R1200F THRU R2500F HIGH VOLTAGE FAST RECOVERY RECTIFIERS VOLTAGE RANGE 1200 to 2500 Volts CURRENT 500 & 200 m Ampere FEATURES * Low forward voltage drop * High current capability * High reliability * High surge current capability DO-41 .107(2.7) .080(2.0) DIA. 1.0(25.4) MIN. MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Lead: Axial leads, solderable per MIL-STD-202, method 208 guranteed * Polarity: Color band denotes cathode end * Mounting position: Any * Weight: 0.34 grams .205(5.2) .166(4.2) 1.0(25.4) MIN. .034(.9) .028(.7) DIA. Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25 C ambient temperature uniess otherwies specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. TYPE NUMBER Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current R1200F 1200 840 1200 .375"(9.5mm) Lead Length at Ta=50 C Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage at 0.5A/0.2A D.C. Maximum DC Reverse Current Ta=25 C at Rated DC Blocking Voltage Ta=100 C Maximum Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Operating and Storage Temperature Range TJ, TSTG NOTES: 1. Reverse Recovery Time test condition: IF=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1MHz and applied reverse voltage of 4.0V D.C. R1500F R1600F 1500 1050 1500 R1800F 1600 1120 1600 1800 1260 1800 500 R2000F R2500F UNITS 2000 1400 2000 2500 1750 2500 200 mA 3.0 A V mA 30 2.0 5.0 100 500 40 -65 +175 V V V mA nS pF C RATING AND CHARACTERISTIC CURVES (R1200F THRU R2500F) FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE FIG.1 - TYPICAL REVERSE AVERAGE FORWARD CURRENT,(mA) CHARACTERISTICS 10 Tj=100 C 1.0 600 Single Phase 500 Half Wave 60Hz Resistive Or Inductive Load 400 0.375"(9.5mm) Lead Length 300 R1 20 200 0F~R 20 40 60 80 ~R 00 F 2500 100 0 0 0F 18 R200 100 F 120 140 160 180 200 AMBIENT TEMPERATURE ( C) Tj=25 C .01 0 20 40 60 80 FIG.4-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT,(A) .1 100 120 140 PERCENTAGE RATED PEAK REVERSE VOLTAGE FIG.3- TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTICS 50W NONINDUCTIVE 10W NONINDUCTIVE 30 24 18 8.3ms Single Half Tj=25 C Sine Wave 12 JEDEC method 6 0 1 ( ) (+) D.U.T. 25Vdc (approx.) 5 PULSE GENERATOR (NOTE 2) ( ) 50 10 100 NUMBER OF CYCLES AT 60Hz (+) 1W NONINDUCTIVE OSCILLISCOPE (NOTE 1) FIG.5-TYPICAL JUNCTION CAPACITANCE NOTES: 1. Rise Time= 7ns max., Input Impedance= 1 megohm.22pF. 2. Rise Time= 10ns max., Source Impedance= 50 ohms. trr | | | | | | | | +0.5A 0 140 JUNCTION CAPACITANCE,(pF) REVERSE LEAKAGE CURRENT, (mA) 100 -0.25A 120 100 80 60 40 20 0 -1.0A 1cm SET TIME BASE FOR 50 / 10ns / cm .01 .05 .1 .5 1 REVERSE VOLTAGE,(V) 5 10 50 100