PHOTOMULTIPLIER TUBE R329-02 For Scintillation Counting, Fast Time Response 51 mm (2 Inch) Diameter, Bialkali Photocathode, 12-stage Head-On Type GENERAL Parameter Spectral Response Wavelength of Maximum Response Material Photocathode Minimum Effective Area Material Window Shape Structure Dynode Number of Stages Base Suitable Socket Description/Value 300 to 650 420 Bialkali 46 Borosilicate glass Plano-concave Linear focused 12 21-pin glass base E678-21A (supplied) Unit nm nm — mm dia. — — — — — — Value 2700 0.2 -80 to +50 Unit Vdc mA °C MAXIMUM RATINGS (Absolute Maximum Values) Supply Voltage Average Anode Current Ambient Temperature Parameter Between Anode and Cathode CHARACTERISTICS (at 25°C) Cathode Sensitivity Anode Sensitivity Parameter Luminous (2856K) Blue (CS 5-58 filter) Radiant at 420nm Luminous (2856K) Radiant at 420nm Gain Anode Dark Current (after 30min. storage in darkness) Anode Pulse Rise Time Time Response Electron Transit Time Transit Time Spread (T.T.S.) at 2% Deviation Pulse Linearity at 5% Deviation Min. 60 — — 30 — — — — — — — — Typ. 90 10.5 85 100 9.4 × 104 1.1 × 106 6.0 2.6 48 1.1 100 200 Max. — — — — — — 40 — — — — — Unit µA/lm µA/lm-b mA/W A/lm A/W — nA ns ns ns mA mA NOTE: Anode characteristics are measured with the voltage distribution ratio shown below. VOLTAGE DISTRIBUTION RATIO AND SUPPLY VOLTAGE Electrodes K G Dy1 Dy2 Dy3 Dy4 Dy5 Dy6 Dy7 Dy8 Dy9 Dy10 Dy11 Dy12 P Ratio 4 0 1 1.4 1 1 1 1 1 1 1 1 1 1 Supply Voltage: 1500Vdc, K: Cathode, Dy: Dynode, P: Anode, G: Grid * The shield pin should be connected to Dy5. SPECIAL VOLTAGE DISTRIBUTION RATIO FOR PULSE LINEARITY MEASUREMENTS Electrodes K G Dy1 Dy2 Dy3 Dy4 Dy5 Dy6 Dy7 Dy8 Dy9 Dy10 Dy11 Dy12 P Ratio 4.3 0 1 1.6 1 1 1 1.2 1.5 2 2.4 3 3.9 3 Supply Voltage: 2000Vdc, K: Cathode, Dy: Dynode, P: Anode, G:Grid Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATS U is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. © 1999 Hamamatsu Photonics K.K. PHOTOMULTIPLIER TUBE R329-02 Figure 1: Typical Spectral Response Figure 2: Typical Gain Characteristics TPMHB0204EA 108 TPMHB0604EA 107 10 106 CATHODE RADIANT SENSITIVITY GAIN CATHODE RADIANT SENSITIVITY (mA/W) QUANTUM EFFICIENCY (%) 100 1 QUANTUM EFFICIENCY 105 104 0.1 103 0.01 200 400 600 102 500 800 700 WAVELENGTH (nm) 1000 1500 2000 3000 SUPPLY VOLTAGE (V) Figure 3: Dimensional Outline and Basing Diagram (Unit: mm) FACEPLATE Socket (E678-21A) 53.0 ± 1.5 46 MIN. 51 19 PHOTOCATHODE SH IC DY10 DY8 DY12 9 10 11 12 13 DY6 14 DY4 P 8 HA COATING 7 DY11 6 DY9 5 DY7 4 3 2 DY5 1 DY3 DY1 LIGHT TIGHT SHIELD 15 16 DY2 17 G 18 IC 19 IC 21 20 K R5 56.8 127 ± 2 IC IC 6 13MAX. 21 PIN BASE 4 13 5 CONNECT SH TO DY5. TPMHA0123ED TACCA0011EA HAMAMATSU PHOTONICS K.K., Electron Tube Center 314-5, Shimokanzo, Toyooka-village, Iwata-gun, Shizuoka-ken, 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: Lough Point, 2 Gladbeck Way, Windmill Hill, Enfield, Middlesex EN2 7JA, United Kingdom, Telephone: (44)181-367-3560, Fax: (44)181-367-6384 North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 TPMH1254E01 MAR. 1999