ETC 521F

E-MAIL: [email protected]
WEB: www.angliac.com
REFLOW
SOLDERING
SOLDER PASTES / CLEANER
SCREEN/STENCIL AND
REWORK CLEANER
HIGH SPEED PRINTING, NO CLEAN,
PIN TESTABLE
Multicore MP100 solder cream has been formulated as a pale soft
residue product for printing and reflow in air, where process yield
is critical. With an enhanced tack and shelf life, it is highly
recommended for most applications.
◆
Suitable for fine pitch
high speed stencil
printing up to at least
150mm s-1
◆
Excellent printer open
time and tack life
◆
Excellent slump
resistance
◆
Resists solder balling
◆
Longer shelf life
◆
Preferred, all purpose
solder paste
◆
500g tubs
MP100 Solder Paste
Multicore Prozone SC-01 removes solder paste residues from
screens and stencils and can also be used for cleaning reworked
circuit assemblies.
◆
Removes all types of
residues from screens,
stencils, equipment
and PCB’s
◆
No ozone depleting
chemicals and chlorine
free
◆
Handy 500ml trigger
spray pack
Prozone ® Solvent Cleaner
Packaged in 500g plastic jars with an insert to seal off the surface of
the cream.
Meets IPC-SF-818 and Bellcore TR-NWT-000078 without cleaning.
Packaged in 500ml trigger spray packs.
500g TUBS
500ml SPRAY PACKS
Manf. Part No. &
Order Code
Manf. Part No. &
Order Code
SN62MP100AGS90
SC-01
A 62% tin, 36% lead, 2% silver alloy as 90%, total mass content.
Solder powder particle size 20 to 45µm.
MP100 should be stored within 24 hours of receipt at 5-10°C, tightly
sealed in its original container, to maximise shelf life.
Also available to special order
● Other Solder Pastes
● Other packaging options
- Syringes for small quantity
- Cartridges for all machine types
Further Multicore
products available
list overleaf > > > >
CAT/0135
01945 47 47 47
●
01945 47 48 49
●
www.angliac.com
[email protected]liac.com
521F