TI SN7534051

SN7534050, SN7534051
DUAL DIFFERENTIAL DRIVERS AND RECEIVERS
www.ti.com
SLLS833 – MAY 2007
FEATURES
•
•
•
Meet or Exceed Standards TIA/EIA-422-B and
ITU Recommendation V.11
Operate From Single 5-V Power Supply
Driver Positive and Negative Current Limiting
SN7534050...N OR NS PACKAGE
(TOP VIEW)
1B
1
VCC
•
•
•
•
Receiver Input Sensitivity: ±200mV
Receiver Input Impedance: 12 kΩ Min
Driver 3-State Outputs
Receiver 3-State Outputs (SN7534050 Only)
SN7534051...N OR NS PACKAGE
(TOP VIEW)
1B
1
VCC
1Y
1A
2
16
15
1D
1A
2
16
15
1R
3
14
1Y
1R
3
14
RE
4
13
1Z
1DE
4
13
1Z
2R
5
12
DE
2R
5
12
2DE
2A
6
11
2Z
2A
6
11
2Z
2B
7
10
2Y
2B
7
10
2Y
GND
8
9
2D
GND
8
9
2D
1D
DESCRIPTION/ORDERING INFORMATION
The SN7534050 and SN7534051 dual differential drivers and receivers are monolithic integrated circuits
designed to meet the requirements of ANSI standards TIA/EIA-422-B and ITU Recommendations V.11.
The driver outputs provide limiting for both positive and negative currents and thermal shutdown protection from
line fault conditions on transmission bus line.
The SN7534050 combines dual 3-state differential drivers and dual 3-state differential input receivers. The
drivers and receivers have active-high and active-low enables, respectively which can be externally connected
together to function as direction control. SN7534051 drivers each have an individual active-high enable.
ORDERING INFORMATION
PACKAGE (1) (2)
TA
PDIP – N
SOP – NS
–20°C to 85°C
PDIP – N
SOP – NS
(1)
(2)
ORDERABLE PART NUMBER
TOP-SIDE MARKING
Tube of 25
SN7534050N
SN7534050N
Reel of 1000
SN7534050NS
SN7534050
Reel of 2000
SN7534050NSR
SN7534050
Tube of 25
SN7534051N
SN7534051N
Reel of 1000
SN7534051NS
SN7534051
Reel of 2000
SN7534051NSR
SN7534051
Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
website at www.ti.com.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2007, Texas Instruments Incorporated
SN7534050, SN7534051
DUAL DIFFERENTIAL DRIVERS AND RECEIVERS
www.ti.com
SLLS833 – MAY 2007
FUNCTION TABLES
SN7534050, SN7534051
Each Driver (1)
OUTPUTS
INPUT
D
ENABLE
DE
H
H
H
L
L
H
L
H
X
L
Z
Z
(1)
Y
Z
H = high level, L = low level,
X = irrelevant, Z = high
impedance (off)
SN7534050
Each Receiver (1)
(1)
DIFFERENTIAL
INPUTS,
A–B
ENABLE
RE
OUTPUT
R
VID ≥ 0.2 V
L
H
–0.2 V < VID < 0.2 V
L
?
VID ≤ – 0.2 V
L
L
X
H
Z
H = high level, L = low level, ? = indeterminate, X = irrelevant,
Z = high impedance (off)
SN7534051
Each Receiver (1)
OUTPUT
R
VID ≥ 0.2 V
H
–0.2 V < VID < 0.2 V
?
VID ≤ – 0.2 V
L
(1)
2
DIFFERENTIAL
INPUTS,
A–B
H = high level, L = low level,
? = indeterminate
Submit Documentation Feedback
SN7534050, SN7534051
DUAL DIFFERENTIAL DRIVERS AND RECEIVERS
www.ti.com
SLLS833 – MAY 2007
LOGIC DIAGRAMS
SN7534050
SN7534051
12
1DE
DE
4
14
1Y
13
1Z
2
1A
1
1B
10
2Y
11
2Z
6
2A
7
2B
15
1D
4
RE
3
15
1D
3
2
1
9
10
11
5
6
7
1R
2D
2R
1R
14
13
1Y
1Z
2DE
2D
1A
1B
12
9
5
2R
2Y
2Z
2A
2B
SCHEMATIC OF INPUTS
EQUIVALENT OF DRIVER OR ENABLE INPUT
VCC
EQUIVALENT OF RECEIVER INPUT
VCC
R(eq)
Input
16.8 kΩ
NOM
960 Ω
NOM
Input
960 Ω
NOM
Driver input: R(eq) = 6 kΩ nom
Enable input: R(eq) = 4 kΩ nom
R(eq) = equivalent resistor
All resistor values are nominal.
