GBJ15005 ~ GBJ1510 Voltage 50V ~ 1000V 15.0 Amp Glass Passivited Bridge Rectifiers Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free GBJ FEATURES Rating to 1000V PRV Ideal for printed circuit board Low forward voltage drop, high current capability Reliable low cost construction utilizing molded plastic technique results in inexpensive product The plastic material has Underwriters Laboratory flammability classification 94V-0 REF. A B C D E F G H I Millimeter Min. Max. 29.7 30.3 19.7 20.3 4.4 4.8 17.0 18.0 3.0 x 45° 3.1 3.4 5.1 2.5 2.9 0.9 1.1 REF. J K L M N P Q R S Millimeter Min. Max. 0.6 0.8 7.3 7.7 2.0 2.4 9.8 10.2 2.3 2.7 3.6 4.2 10.8 11.2 3.1 3.4 3.4 3.8 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Rating 25°C ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, de-rate current by 20%.) Part Number Parameter Symbol GBJ 15005 GBJ 1501 GBJ 1502 GBJ 1504 GBJ 1506 GBJ 1508 GBJ 1510 Unit Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V Maximum DC Blocking Voltage Maximum Average Forward (with heat sink) 2 Rectified Current @TC=100°C (without heat sink) Peak Forward Surge Current 8.3 ms Single Half Sine-Wave Super Imposed on Rated Load (JEDEC Method) Maximum Forward Voltage @ 7.5A DC Maximum DC Reverse Current at Rated DC Blocking Voltage 15 I(AV) IFSM 240 A VF 1.1 V TJ=25°C TJ=125°C 2 I t Rating for Fusing (t<8.3ms) Typical Junction Capacitance Per Element Typical Thermal Resistance Operating and Storage temperature range 1 A 3.2 10 IR µA 500 It 2 240 As 2 CJ 60 pF RθJC 0.8 °C/W TJ,TSTG -55~150 °C Notes： 1. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 2. Device mounted on 300mm*300mm*1.6mm Cu plate heat sink. http://www.SeCoSGmbH.com/ 19-Oct-2011 Rev. A Any changes of specification will not be informed individually. Page 1 of 2 GBJ15005 ~ GBJ1510 Elektronische Bauelemente Voltage 50V ~ 1000V 15.0 Amp Glass Passivited Bridge Rectifiers RATINGS AND CHARACTERISTIC CURVES http://www.SeCoSGmbH.com/ 19-Oct-2011 Rev. A Any changes of specification will not be informed individually. Page 2 of 2