TL5580, TL5580A DUAL LOW-NOISE WIDE-BANDWIDTH PRECISION AMPLIFIER www.ti.com SLOS477A – JUNE 2005 – REVISED JULY 2005 FEATURES APPLICATIONS • • • • • • • • • • • • Operating Voltage…±2 V to ±18 V Low Offset Voltage…1 mV Max at 25°C, TL5580A Wide GBW…12 MHz Typ Slew Rate…5 V/µs Typ Low THD…0.0005% Typ Low-Noise Voltage…7 nV/√Hz at 1 kHz Typ Audio Test Equipment Industrial Process Controls Data-Acquisition Systems Active Filters Power-Supply Regulation D, P, OR PW PACKAGE (TOP VIEW) 1OUT 1IN− 1IN+ VCC− 1 8 2 7 3 6 4 5 VCC+ 2OUT 2IN− 2IN+ DESCRIPTION/ORDERING INFORMATION The TL5580 is a dual bipolar operational amplifier that combines both high dc and ac performance with its low offset voltage, high-gain bandwidth, low harmonic distortion, and low-noise characteristics. In addition, its output is capable of driving 600-Ω loads. All these characteristics make the device ideally suited for use in audio, active filtering, and industrial measurement applications. ORDERING INFORMATION TA VIO (25°C, MAX) PACKAGE (1) PDIP – P Standard grade 1.5 mV SOIC – D TSSOP – PW –40°C to 85°C PDIP – P A grade 1 mV SOIC – D TSSOP – PW (1) ORDERABLE PART NUMBER Tube of 50 TL5580IP Tube of 75 TL5580ID Reel of 2500 TL5580IDR Tube of 150 TL5580IPW Reel of 2000 TL5580IPWR Tube of 50 TL5580AIP Tube of 75 TL5580AID Reel of 2500 TL5580AIDR Tube of 150 TL5580AIPW Reel of 2000 TL5580AIPWR TOP-SIDE MARKING TL5580IP Z5580 Z5580 TL5580AIP Z5580A Z5580A Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2005, Texas Instruments Incorporated TL5580, TL5580A DUAL LOW-NOISE WIDE-BANDWIDTH PRECISION AMPLIFIER www.ti.com SLOS477A – JUNE 2005 – REVISED JULY 2005 EQUIVALENT SCHEMATIC VCC+ Output − Input + Input VCC− 2 TL5580, TL5580A DUAL LOW-NOISE WIDE-BANDWIDTH PRECISION AMPLIFIER www.ti.com SLOS477A – JUNE 2005 – REVISED JULY 2005 Absolute Maximum Ratings (1) over operating free-air temperature range (unless otherwise noted) MAX UNIT VCC± Supply voltage MIN ±18 V VI Input voltage (any input) ±15 V VID Differential input voltage ±30 V IO Output current ±50 mA D package θJA Package thermal impedance (2) (3) 97 P package 85 PW package TJ Operating virtual junction temperature Tstg Storage temperature range (1) (2) (3) °C/W 149 –60 150 °C 125 °C Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) – TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability. The package thermal impedance is calculated in accordance with JESD 51-7. Recommended Operating Conditions VCC+ VCC– TA Supply voltage Operating free-air temperature MIN MAX 2 16 –2 –16 –40 85 UNIT V °C 3 TL5580, TL5580A DUAL LOW-NOISE WIDE-BANDWIDTH PRECISION AMPLIFIER www.ti.com SLOS477A – JUNE 2005 – REVISED JULY 2005 Electrical Characteristics VCC± = ±15 V (unless otherwise noted) PARAMETER TEST CONDITIONS TL5580A VIO αVIO IIO Input offset current IIB Input bias current AVD Large-signal differential-voltage amplification Output voltage swing 1 0.3 1.8 25°C 5 –40°C to 85°C 100 –40°C to 85°C Common-mode input voltage range CMRR Common-mode rejection ratio RS ≤ 10 kΩ, VICR = –12 V to 12 V kSVR (1) Supply-voltage rejection ratio RS ≤ 10 kΩ ICC Supply current (all amplifiers) 25°C 90 87 12.75 – 12.25 –40°C to 85°C 12.5 –12 25°C ±13 –40°C to 85°C ±12 25°C 90 –40°C to 85°C 85 25°C 85 –40°C to 85°C 83 25°C –40°C to 85°C 75 500 800 –40°C to 85°C RL ≥ 2 kΩ 5 100 25°C RL ≥ 2 kΩ, VO = ±10 V 1.5 UNIT mV 2 –40°C to 85°C VICR (1) MAX 0.3 –40°C to 85°C 25°C VOM TYP 1.35 25°C TL5580 Average temperature coefficient of input offset voltage MIN –40°C to 85°C RS ≤ 10 kΩ Input offset voltage TA 25°C 110 µV/°C nA nA dB ±13.5 V ±13.5 V 110 dB 110 6 dB 9 12 mA Measured with VCC± varied simultaneously Operating Characteristics VCC± = ±15 V, TA = 25°C (unless otherwise noted) PARAMETER TEST CONDITIONS SR Slew rate at unity gain RL ≥ 2 kΩ GBW Gain bandwidth product f = 10 kHz THD Total harmonic distortion VO = 5 V, RL = 2 kΩ, f = 1 kHz, AVD = 20 dB Vn Equivalent input noise voltage f = 1 kHz 4 TYP UNIT 5 V/µs 12 MHz 0.0005 7 % nV/√Hz TL5580, TL5580A DUAL LOW-NOISE WIDE-BANDWIDTH PRECISION AMPLIFIER www.ti.com SLOS477A – JUNE 2005 – REVISED JULY 2005 TYPICAL CHARACTERISTICS MAXIMUM OUTPUT VOLTAGE SWING vs LOAD RESISTANCE MAXIMUM OUTPUT VOLTAGE SWING vs FREQUENCY 30 VO − Maximum Output Voltage Swing − V VO − Maximum Output Voltage Swing − V 15 VCC± = ±15 V TA = 25°C 10 VOM+ 5 0 −5 VOM− −10 25 20 15 10 −15 1k 100 V+/V− = ±15 V RL = 2 kΩ TA = 25°C 5 0 1 5 10 50 60 70 80 100 200 300 500 700 1M 10M 10k Frequency − kHz RL − Load Resistance − Ω Figure 1. Figure 2. OUTPUT VOLTAGE SWING vs OUTPUT CURRENT EQUIVALENT INPUT NOISE VOLTAGE vs FREQUENCY Vn − Equivalent Input Noise Voltage − nV/ Hz 20 VCC± = ±15 V VO − Output Voltage Swing − V 15 VOM+ 10 5 0 −5 −10 VOM− −15 −20 1 10 100 IO − Output Current − mA Figure 3. 1000 30 VCC± = ±1.5 V RS = 50 Ω AV = 60 dB TA = 25°C 20 10 0 10 100 1k Frequency − Hz 10k 100k Figure 4. 5 TL5580, TL5580A DUAL LOW-NOISE WIDE-BANDWIDTH PRECISION AMPLIFIER www.ti.com SLOS477A – JUNE 2005 – REVISED JULY 2005 TYPICAL CHARACTERISTICS (continued) OPERATING CURRENT vs TEMPERATURE OUTPUT VOLTAGE SWING vs TEMPERATURE 18 15 VCC± = ±15 V VOM+ V O − Output Voltage Swing − V ICC − Operating Current − mA 16 14 12 10 8 6 4 VCC± = 15 V RL = 2 kΩ 10 5 0 −5 −10 2 VOM− 0 −55 −15 −40 0 25 70 85 125 −55 TA − Ambient Temperature − °C 0 25 70 85 105 TA − Ambient Temperature − °C Figure 5. Figure 6. INPUT OFFSET VOLTAGE vs TEMPERATURE INPUT BIAS CURRENT vs TEMPERATURE 400 0 VCC± = ±15 V Five Representative Units VCC± = ±15 V −50 IIB − Input Bias Current − nA VIO − Input Offset Voltage − µV −40 −100 −150 −200 −250 −300 −350 −400 300 200 100 −450 −500 −40 −30 −20 −10 0 10 20 30 40 50 60 70 80 90 TA − Ambient Temperature − °C Figure 7. 6 0 −40 0 25 70 TA − Ambient Temperature − °C Figure 8. 