Submit Documentation Feedback
3
SN7534050, SN7534051
DUAL DIFFERENTIAL DRIVERS AND RECEIVERS
www.ti.com
SLLS833 – MAY 2007
SCHEMATIC OF OUTPUTS
TYPICAL OF ALL DRIVER OUTPUTS
TYPICAL OF ALL RECEIVER OUTPUTS
VCC
VCC
85 Ω
Nom
Output
Output
GND
All resistor values are nominal.
Absolute Maximum Ratings (1)
over operating free-air temperature range (unless otherwise noted)
MIN
VCC
Supply voltage (2)
VI
Input voltage
DE, RE, D inputs
Vi
Receiver input voltage
A or B inputs
VID
Receiver differential output voltage (3)
VO
Driver output voltage range
IOL
Receiver low-level output current
θJA
Package thermal impedance (4)
Tstg
–10
(2)
(3)
(4)
4
UNIT
7
V
7
V
±25
V
±25
V
15
V
50
mA
N package
66
NS package
68
°C/W
Operating free-air temperature range
–20
85
°C
Storage temperature range
–65
150
°C
260
°C
Lead temperature, 1.6 mm (1/16 in) from case for 10 s
(1)
MAX
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
All voltages, except differential input voltage, are with respect to the network GND.
Differential input voltage is measured at the noninverting terminal, with respect to the inverting terminal.
The package thermal impedance is calculated in accordance with JESD 51, except for through-hole packages, which use a trace length
of zero.
Submit Documentation Feedback
SN7534050, SN7534051
DUAL DIFFERENTIAL DRIVERS AND RECEIVERS
www.ti.com
SLLS833 – MAY 2007
Recommended Operating Conditions
VCC
Supply voltage
VIH
High-level input voltage
VIL
Low-level input voltage
voltage (1)
VIC
Common-mode input
VID
Differential input voltage
IOH
High-level output current
IOL
Low-level output current
TA
Operating free-air temperature
(1)
MIN
NOM
4.75
5
MAX
UNIT
V5.25
2
DE, RE, D
V
0.8
V
Receiver
±7
V
Receiver
±12
V
40
mA
–400
µA
Driver
Receiver
Driver
–40
Receiver
mA
16
–20
°C
85
Refer to TIA/EIA-422-B for exact conditions.
DRIVER SECTION
Electrical Characteristics
over recommended supply voltage and operating free-air temperature range (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN
TYP (1)
MAX
UNIT
VOH
High-level output voltage
VIH = 2 V, VIL = 0.8 V, IOH = –20 mA
3.7
V
VOL
Low-level output voltage
VIH = 2 V, VIL = 0.8 V, IOL = 20 mA
1.1
V
VOD1
Differential output voltage
IO = 0 mA
VOD2
Differential output voltage (2)
RL = 100 Ω,
See Figure 1
∆VOD
Change in magnitude of
differential output voltage (2)
RL = 100 Ω,
See Figure 1
±0.4
V
VOC
Common-mode output voltage (2)
RL = 100 Ω,
See Figure 1
±3
V
∆VOC
Change in magnitude of
differential common-mode voltage (2)
RL = 100 Ω,
See Figure 1
±0.4
V
Ioff
Output current with power off (2)
VCC = 0 V
IOZ
High-impedance-state output current
VO = –0.25 V to 6 V
IIH
High-level input current
IIL
Low-level input current
IOS
Short-circuit output current (2) (3)
VO = VCC or GND
ICC
Supply current (total package)
No load
(1)
(2)
(3)
1.5
6
2
V
V
VO = 6 V
100
VO = –0.25 V
–100
µA
±100
µA
VI = 2.7 V
20
µA
VI = 0.4 V
–100
µA
–150
mA
–30
Output enabled
80
110
Output disabled
50
80
mA
All typical values are at VCC = 5 V and TA = 25°C.
