PAA140 Single Pole OptoMOS® Relays Load Voltage Load Current Max RON PAA140 400 250 8 Description PAA140 is a 400V, 250mA, 8Ω 2-Form-A relay. This performance leader provides a high peak load voltage handling capability combined with a very low resistance for specialized applications. Units V mA Ω Features • Small 8 Pin DIP Package • Low Drive Power Requirements (TTL/CMOS Compatible) • No Moving Parts • High Reliability • Arc-Free With No Snubbing Circuits • 3750VRMS Input/Output Isolation • No EMI/RFI Generation • Machine Insertable, Wave Solderable • Surface Mount and Tape & Reel Versions Available Approvals These products comply with the requirements of: • • • • • UL 1577 (UL recognized file #E76270) CSA #14 (CSA certified file #LR43639) EN 60950 IEC 950 AS/NZS 3260 Ordering Information Applications • Telecommunications • Telecom Switching • Tip/Ring Circuits • Modem Switching (Laptop, Notebook, Pocket Size) • Hookswitch • Dial Pulsing • Ground Start • Ringer Injection • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment-Patient/Equipment Isolation • Security • Aerospace • Industrial Controls Part # PAA140 PAA140P PAA140PTR PAA140S PAA140STR Description 8 Pin DIP (50/Tube) 8 Pin Flatpack (50/Tube) 8 Pin Flatpack (1000/Reel) 8 Pin Surface Mount (50/Tube) 8 Pin Surface Mount (1000/Reel) Pin Configuration PAA140 Pinout AC/DC Configuration + Control - Switch #1 – Control - Switch #1 + Control - Switch #2 – Control - Switch #2 1 8 2 7 3 6 4 5 Load - Switch #1 Load - Switch #1 Load - Switch #2 Load - Switch #2 Switching Characteristics of Normally Open (Form A) Devices 10ms CONTROL LOAD 10%+ DS-PAA140-R5 www.clare.com +90% 10%+ TON TOFF 1 PAA140 Absolute Maximum Ratings (@ 25˚ C) Parameter Input Power Dissipation Input Control Current Peak (10ms) Reverse Input Voltage Total Power Dissipation Isolation Voltage Input to Output Operational Temperature Storage Temperature Soldering Temperature DIP Package Flatpack/Surface Mount Package (10 Seconds Max.) 1 Derate Linearly 1.33 mw/˚C 2 Derate Linearly 6.67 mw/˚C Min Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Typ Max Units - - 1501 3750 -40 -40 - VRMS °C +85 +125 °C - - +260 °C - - +220 °C 50 1 5 8002 mW mA A V mW Electrical Characteristics Parameter Output Characteristics @ 25°C Load Voltage (Peak) Load Current* (Continuous) AC/DC Configuration Peak Load Current On-Resistance AC/DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Capacitance Input to Output Input Characteristics @ 25°C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Voltage Reverse Input Current Input to Output Capacitance Input to Output Isolation Conditions Symbol Min Typ MaX Units - VL - - 400 V 10ms IL ILPK - - 250 500 mA mA IL=250mA VL=400V RON ILEAK - 6 - 8 1 Ω µA IF=5mA, VL=10V IF=5mA, VL=10V 50V; f=1MHz TON TOFF COUT - 65 3.0 1.0 - ms ms pF - - - 3 - pF IL= 250mA IF= 5mA VR=5V - IF IF VF VR IR CI/O VI/O 5 0.4 0.9 3750 0.7 1.2 3 - 50 1.4 5 10 - mA mA V V µA pF VRMS *NOTE: If both poles operate simultaneously load current must be derated so as not to exceed the package power dissipation value. 2 www.clare.com Rev. 5 PAA140 PERFORMANCE DATA* PAA140 Typical On-Resistance Distribution (N=50 Ambient Temperature = 25°C) (Load Current = 250mADC, IF = 5mADC) 35 30 30 25 20 15 10 25 20 15 10 5 5 0 0 1.19 1.21 1.23 1.25 Device Count (N) 35 30 1.17 20 15 10 0 5.03 5.38 5.73 6.08 6.43 6.78 430 7.13 20 20 10 5 0 2.7 3.3 3.9 4.5 Device Count (N) 20 Device Count (N) 25 15 15 10 5 0 5.1 5 1.5 2.1 2.7 3.3 3.9 0.39 4.5 0.10 0 250 20mA 10mA 5mA 200 150 -40 -20 0 20 40 60 80 100 455 1.50 1.00 10mA 20mA 450 445 60 Temperature (°C) 80 100 20 40 60 80 