2KBPOO5G Thru 2KBP10G 2 AMP GLASS PASSIVATED SILICON BRIDGE RECTIFIER FEATURES Rating to IOOOV PRV Surge overload rating to 65 Amperes peak Ideal for printed circuit board Reliable low cost construction utilizing molded plastic technique results in inexpensive product UL recognized: File #El06441 UL recognized 94V-0 plastic material n Outline Drawing 2KBP-G Mechanical Data Case: Molded plastic Leads: Tin plated copper Leads solderable per MIL-STD-202, Method 208 Weight: 0.05 ounce, 1.52 grams Maximum Ratings & Characteristics Ratings at 25” C ambient temperature unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load For capacitive load, derate current by 20% 7 VRRM Maximum Recurrent Peak Reverse Voltage VRMS Maximum RMS Voltage VOC Maximum DC Blocking Voltage Maximum Average Forward Q TA = 65°C ’ (Av) I I Outout Current Peak Forward Surge Current lFSM 8.3 ms Single Half-Sine-Wave Superimposed On Rated Load Maximum DC Forward Voltage Drop per Element VF At 1 .OA DC IR Maximum DC Reverse Current At Rated@ TA = 25°C DC Blocking Voltage per Element @TA= 125°C I2 t Rating for Fusing (t c 8.3ms) I2 t Typical Junction Capacitance Per Element * CJ Typical Thermal Resistance ‘* RCm J-Q Operating Temperature Range TJ Storage Temperature Range TSTG Notes: 2KBP 0056 2KBP OlG 50 100 35 60 70 100 2KBP 02G 200 140 200 2KBP 04G 400 280 400 2KBP 06G 600 420 600 2KBP 086 800 560 800 ‘,yGp U n i t s 1000 700 1000 v v v 2.0 A 65 A 1.1 V 5 500 17.5 25 14 -55 to +150 -55 to +150 *Measured at 1 .OMHZ and applied reverse voltage of 4.OV DC * Thermal resistance junction to case l Collmer Semiconductor, Inc. - P.O. Box 702708 - Dallas, TX 75370 - 972-733-1700 - http://www.collmer.com CLA A2 S PF “CMI “C “C