Refer to TIA-EIA-422-B for exact conditions.
Not more than one output should be shorted at a time, and the duration of the short circuit should not exceed one second.
Submit Documentation Feedback
5
SN7534050, SN7534051
DUAL DIFFERENTIAL DRIVERS AND RECEIVERS
www.ti.com
SLLS833 – MAY 2007
Switching Characteristics
VCC = 5 V, CL = 50 pF, TA = 25°C
TYP
MAX
td(OD)
Differential output delay time
PARAMETER
RL = 100 Ω, CL = 50 pF, See Figure 3
TEST CONDITIONS
MIN
20
25
UNIT
ns
tt(OD)
Differential output transition time
RL = 100 Ω, CL = 50 pF, See Figure 3
27
35
ns
tPLH
Propagation delay time, low- to high-level output
RL = 27 Ω, See Figure 4
20
25
ns
tPHL
Propagation delay time, high- to low-level output
RL = 27 Ω, See Figure 4
20
25
ns
tPZH
Output enable time to high level
RL = 110 Ω, See Figure 5
80
120
ns
tPZL
Output enable time to low level
RL = 110 Ω, See Figure 6
40
60
ns
tPHZ
Output disable time from high level
RL = 110 Ω, See Figure 5
90
120
ns
tPLZ
Output disable time from low level
RL = 110 Ω, See Figure 6
30
45
ns
TYP (1)
MAX
RECEIVER SECTION
Electrical Characteristics
over operating free-air temperature range (unless otherwise noted)
PARAMETER
TEST CONDITIONS
VIT+
Positive-going input threshold voltage, differential input
VIT–
Negative-going input threshold voltage, differential
input
Vhys
Input hysteresis (VIT+ – VIT–)
VIK
Input clamp voltage, RE
VOH
High-level output voltage
VID = 200 mV,
IOH = –400 µA,
VOL
Low-level output voltage
VID = –200 mV,
See Figure 2
IOZ
High-impedance-state output current
MIN
0.2
–0.2 (2)
50
mV
–1.5
2.7
IOL = 8 mA
0.45
IOL = 16 mA
0.5
±20
VI = 10 V
1.5
VI = –10 V
–2.5
II
Line input current
IIH
High-level enable input current, RE
SN7534050 VIH = 2.7 V
20
IIL
Low-level enable input current, RE
SN7534050 VIL = 0.4 V
–100
rI
Input resistance
IOS
Short circuit output current
ICC
Supply current (total package)
(1)
(2)
12
V
µA
mA
µA
µA
kΩ
–15
No load, enabled
V
V
SN7534050 VO = 0.4 V to 2.4 V
Other input at 0 V
V
V
SN7534050 II = –18 mA
See Figure 2
UNIT
80
–85
mA
110
mA
All typical values are at VCC = 5 V and TA = 25°C.
The algebraic convention, where the less positive (more negative) limit is designated as minimum, is used in this data sheet for
common-mode input voltage and threshold voltage levels.
Switching Characteristics
over operating free-air temperature range (unless otherwise noted)
PARAMETER
6
TEST CONDITIONS
MIN
TYP
MAX
UNIT
20
35
ns
tPLH
Propagation delay time, low- to high-level output
VID = 1.5 V, CL = 15 pF,
See Figure 7
tPHL
Propagation delay time, high- to low-level output
VID = 1.5 V, CL = 15 pF,
See Figure 7
22
35
ns
tPZH
Output enable time to high level
SN7534050
CL = 15 pF, see Figure 8
17
25
ns
tPZL
Output enable time to low level
SN7534050
CL = 15 pF, See Figure 8
20
27
ns
tPHZ
Output disable time from high level
SN7534050
CL = 15 pF, See Figure 8
25
40
ns
tPLZ
Output disable time from low level
SN7534050
CL = 15 pF, See Figure 8
30
40
ns
Submit Documentation Feedback
SN7534050, SN7534051
DUAL DIFFERENTIAL DRIVERS AND RECEIVERS
www.ti.com
SLLS833 – MAY 2007
PARAMETER MEASUREMENT INFORMATION
RL
2
VOD2
RL
VOC
2
Figure 1. Driver Test Circuit,
VOD and VOC
VID
IOH
VOH
VOL
IOL
Figure 2. Receiver Test Circuit,
VOH and VOL
3V
Input
(see Note A)
Y
Input
(see Note B)
RL
CL = 50 pF
Output
(see Note A)
1.5 V
1.5 V
0V
td(OD)
td(OD)
Differential
Output
Z
TEST CIRCUIT
50%
10%
90%
90%
50%
10%
tt(OD)
~
~ 2.5 V
~
~ –2.5 V
tt(OD)
VOLTAGE WAVEFORMS
A.