10 0.06 5mA 0.50 40 0 PAA140 Typical Turn-Off vs. Temperature (Load Current = 250mADC) 0 -40 -20 0 20 40 60 Temperature (°C) 80 100 Turn-Off (ms) Turn-On (ms) 460 20 -20 0.07 2.00 0 -40 Temperature (°C) 2.50 465 1.95 0.04 0 120 480 470 1.69 0.06 PAA140 Typical Turn-On vs. Temperature (Load Current = 250mADC) PAA140 Typical Blocking Voltage vs. Temperature 475 1.43 0.08 Temperature (°C) Turn-Off (ms) 485 1.17 0.02 100 0.018 0.030 0.042 0.054 0.066 0.078 0.090 Blocking Voltage (VRMS) Leakage (µA) 300 Load Current (mA) 20 -20 0.91 PAA140 Typical Leakage vs. Temperature (Measured across Pins 5 & 6 or 7 & 8 PAA140 Typical Load Current vs. Temperature 0.12 -40 0.65 Turn-On (ms) 350 5 502 10 25 10 490 15 LED Current (mA) 15 478 0 0.9 LED Current (mA) PAA140 Typical Turn-Off Time (N=50 Ambient Temperature = 25°C) (Load Current = 250mADC; IF = 5mADC) 466 PAA140 Typical Turn-On Time (N=50 Ambient Temperature = 25°C) (Load Current = 250mADC; IF = 5mADC) PAA140 Typical IF for Switch Dropout (N=50 Ambient Temperature = 25°C) (Load Current = 250mADC) 25 2.1 454 Blocking Voltage (V) 25 1.5 442 On-Resistance (Ω) PAA140 Typical IF for Switch Operation (N=50 Ambient Temperature = 25°C) (Load Current = 250mADC) Device Count (N) 25 5 LED Forward Voltage Drop (V) Device Count (N) PAA140 Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25°C) 35 Device Count (N) Device Count (N) PAA140 Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25°C; IF = 5mADC) 0.05 0.04 0.03 5mA 0.02 0.01 0 -40 -20 0 20 40 60 80 100 Temperature (°C) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 5 www.clare.com 3 PAA140 PERFORMANCE DATA* PAA140 Typical Turn-On vs. LED Forward Current (Load Current = 250mADC) 1.6 1.4 50mA 30mA 20mA 10mA 5mA 1.2 1.0 0.8 -40 -20 0 20 40 60 80 100 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 120 5 5.0 9 4.5 8 7 6 80 100 45 50 0 5 15 20 25 30 35 40 45 50 LED Forward Current (mA) PAA140 Typical IF for Switch Dropout vs. Temperature (Load Current = 250mADC) 4.5 4.0 3.5 3.0 2.5 2.0 1.5 -20 0 20 40 60 80 100 Temperature (°C) PAA140 Typical Load Current vs. Load Voltage (Ambient Temperature = 25°C; IF = 5mADC) 10 5.0 -40 Temperature (°C) -40 -20 0 20 40 60 80 100 Temperature (°C) PAA140 Energy Rating Curve 1.2 1.0 Load Current (A) Load Current (mA) 40 2.5 1.5 250 200 150 100 50 0 -50 -100 -150 -200 -250 -2.0 -1.5 35 3.0 4 60 30 3.5 2.0 40 25 4.0 5 20 20 LED Current (mA) 10 0 15 PAA140 Typical IF for Switch Operation vs. Temperature (Load Current = 250mADC) LED Current (mA) On-Resistance (Ω) PAA140 Typical On-Resistance vs. Temperature (Load Current = 250mADC; IF = 5mA) -20 10 0.050 0.045 0.040 0.035 0.030 0.025 0.020 0.015 0.010 0.005 0 LED Forward Current (mA) Temperature (°C) -40 PAA140 Typical Turn-Off vs. LED Forward Current (Load Current = 250mADC) Turn-Off (ms) 1.8 Turn-On (ms) LED Forward Voltage Drop(V) PAA140 Typical LED Forward Voltage Drop vs. Temperature 0.8 0.6 0.4 0.2 -1.0 -0.5 0 0.5 Load Voltage (V) 1.0 1.5 2.0 0 10µs 100µs 1ms 10ms 100ms 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com Rev. 5 PAA140 MECHANICAL DIMENSIONS 9.652 ± .381 (.380 ± .015) 8 Pin DIP Through Hole (Standard) 2.540 ± .127 8-.800 DIA. (.100 ± .005) (8-.031 DIA.) 2.540 ± .127 (.100 ± .005) 7.620 ± .254 (.300 ± .010) 7.239 TYP. (.285) PC Board Pattern (Top View) 3.302 (.130) 9.144 ± .508 (.360 ± .020) 6.350 ± .127 (.250 ± .005) 9.144 TYP. (.360) .457 ± .076 (.018 ± .003) 7.620 ± .127 (.300 ± .005) 8.077 ± .127 (.318 ± .005 ) 9.652 ± .381 (.380 ± .015) 8 Pin DIP Surface Mount (“S” Suffix) 4.445 ± .127 (.175 ± .005) 3.302 (.130) .254 TYP. (.010) (.100 ± .005) 9.525 ± .254 (.375 ± .010) 6.350 ± .127 (.250 ± .005) .635 TYP. (.025) PC Board Pattern (Top View) 2.540 ± .127 2.540 ± .127 (.100 ± .005) 7.620 ± .254 (.300 ± .010) 8.305 ± .127 (.327 ± .005) 1.905 ± .127 (.075 ± .005) .457 ± .076 (.018 ± .003) 1.498 ± .127 (.059 ± .005) 8.077 ± .127 (.318 ± .005) 9.652 ± .381 (.380 ± .015) 2.540 ± .127 (.100 ± .005) 8 Pin Flatpack (“P” Suffix) 2.159 TYP. (.085) PC Board Pattern (Top View) 2.540 ± .127 (.100 ± .005) 7.620 ± .254 (.300 ± .010) 2.286 MAX. .635 ± .127 (.090) (.025) 7.620 ± .127 (.300 ± .005) 6.350 ± .127 (.250 ± .005) 6.350 ± .127 (.250 ± .005) 9.398 ± .127 (.370 ± .005) .203 (.008) 8.763 ± .127 (.345 ± .005) 1.193 (.047) .457 ± .076 (.018 ± .003) 8.077 ± .127 (.318 ± .005) .787 (.031) Dimensions mm (inches) Rev. 5 www.clare.com 5 PAA140 MECHANICAL DIMENSIONS Tape and Reel Packaging for 8 Pin Surface Mount Package 330.2 DIA. (13.00) 6.731 MAX. 1.753 ± .102 (.265) (.069 ± .004) .406 MAX. (.016) Top Cover Tape Thickness .102 MAX. (.004) 2.007 ± .102 1.498 ± .102 3.987 ± .102 (.079 ± .004) (.059 ± .004) (.157 ± .004) 7.493 ± .102 (.295 ± .004) 1 12.090 (.476) 10.300 (.405) 4.877 (.192) Top Cover Tape Embossed Carrier 16.002 ± .305 (.630 ± .012) 8 11.989 ± .102 (.472 ± .004) .050R TYP. 10.300 ± .102 (.405 ± .004) 1.549 ± .102 (.061 ± .004) User Direction of Feed Embossment Tape and Reel Packaging for 8 Pin Flatpack Package 330.2 DIA. (13.00) Top Cover Tape Thickness .102 MAX. (.004) 6.731 MAX. 1.753 ± 0.102 (.265) (.069 ± .004) .406 MAX. (.016) 2.007 ± .102 1.498 ± .102 3.987 ± .102 (.079 ± .004) (.059 ± .004) (.157 ± .004) 7.493 ± .102 (.295 ± .004) 1 8 12.090 (.476) 10.287 (.405) 4.877 (.192) Top Cover Tape Embossed Carrier 16.002 ± .305 (.630 ± .012) .050R TYP. 11.988 ± .102 (.472 ± .004) Embossment 10.287 ± .102 (.405 ± .004) 1.549 ± .102 (.061 ± .004) User Direction of Feed Dimensions mm (inches) 6 www.clare.com Rev. 5 Worldwide Sales Offices CLARE LOCATIONS EUROPE ASIA/PACIFIC Clare Headquarters 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE European Headquarters CP Clare nv Bampslaan 17 B-3500 Hasselt (Belgium) Tel: 32-11-300868 Fax: 32-11-300890 Clare Micronix Division 145 Columbia Aliso Viejo, CA 92656-1490 Tel: 1-949-831-4622 Fax: 1-949-831-4628 France Clare France Sales Lead Rep 99 route de Versailles 91160 Champlan France Tel: 33 1 69 79 93 50 Fax: 33 1 69 79 93 59 Asian Headquarters Clare Room N1016, Chia-Hsin, Bldg II, 10F, No. 96, Sec. 2 Chung Shan North Road Taipei, Taiwan R.O.C. Tel: 886-2-2523-6368 Fax: 886-2-2523-6369 SALES OFFICES AMERICAS Americas Headquarters Clare 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Eastern Region Clare 603 Apache Court Mahwah, NJ 07430 Tel: 1-201-236-0101 Fax: 1-201-236-8685 Toll Free: 1-800-27-CLARE Central Region Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Western Region Clare 1852 West 11th Street, #348 Tracy, CA 95376 Tel: 1-209-832-4367 Fax: 1-209-832-4732 Toll Free: 1-800-27-CLARE Canada Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Germany Clare Germany Sales ActiveComp Electronic GmbH Mitterstrasse 12 85077 Manching Germany Tel: 49 8459 3214 10 Fax: 49 8459 3214 29 Italy C.L.A.R.E.s.a.s. Via C. Colombo 10/A I-20066 Melzo (Milano) Tel: 39-02-95737160 Fax: 39-02-95738829 http://www.clare.com Sweden Clare Sales Comptronic AB Box 167 S-16329 Spånga Tel: 46-862-10370 Fax: 46-862-10371 United Kingdom Clare UK Sales Marco Polo House Cook Way Bindon Road Taunton UK-Somerset TA2 6BG Tel: 44-1-823 352541 Fax: 44-1-823 352797 Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-PAA140-R5 ©Copyright 2001, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 8/7/01