DYNEX SV2014K

SV20
SV20
Rectifier Diode
Replaces March 1998 version, DS4085-2.3
DS4085-3.0 January 2000
KEY PARAMETERS
VRRM
2000V
IF(AV)
220A
IFSM
4000A
APPLICATIONS
■ Rectification
■ Freewheel Diode
■ DC Motor Control
■ Power Supplies
■ Welding
■ Battery Chargers
FEATURES
■ High Surge Capability
VOLTAGE RATINGS
Type Number
Repetitive Peak
Reverse Voltage
VRRM
V
SV20 20 M or K(R)
SV20 14 M or K(R)
SV20 10 M or K(R)
SV20 06 M or K(R)
2000
1400
1000
600
Conditions
VRSM = VRRM + 100V
Lower voltage grades available.
M for M12 thread. K for 1/2" - 20UNF thread, R for reverse
polarity.
Add C to type number for DO8C package.
Outline type codes: DO8C and DO8
See Package Details for further information.
CURRENT RATINGS
Symbol
Parameter
Conditions
Max.
Units
Single Side Cooled
IF(AV)
Mean forward current
Half wave resistive load, Tcase = 100oC
220
A
IF(RMS)
RMS value
Tcase = 100oC
350
A
Continuous (direct) forward current
Tcase = 100oC
297
A
IF
1/7
SV20
SURGE RATINGS
Parameter
Symbol
IFSM
I2t
IFSM
I2t
Surge (non-repetitive) forward current
I2t for fusing
Surge (non-repetitive) forward current
Conditions
Max.
Units
10ms half sine; Tcase = 175oC
3.2
kA
VR = 50% VRRM - 1/4 sine
51.2 x 103
A2s
10ms half sine; Tcase =175oC
4.0
kA
VR = 0
80.0 x 103
A2s
I2t for fusing
THERMAL AND MECHANICAL DATA
Symbol
Conditions
Parameter
Min.
Max.
Units
Rth(j-c)
Thermal resistance - junction to case
dc
-
0.23
o
Rth(c-h)
Thermal resistance - case to heatsink
Mounting torque 15.0Nm
with mounting compound
-
0.08
o
Forward (conducting)
-
175
o
Reverse (blocking)
-
175
o
Storage temperature range
-55
200
o
Mounting Torque
12.0
15.0
Nm
Typ.
Max.
Units
Tvj
Tstg
-
C/W
C/W
C
Virtual junction temperature
C
C
CHARACTERISTICS
Symbol
Parameter
VFM
Forward voltage
At 600A peak, Tcase = 25oC
-
1.4
V
IRRM
Peak reverse current
At VRRM, Tcase = 175oC
-
20
mA
QS
Total stored charge
200*
-
µC
IRM
Peak recovery current
70*
-
A
trr
reverse recovery time
5.5*
-
µs
VTO
rT
IF = 100A, dIRR/dt = 20A/µs, Tcase = 25˚C
Threshold voltage
At Tvj = 175˚C
-
0.8
V
Slope resistance
At Tvj = 175˚C
-
1.0
mΩ
*Typical values.
2/7
Conditions
SV20
CURVES
3/7
SV20
4/7
SV20
5/7
SV20
PACKAGE DETAILS
For further package information, please contact your local Customer Service Centre. All dimensions in mm, unless stated otherwise.
DO NOT SCALE.
Ø8.4 ± 0.3
8 min
20 max
12 ± 0.5
3.17 max
Thread M12
1/2" 20 UNF
8 min
3.17 max
Thread M12
1/2" 20 UNF
Nominal weight: 120g
Mounting torque: 15Nm ±10%
Nominal weight: 120g
Mounting torque: 15Nm ±10%
Package outine type code: DO8
Package outine type code: DO8C
ASSOCIATED PUBLICATIONS
Title
Application Note
Number
Calculating the junction temperature or power semiconductors
AN4506
Thyristor and diode measurement with a multi-meter
Use of V , r on-state characteristic
AN4853
AN5001
TO
6/7
Ø27 max
T
Type No + K - 20.6 ± 0.6
Type No + M - 18.0 ± 0.5
8 min
60 max
Ø27 max
Type No + K - 20.6 ± 0.6
Type No + M - 18.0 ± 0.5
12 ± 0.5
163 ± 10
Ø5.2 ± 0.2
SV20
POWER ASSEMBLY CAPABILITY
The Power Assembly group was set up to provide a support service for those customers requiring more than the basic semiconductor, and has developed a flexible range of heatsink / clamping systems in line with advances in device types and the voltage and
current capability of our semiconductors.
