110 Typical Turn-Off vs. Temperature (Load Current = 150mADC) 0.120 0 20 PAA110 Typical Turn-On vs. Temperature (Load Current = 150mADC) 1.00 450 0 Temperature (°C) 0.140 0.25 -20 Temperature (°C) 1.25 455 0.45 0.015 475 460 0.39 0.020 1.50 465 0.33 0.025 480 470 0.27 PAA110 Typical Leakage vs. Temperature (Measured across Pins 4 & 6) 300 Turn-Off (ms) -40 0.21 Turn-On (ms) 0 0 0.05 10 PAA110 Typical Load Current vs. Temperature 25 486.5 15 LED Current (mA) LED Current (mA) PAA110 Typical Turn-Off Time (N=50 Ambient Temperature = 25°C) (Load Current = 150mADC; IF = 5mADC) 477.5 0 0.75 2.25 Leakage (µA) 0.75 468.5 PAA110 Typical Turn-On Time (N=50 Ambient Temperature = 25°C) (Load Current = 150mADC; IF = 5mADC) 25 15 459.5 Blocking Voltage (V) PAA110 Typical IF for Switch Dropout (N=50 Ambient Temperature = 25°C) Device Count (N) Device Count (N) 15 On-Resistance (Ω) PAA110 Typical IF for Switch Operation (N=50 Ambient Temperature = 25°C) (Load Current = 150mADC) Device Count (N) 20 0 13.1 LED Forward Voltage Drop (V) Blocking Voltage (VRMS) 25 5 -20 0 20 40 60 Temperature (°C) 80 100 Turn-Off (ms) Device Count (N) 30 PAA110 Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25°C) Device Count (N) 35 PAA110 Typical On-Resistance Distribution (N=50 Ambient Temperature = 25°C) (Load Current = 150mADC; IF = 5mADC) PAA110 Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25°C) IF = 5mADC 0.100 0.080 0.060 0.040 0.020 0 -40 -20 0 20 40 60 80 100 Temperature (°C) * The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 3.0 www.clare.com 3 PAA110 PERFORMANCE DATA* PAA110 Typical Turn-On vs. LED Forward Current (Load Current = 150mADC) 1.8 PAA110 Typical Turn-Off vs. LED Forward Current (Load Current = 150mADC) 0.40 0.12 0.35 1.4 50mA 30mA 20mA 10mA 5mA 1.2 1.0 0.10 0.30 0.25 Turn-Off (ms) 1.6 Turn-On (ms) LED Forward Voltage Drop(V) PAA110 Typical LED Forward Voltage Drop vs. Temperature 0.20 0.15 0.10 0.05 0.8 0.08 0.06 0.04 0.02 0 -40 -20 0 20 40 60 80 100 120 0 5 10 Temperature (°C) 15 20 25 30 35 40 45 50 0 0 LED Forward Current (mA) 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) PAA110 Typical IF for Switch Operation vs. Temperature (Load Current = 150mADC) 20 LED Current (mA) On-Resistance (Ω) 25 15 10 5 3.000 3.000 2.500 2.500 2.000 1.500 1.000 -20 0 20 40 60 80 -40 100 150 -20 0 20 40 60 80 100 PAA110 Typical Load Current vs. Load Voltage (Ambient Temperature = 25°C) IF = 5mADC 1.000 -40 -20 0 20 40 60 80 100 Temperature (°C) Temperature (°C) Temperature (°C) 1.500 0 0 -40 2.000 0.500 0.500 0 PAA110 Energy Rating Curve 1.2 1.0 100 Load Current (A) Load Current (mA) PAA110 Typical IF for Switch Dropout vs. Temperature (Load Current = 150mA) LED Current (mA) PAA110 Typical On-Resistance vs. Temperature (Load Current = 150mADC; IF = 5mADC) 50 