SM5391 THRU SM5399 DC COMPONENTS CO., LTD. R RECTIFIER SPECIALISTS TECHNICAL SPECIFICATIONS OF SURFACE MOUNT SILICON RECTIFIER VOLTAGE RANGE - 50 to 1000 Volts CURRENT - 1.5 Amperes FEATURES * Ideal for surface mounted applications * Low leakage current * Glass passivated junction SM-1(DO-213AB) MECHANICAL DATA .205(5.2) .190(4.8) * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Terminals: Solder plated solderable per MIL-STD-202E, Method 208 guaranteed * Polarity: Color band denotes cathode end * Mounting position: Any * Weight: 0.12 gram SOLDERABLE ENDS .028(.60) .018(.46) .106(2.7) .095(2.4) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) SYMBOL SM5391 SM5392 SM5393 SM5395 SM5397 SM5398 SM5399 UNITS Volts 50 100 200 400 600 800 1000 Maximum Recurrent Peak Reverse Voltage VRRM Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Volts Maximum DC Blocking Voltage o Maximum Average Forward Rectified Current T A = 75 C Peak Forward Surge Current I FM(surge): 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum Forward Voltage at 1.5A DC Maximum DC Reverse Current at Rated DC Blocking Voltage @T A = 25 o C o IO 1.5 Amps I FSM 50 Amps VF 1.4 Volts IR @T A = 125 C 5.0 100 Typical Thermal Resistance (Note 2) RθJC 60 Typical Junction Capacitance (Note 1) CJ 30 T J , T STG -65 to +150 Operating and Storage Temperature Range NOTES : 1. Measured at 1.0 MHz and applied reverse voltage of 4.0VDC 2. Thermal resistance (Junction to Ambient),.24in2 (6.0mm2 ) coppeer pads to each terminal. µAmps o C/ W pF o C RATING AND CHARACTERISTIC CURVES (SM5391 THRU SM5399) DC COMPONENTS CO., LTD. R