1N4001G THRU 1N4007G, BY133G GLASS PASSIVATED JUNCTION RECTIFIER Reverse Voltage - 50 to 1300 Volts Forward Current - 1.0 Ampere Features Plastic package has Underwriters Laboratory Flammability Classification 94V-0 High temperature metallurgically bonded construction Glass passivated cavity-free junction Capable of meeting environmental standards of MIL-S-19500 1.0 ampere operation at TA=75 with no thermal runaway Typical IR less than 0.1 A High temperature soldering guaranteed: 350 /10 seconds, 0.375 (9.5mm) lead length, 5 lbs. (2.3Kg) tension Mechanical Data DIM ENSIONS Case: DO-41 molded plastic over glass body Terminals: Plated axial leads, solderable per MIL-STD-750, method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.012 ounce, 0.335 gram inches DIM mm Min. Max. Min. Max. A 0.165 0.205 4.2 5.2 B 0.079 0.106 2.0 2.7 C 0.028 0.034 0.71 0.86 D 1.000 - 25.40 - Note Maximum Ratings and Electrical Characteristics Ratings at 25 ambient temperature unless otherwise specified. Symbols 1N 4001G 1N 4002G 1N 4003G 1N 4004G 1N 4005G 1N 4006G 1N 4007G BY 133G Units Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 1300 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 910 Volts Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 1300 Volts Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=75 I(AV) 1.0 Amp Peak forward surge current 8.3mS single half sine-wave superimposed on rated load (MIL-STD-750D 4066 method) IFSM 30.0 Amps Maximum instantaneous forward voltage at 1.0A VF 1.1 Volts IR 5.0 50.0 A Typical reverse recovery time (Note 1) Trr 2.0 S Typical junction capacitance (Note 2) CJ 8.0 F 55.0 25.0 /W Maximum DC reverse current at rated DC blocking voltage TA=25 TA=125 Typical thermal resistance (Note 3) Operating junction and storage temperature range R R JA JL TJ, TSTG -65 to +175 Notes: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0MHz and applied reverse voltage of 4.0 volts (3) Thermal resistance from junction to ambient at 0.375 (9.5mm) lead length, P.C.B. mounted 1 RATINGS AND CHARACTERISTIC CURVES 2