PACKAGE OUTLINE, 40L THIN QFN 5x5x0.8mm BODY / 0.4mm LEAD PITCH 21-0159 A 1 2 NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETERS. ANGLES IN DEGREES. 2. COPLANARITY APPLIES TO THE EXPOSED PAD AS WELL AS THE TERMINALS. COPLANARITY SHALL NOT EXCEED 0.08mm. 3. WARPAGE SHALL NOT EXCEED 0.10mm. 4. PACKAGE LENGTH / PACKAGE WIDTH ARE CONSIDERED AS SPECIAL CHARACTERISTICS. (S) 5. REFER TO JEDEC MO-220. 6. THE TERMINAL #1 IDENTIFIER AND TERMINAL NUMBERING CONVENTION SHALL CONFORM TO JESD 95-1 SPP-012. DETAILS OF TERMINAL #1 IDENTIFIER ARE OPTIONAL, BUT MUST BE LOCATED WITHIN THE ZONE INDICATED. THE TERMINAL #1 IDENTIFIER MAY BE EITHER A MOLD OR MARKED FEATURE. 7. ND AND NE REFER TO THE NUMBER OF TERMINALS ON EACH D AND E SIDE RESPECTIVELY. COMMON DIMENSIONS EXPOSED PAD VARIATONS MIN. NOM. MAX. A 0.700 0.750 0.800 A1 0.000 -- -- 0.050 SYMBOLS A2 D2 E2 PKG. CODE MIN. NOM. MAX. MIN. NOM. MAX. T4055-1 3.20 3.30 3.40 3.20 3.30 3.40 0.200 REF. b 0.150 0.200 0.250 D 4.900 5.000 5.100 e 0.400 TYP. E 4.900 5.000 5.100 k 0.250 0.350 0.450 k1 0.350 0.450 0.550 L 0.400 0.500 0.600 L1 0.300 0.400 0.500 N 40 ND 10 NE 10 PACKAGE OUTLINE, 40L THIN QFN 5x5x0.8mm BODY / 0.4mm LEAD PITCH 21-0159 A 2 2