We offer an extensive range of air and liquid cooled assemblies covering the full range of circuit designs in general use today. The
Assembly group continues to offer high quality engineering support dedicated to designing new units to satisfy the growing needs of
our customers.
Using the up to date CAD methods our team of design and applications engineers aim to provide the Power Assembly Complete
solution (PACs).
HEATSINKS
Power Assembly has it’s own proprietary range of extruded aluminium heatsinks. They have been designed to optimise the
performance or our semiconductors. Data with respect to air natural, forced air and liquid cooling (with flow rates) is available on
request.
For further information on device clamps, heatsinks and assemblies, please contact your nearest Sales Representative or the
factory.
http://www.dynexsemi.com
e-mail: power_solutions@dynexsemi.com
HEADQUARTERS OPERATIONS
DYNEX SEMICONDUCTOR LTD
Doddington Road, Lincoln.
Lincolnshire. LN6 3LF. United Kingdom.
Tel: 00-44-(0)1522-500500
Fax: 00-44-(0)1522-500550
DYNEX POWER INC.
Unit 7 - 58 Antares Drive,
Nepean, Ontario, Canada K2E 7W6.
Tel: 613.723.7035
Fax: 613.723.1518
Toll Free: 1.888.33.DYNEX (39639)
CUSTOMER SERVICE CENTRES
France, Benelux, Italy and Spain Tel: +33 (0)1 69 18 90 00. Fax: +33 (0)1 64 46 54 50
North America Tel: 011-800-5554-5554. Fax: 011-800-5444-5444
UK, Germany, Scandinavia & Rest Of World Tel: +44 (0)1522 500500. Fax: +44 (0)1522 500020
SALES OFFICES
France, Benelux, Italy and Spain Tel: +33 (0)1 69 18 90 00. Fax: +33 (0)1 64 46 54 50
Germany Tel: 07351 827723
North America Tel: (613) 723-7035. Fax: (613) 723-1518. Toll Free: 1.888.33.DYNEX (39639) /
Tel: (831) 440-1988. Fax: (831) 440-1989 / Tel: (949) 733-3005. Fax: (949) 733-2986.
UK, Germany, Scandinavia & Rest Of World Tel: +44 (0)1522 500500. Fax: +44 (0)1522 500020
These offices are supported by Representatives and Distributors in many countries world-wide.
© Dynex Semiconductor 2000 Publication No. DS4085-3 Issue No. 3.0 January 2000
TECHNICAL DOCUMENTATION – NOT FOR RESALE. PRINTED IN UNITED KINGDOM
Datasheet Annotations:
Dynex Semiconductor annotate datasheets in the top right hard corner of the front page, to indicate product status. The annotations are as follows:Target Information: This is the most tentative form of information and represents a very preliminary specification. No actual design work on the product has been started.
Preliminary Information: The product is in design and development. The datasheet represents the product as it is understood but details may change.
Advance Information: The product design is complete and final characterisation for volume production is well in hand.
No Annotation: The product parameters are fixed and the product is available to datasheet specification.
This publication is issued to provide information only which (unless agreed by the Company in writing) may not be used, applied or reproduced for any purpose nor form part of any order or contract nor to be regarded as
a representation relating to the products or services concerned. No warranty or guarantee express or implied is made regarding the capability, performance or suitability of any product or service. The Company reserves
the right to alter without prior notice the specification, design or price of any product or service. Information concerning possible methods of use is provided as a guide only and does not constitute any guarantee that such
methods of use will be satisfactory in a specific piece of equipment. It is the user's responsibility to fully determine the performance and suitability of any equipment using such information and to ensure that any publication
or data used is up to date and has not been superseded. These products are not suitable for use in any medical products whose failure to perform may result in significant injury
or death to the user. All products and materials are sold and services provided subject to the Company's conditions of sale, which are available on request.
All brand names and product names used in this publication are trademarks, registered trademarks or trade names of their respective owners.
7/7