CL includes probe and jig capacitance.
B.
The pulse generator has the following characteristics: PRR ≤ 1 MHz, duty cycle = 50%, tr = tr≤ 6 ns.
Figure 3. Driver Test Circuit and Voltage Waveforms,
td(OD) and tt(OD)
Submit Documentation Feedback
7
SN7534050, SN7534051
DUAL DIFFERENTIAL DRIVERS AND RECEIVERS
www.ti.com
SLLS833 – MAY 2007
PARAMETER MEASUREMENT INFORMATION (continued)
3V
2.3 V
1.5 V
Input
(see Note A)
0V
tPHL
tPLH
RL = 27 Ω
2.3 V
VOH
2.3 V
VOL
Y
Output
Input
(see Note B)
1.5 V
Z
CL = 50 pF
2.3 V
(see Note A)
VOL
tPLH
tPHL
TEST CIRCUIT
VOH
2.3 V
VOLTAGE WAVEFORMS
A.
CL includes probe and jig capacitance.
B.
The pulse generator has the following characteristics: PRR ≤ 1 MHz, duty cycle = 50%, tr = tr≤ 6 ns.
Figure 4. Driver Test Circuit and Voltage Waveforms,
tPLH and tPHL
3V
Output
0 V or 3 V
1.5 V
Input DE
1.5 V
0V
CL = 50 pF
Pulse
Generator
DE
(see Note B)
50 Ω
tPZH
RL = 110 Ω
(see Note A)
tPHZ
VOH
2.3 V
Output
0.5 V
GND
VOLTAGE WAVEFORMS
TEST CIRCUIT
A.
CL includes probe and jig capacitance.
B.
The pulse generator has the following characteristics: PRR ≤ 1 MHz, duty cycle = 50%, tr = tr≤ 6 ns.
Figure 5. Driver Test Circuit and Voltage Waveforms,
tPZH and tPHZ
5V
RL = 110 Ω
Output
0 V or 3 V
Pulse
Generator
(see Note B)
3V
1.5 V
0V
tPZL
CL = 50 pF
DE
1.5 V
Input DE
tPLZ
5V
(see Note A)
Output
2.3 V
50 Ω
VOL
0.5 V
VOLTAGE WAVEFORMS
TEST CIRCUIT
A.
CL includes probe and jig capacitance.
B.
The pulse generator has the following characteristics: PRR ≤ 1 MHz, duty cycle = 50%, tr = tr≤ 6 ns.
Figure 6. Driver Test Circuit and Voltage Waveforms,
tPZL and tPLZ
8
Submit Documentation Feedback
SN7534050, SN7534051
DUAL DIFFERENTIAL DRIVERS AND RECEIVERS
www.ti.com
SLLS833 – MAY 2007
PARAMETER MEASUREMENT INFORMATION (continued)
1.5 V
Pulse
Generator
0V
Input
(see Note B)
0V
–1.5 V
tPLH
50 Ω
tPHL
CL = 15 pF
0V
(see Note A)
1.3 V
Output
TEST CIRCUIT
VOH
1.3 V
VOL
VOLTAGE WAVEFORMS
A.
CL includes probe and jig capacitance.
B.
The pulse generator has the following characteristics: PRR ≤ 1 MHz, duty cycle = 50%, tr = tr≤ 6 ns.
