Diode Network / ESD Suppressor CDA3S06-G (RoHS Device) Voltage:10 Volts Current: 50 mA Package (SOT23-6) Feature Marking “ DN3 “ This diode network is designedto provide four channels for active termination of high-speed data signals to eliminate signal undershootand overshoot. The network has the added benefit of acting to suppress any ESD voltage events by shunting the energy to ground assuring maximum reliability of electronic systems in the field. Trigger levels are defined by the positive and negative bias levels set by the Schematic user. 6 4 1 3 RoHS Device has reflow temperature profile of 260 deg C for 10 seconds Application Positive Supply ESD Driver Receiver Neg. Supply or Gnd. o Absolute Maximum Ratings: ( Ta = 25 C ) Symbol Parameter TOP Operating temperature VS Supply voltage (Vp ~ Vn) IF Continuous forward current Total power PO * One diode conducting. Electrical Ratings: ( Ta = 25oC ) Symbol Characteristic VF Forward voltage VR Reverse breakdown voltage IL Leakage current CT Capacitance VESD Channel clamp voltage VPV Peak ESD voltage capability Value -40 to +85 8 50 1 Min 0.6 9.5 ± 0.1 1.0 - Max 0.95 11 ± 2.0 5.0 ± 10 16 Units 0 C V mA W Units V V uA pF V kV Test Condition IF = 25 ma IR = 1 ma 8v @ 1Mhz 8kV HBM HBM “-G” suffix designates RoHS compliant version. MDS0903002A Page 1 Comchip Technology Corporation • Tel: 510-657-8671 • Fax: 510-657-8921 • www.comchiptech.com