MEAN WELL AD-155 SERIES SWITCHING POWER SUPPLY ISO-9001 CERTIFIED MANUFACTURER .LOW COST, HIGH RELIABILITY .COMPACT SIZE, LIGHT WEIGHT .105ºC OUTPUT CAPACITOR .100% FULL LOAD BURN-IN TEST .INTERNATIONAL AC INPUT RANGE .BUILT IN EMI FILTER, LOW RIPPLE NOISE .HIGH EFFICIENCY, LOW WORKING TEMPERATURE .SOFT-START CIRCUIT, LIMITING AC SURGE CURRENT .SHORT CIRCUIT, OVERLOAD, OVER VOLTAGE PROTECTED AD-155A MODEL AD-155B AD-155C SPECIFICATION CH1 CH2 CH1 CH2 CH1 CH2 DC OUTPUT VOLTAGE 13.8V 13.3V 27.6V 27.1V 54V 53.5V OUTPUT V. TOLERANCE ±2% ---------- ±1% ---------- ±1% ---------- OUTPUT RATED CURRENT 10.5A 0.5A 5A 0.5A 2.7A 0.2A OUTPUT CURRENT RANGE 0-11.5A 0-0.5A 0-5.5A 0-0.5A 0-2.7A 0-0.5A 150mVp-p ---------- 150mVp-p ---------- 240mVp-p ---------- LINE REGULATION ±0.5% ---------- ±0.5% ---------- ±0.5% ---------- LOAD REGULATION ±0.5% ---------- ±0.5% ---------- ±0.5% ---------- RIPPLE & NOISE DC OUTPUT POWER 151.55W 151.55W 156.5W 80% 84% 84% CH1:12-14.5V CH1:24-29V CH1:48-58V EFFICIENCY DC VOLTAGE ADJ. INPUT VOLTAGE RANGE 88~264VAC 47~63Hz; 124~370VDC AC CURRENT 2.5A/115V 1.5A/230V INRUSH CURRENT COLD START 20A/115V 40A/230V LEAKAGE CURRENT <1mA/240VAC OVERLOAD PROTECTION CH1:105%~135% CH2:0.51~0.9A TYPE:CONSTANT CURRENT LIMITING RESET:AUTO RECOVERY OVER VOLTAGE PROTECTION CH1:115%~135% TYPE:SHUTDOWN BATTERY LOW PROTECTION 10V±0.8V 19.5V( +1.5V, -1V ) 39V±2V TEMP. COEFFICIENT ±0.03% / ºC (0~50ºC) SETUP, RISE, HOLD UP TIME 2s, 90ms, 16ms/115VAC 1s, 90ms, 20ms / 230VAC POWER FACTOR PF>0.92 VIBRATION 10~500Hz, 2G 10min./1cycle, PERIOD FOR 60min. EACH AXES WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:500VDC / 100M Ohms WORKING TEMP., HUMIDITY -10ºC~+60ºC(REFER TO OUTPUT DERATING CURVE), 20%~90% RH STORAGE TEMP., HUMIDITY -20ºC~+85ºC, 10%~95% RH DIMENSION 199*110*50mm CASE:906 WEIGHT 1Kg SAFETY STANDARDS UL1950, TUV EN60950 APPROVED EMC STANDARDS CISPR22(EN55022)CLASS B,EN61000-4-2,3,4,5,6,8,11;ENV50204,EN61000-3-2,-3 NOTE : 1.ALL PARAMETERS ARE SPECIFIED AT 230VAC INPUT, RATED LOAD, 25ºC 70% RH. AMBIENT. 2.TOLERANCE：INCLUDE SET UP TOLERANCE, LINE REGULATION, LOAD REGULATION. 3.RIPPLE & NOISE ARE MEASURED AT 20MHz BY USING A 12" TWISTED PAIR TERMINATED WITH A 0.1uF & 47uF CAPACITOR. 4.LINE REGULATION IS MEASURED FROM LOW LINE TO HIGH LINE AT RATED LOAD. 5.LOAD REGULATION IS MEASURED FROM 20% TO 100% RATED LOAD, AND OTHER OUTPUT AT 60% RATED LOAD. 6.EACH OUTPUT PROVIDE UP TO MAXIMUM CURRENT, BUT TOTAL LOAD CAN NOT EXCEED MAX. OUTPUT POWER. 2001-08-20