0 -50 0.8 0.6 0.4 0.2 -100 -150 -2.5 -2.0 -1.5 -1.0 -0.5 0 0.5 1.0 1.5 2.0 2.5 Load Voltage (V) 0 10µs 100µs 1ms 10ms 100ms 1s 10s 100s Time * The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com Rev. 3.0 PAA110 MECHANICAL DIMENSIONS 9.652 ± .381 (.380 ± .015) 8 Pin DIP Through Hole (Standard) 2.540 ± .127 8-.800 DIA. (.100 ± .005) (8-.031 DIA.) 2.540 ± .127 (.100 ± .005) 7.620 ± .254 (.300 ± .010) 7.239 TYP. (.285) PC Board Pattern (Top View) 3.302 (.130) 9.144 ± .508 (.360 ± .020) 6.350 ± .127 (.250 ± .005) 9.144 TYP. (.360) .457 ± .076 (.018 ± .003) 7.620 ± .127 (.300 ± .005) 8.077 ± .127 (.318 ± .005 ) 9.652 ± .381 (.380 ± .015) 8 Pin DIP Surface Mount (“S” Suffix) 4.445 ± .127 (.175 ± .005) 3.302 (.130) .254 TYP. (.010) (.100 ± .005) 9.525 ± .254 (.375 ± .010) 6.350 ± .127 (.250 ± .005) .635 TYP. (.025) PC Board Pattern (Top View) 2.540 ± .127 2.540 ± .127 (.100 ± .005) 7.620 ± .254 (.300 ± .010) 8.305 ± .127 (.327 ± .005) 1.905 ± .127 (.075 ± .005) .457 ± .076 (.018 ± .003) 1.498 ± .127 (.059 ± .005) 8.077 ± .127 (.318 ± .005) 9.652 ± .381 (.380 ± .015) 2.540 ± .127 (.100 ± .005) 8 Pin Flatpack (“P” Suffix) 2.159 TYP. (.085) PC Board Pattern (Top View) 2.540 ± .127 (.100 ± .005) 7.620 ± .254 (.300 ± .010) 2.286 MAX. .635 ± .127 (.090) (.025) 7.620 ± .127 (.300 ± .005) 6.350 ± .127 (.250 ± .005) 6.350 ± .127 (.250 ± .005) 9.398 ± .127 (.370 ± .005) .203 (.008) 8.763 ± .127 (.345 ± .005) 1.193 (.047) .457 ± .076 (.018 ± .003) 8.077 ± .127 (.318 ± .005) .787 (.031) Dimensions mm (inches) Rev. 3.0 www.clare.com 5 PAA110 MECHANICAL DIMENSIONS Tape and Reel Packaging for 8 Pin Surface Mount Package 330.2 DIA. (13.00) 6.731 MAX. 1.753 ± .102 (.265) (.069 ± .004) .406 MAX. (.016) Top Cover Tape Thickness .102 MAX. (.004) 2.007 ± .102 1.498 ± .102 3.987 ± .102 (.079 ± .004) (.059 ± .004) (.157 ± .004) 7.493 ± .102 (.295 ± .004) 1 8 12.090 (.476) 10.300 (.405) 4.877 (.192) Top Cover Tape Embossed Carrier 16.002 ± .305 (.630 ± .012) .050R TYP. 11.989 ± .102 (.472 ± .004) 10.300 ± .102 (.405 ± .004) 1.549 ± .102 (.061 ± .004) User Direction of Feed Embossment Tape and Reel Packaging for 8 Pin Flatpack Package 330.2 DIA. (13.00) Top Cover Tape Thickness .102 MAX. (.004) 6.731 MAX. 1.753 ± 0.102 (.265) (.069 ± .004) .406 MAX. (.016) 2.007 ± .102 1.498 ± .102 3.987 ± .102 (.079 ± .004) (.059 ± .004) (.157 ± .004) 7.493 ± .102 (.295 ± .004) 1 8 12.090 (.476) 10.287 (.405) 4.877 (.192) Top Cover Tape Embossed Carrier Embossment 16.002 ± .305 (.630 ± .012) .050R TYP. 11.988 ± .102 (.472 ± .004) 10.287 ± .102 (.405 ± .004) 1.549 ± .102 (.061 ± .004) User Direction of Feed Dimensions mm (inches) 6 www.clare.com Rev. 3.0 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-PAA110-R3.0 ©Copyright 2001, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 11/8/01