85 TL5580, TL5580A DUAL LOW-NOISE WIDE-BANDWIDTH PRECISION AMPLIFIER www.ti.com SLOS477A – JUNE 2005 – REVISED JULY 2005 TYPICAL CHARACTERISTICS (continued) MAXIMUM OUTPUT VOLTAGE SWING vs OPERATING VOLTAGE OPERATING CURRENT vs OPERATING VOLTAGE 7 +VOM 6 10 5 0 −5 −10 5 4 3 2 −VOM 1 −15 ±5 0 0.1 ±10 ±15 0 ±0 ±20 ±2 ±4 ±8 ±10 Figure 9. Figure 10. TOTAL HARMONIC DISTORTION vs OUTPUT VOLTAGE VOLTAGE GAIN, PHASE vs FREQUENCY VCC± = ±15 V RL = 2 kΩ 40-dB Amplification TA = 25°C 40 Voltage Gain − dB 0.01 20 kHz 20 Hz 30 1 VO − Output Voltage − V Figure 11. 10 0 −30 −90 25 −120 20 −150 15 −180 10 −210 5 −240 0 0.1 ±16 −60 Phase Gain 1 kHz ±14 30 45 35 0.0001 ±12 VCC+/VCC− − Operating Voltage − V VCC± = ±15 V Gain = 20 dB RL = 2 kΩ 0.001 ±6 VCC+/VCC− − Operating Voltage − V 10k 100k 1M Frequency − Hz Phase − Deg 15 −20 THD − Total Harmonic Distortion − % TA = 25°C TA = 25°C RL = 2 kΩ ICC − Operating Current − mA V O − Maximum Output Voltage Swing − V 20 −270 10M Figure 12. 7 PACKAGE OPTION ADDENDUM www.ti.com 8-Aug-2005 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty TL5580AID ACTIVE SOIC D 8 TL5580AIDR ACTIVE SOIC D 8 TL5580AIP ACTIVE PDIP P 8 50 TL5580AIPW ACTIVE TSSOP PW 8 150 TL5580AIPWR ACTIVE TSSOP PW 8 TL5580ID ACTIVE SOIC D 8 TL5580IDR ACTIVE SOIC D 8 TL5580IP ACTIVE PDIP P 8 50 TL5580IPW ACTIVE TSSOP PW 8 150 TL5580IPWR ACTIVE TSSOP PW 8 75 Lead/Ball Finish MSL Peak Temp (3) Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Pb-Free (RoHS) CU NIPDAU Level-NC-NC-NC Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Pb-Free (RoHS) CU NIPDAU Level-NC-NC-NC Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 75 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS) or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 MECHANICAL DATA MPDI001A – JANUARY 1995 – REVISED JUNE 1999 P (R-PDIP-T8) PLASTIC DUAL-IN-LINE 0.400 (10,60) 0.355 (9,02) 8 5 0.260 (6,60) 0.240 (6,10) 1 4 0.070 (1,78) MAX 0.325 (8,26) 0.300 (7,62) 0.020 (0,51) MIN 0.015 (0,38) Gage Plane 0.200 (5,08) MAX Seating Plane 0.010 (0,25) NOM 0.125 (3,18) MIN 0.100 (2,54) 0.021 (0,53) 0.015 (0,38) 0.430 (10,92) MAX 0.010 (0,25) M 4040082/D 05/98 NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. Falls within JEDEC MS-001 For the latest package information, go to http://www.ti.com/sc/docs/package/pkg_info.htm POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 MECHANICAL DATA MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999 PW (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE 14 PINS SHOWN 0,30 0,19 0,65 14 0,10 M 8 0,15 NOM 4,50 4,30 6,60 6,20 Gage Plane 0,25 1 7 0°– 8° A 0,75 0,50 Seating Plane 0,15 0,05 1,20 MAX PINS ** 0,10 8 14 16 20 24 28 A MAX 3,10 5,10 5,10 6,60 7,90 9,80 A MIN 2,90 4,90 4,90 6,40 7,70 9,60 DIM 4040064/F 01/97 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion not to exceed 0,15. Falls within JEDEC MO-153 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security Telephony www.ti.com/telephony Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright 2005, Texas Instruments Incorporated