GOOD-ARK BHT18

BHT18
ELECTRONIC LAMP BALLASTS RECTIFIER
Reverse Voltage - 1100 Volts
Forward Current - 1.0 Ampere
Features
The plastic package carries Underwriters Laboratory
Flammability Classification 94V-0
Construction utilizes void-free molded plastic technique
Low reverse leakage
High forward surge current capability
High temperature soldering guaranteed:
250 /10 seconds, 0.375” (9.5mm) lead length,
5 lbs. (2.3Kg) tension
Mechanical Data
DIM ENSIONS
Case: DO-41 molded plastic body
Terminals: Plated axial leads, solderable per
MIL-STD-750, method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.012 ounce, 0.33 gram
DIM
inches
Max.
Min.
Max.
A
0.165
0.205
4.2
5.2
B
0.079
0.106
2.0
2.7
C
0.028
0.034
0.71
0.86
D
1.000
-
25.40
-
Maximum Ratings and Electrical Characteristics
Ratings at 25
ambient temperature unless otherwise specified.
Symbols
BHT18
Units
Maximum repetitive peak reverse voltage
VRRM
1100
Volts
Maximum RMS voltage
VRMS
770
Volts
Maximum DC blocking voltage
VDC
1100
Volts
Maximum average forward rectified current
0.375" (9.5mm) lead length at TA=75
I(AV)
1.0
Amp
Peak forward surge current
8.3mS single half sine-wave superimposed
on rated load (MIL-STD-750D 4066 method)
IFSM
30.0
Amps
Maximum instantaneous forward voltage at 1.0A
VF
1.0
Volts
IR(AV)
30.0
A
IR
1.0
30.0
A
Typical reverse recovery time (Note 1)
Trr
30.0
S
Typical junction capacitance (Note 2)
CJ
15.0
F
50.0
25.0
/W
Maximum full load reverse current, full cycle
average 0.375" (9.5mm) lead length at TA=75
Maximum DC reverse current
at rated DC blocking voltage
TA=25
TA=100
Typical thermal resistance (Note 3)
Operating junction and storage temperature range
R
R
JA
JL
TJ, TSTG
-50 to +175
Notes:
(1) Measured on Tektronix Type “S” recovery plug-in. Tektronix 545 Scope or equivalent, IFM=20mA, IRM=1mA
(2) Measured at 1.0MHz and applied reverse voltage of 4.0 volts
(3) Thermal resistance from junction to ambient and from junction to lead at 0.375” (9.5mm) lead length, P.C.B. mounted
1
mm
Min.
Note
RATINGS AND CHARACTERISTIC CURVES
2