Figure 7. Receiver Test Circuit and Voltage Waveforms,
tPLH and tPHL
1.5 V
S1
S2
2 kΩ
5V
–1.5 V
CL = 15 pF
(see Note A)
Generator
(see Note B)
5 kΩ
1N916 or Equivalent
50 Ω
S3
TEST CIRCUIT
3V
1.5 V
0V
Input
tPZH
Output
VOH
Input
S1 to 1.5 V
S3 Closed
S2 Open
tPZL
Output
1.5 V
3V
1.5 V
0V
S1 to –1.5 V
~
~4.5 V S3 Closed
1.5 V S2 Open
VOL
0V
3V
3V
1.5 V
Input
0V
tPHZ
Output
VOH
Input
S1 to 1.5 V
S2 Closed
S3 Closed
1.5 V
tPLZ
Output
0.5 V
~
~ 1.3 V
0.5 V
0V
S1 to –1.5 V
~
~1.3 V S3 Closed
S2 Closed
VOL
VOLTAGE WAVEFORMS
A.
CL includes probe and jig capacitance.
B.
The pulse generator has the following characteristics: PRR ≤ 1 MHz, duty cycle = 50%, tr = tr≤ 6 ns.
Figure 8. Receiver Test Circuit and Voltage Waveforms,
tPZH, tPZL, tPHZ, tPLZ (SN7534050)
Submit Documentation Feedback
9
PACKAGE OPTION ADDENDUM
www.ti.com
4-Jun-2007
PACKAGING INFORMATION
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
SN7534050N
ACTIVE
PDIP
N
16
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
SN7534050NE4
ACTIVE
PDIP
N
16
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
SN7534050NS
ACTIVE
SO
NS
16
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN7534050NSE4
ACTIVE
SO
NS
16
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN7534050NSG4
ACTIVE
SO
NS
16
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN7534050NSR
ACTIVE
SO
NS
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN7534050NSRE4
ACTIVE
SO
NS
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN7534050NSRG4
ACTIVE
SO
NS
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN7534051N
ACTIVE
PDIP
N
16
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
SN7534051NE4
ACTIVE
PDIP
N
16
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
SN7534051NS
ACTIVE
SO
NS
16
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN7534051NSE4
ACTIVE
SO
NS
16
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN7534051NSG4
ACTIVE
SO
NS
16
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN7534051NSR
ACTIVE
SO
NS
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN7534051NSRE4
ACTIVE
SO
NS
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN7534051NSRG4
ACTIVE
SO
NS
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
Lead/Ball Finish
MSL Peak Temp (3)
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
4-Jun-2007
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
4-Oct-2007
TAPE AND REEL BOX INFORMATION
Device
Package Pins
Site
Reel
Diameter
(mm)
Reel
Width
(mm)
A0 (mm)
B0 (mm)
K0 (mm)
P1
(mm)
W
Pin1
(mm) Quadrant
SN7534050NSR
NS
16
SITE 41
330
16
8.2
10.5
2.5
12
16
Q1
SN7534051NSR
NS
16
SITE 41
330
16
8.2
10.5
2.5
12
16
Q1
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
4-Oct-2007
Device
Package
Pins
Site
Length (mm)
Width (mm)
Height (mm)
SN7534050NSR
NS
16
SITE 41
346.0
346.0
33.0
SN7534051NSR
NS
16
SITE 41
346.0
346.0
33.0
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements,
improvements, and other changes to its products and services at any time and to discontinue any product or service without notice.
Customers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s
standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this
warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily
performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should
provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask
work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services
are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such
products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under
the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is
accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an
unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties
may be subject to additional restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service
voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business
practice. TI is not responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would
reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement
specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications
of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related
requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any
applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its
representatives against any damages arising out of the use of TI products in such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is
solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in
connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products
are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any
non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Applications
Amplifiers
amplifier.ti.com
Audio
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DSP
dsp.ti.com
Broadband
www.ti.com/broadband
Interface
interface.ti.com
Digital Control
www.ti.com/digitalcontrol
Logic
logic.ti.com
Military
www.ti.com/military
Power Mgmt
power.ti.com
Optical Networking
www.ti.com/opticalnetwork
Microcontrollers
microcontroller.ti.com
Security
www.ti.com/security
RFID
www.ti-rfid.com
Telephony
www.ti.com/telephony
Low Power
Wireless
www.ti.com/lpw
Video & Imaging
www.ti.com/video
Wireless
www.ti.com/wireless
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2007, Texas Instruments Incorporated