ETC AND185HAP

AND185HAP
Ultra Bright LED Lamps: Type 3
Weight: 0.31 g
Unit: mm
5.6±0.3
AND185HAP
InGaAlP High Brightness Amber Light
Emission
T-1 3/4 Package (5 mm)
5.0±0.2
1.0 MIN.
0.5
• Peak wavelength (λp = 612 nm) high bright emission
• All plastic mold type, clear colorless lens
• Low drive current: 1 to 20 mA DC
• Excellent On-Off contrast ratio
• Fast response time, capable of pulse operation
• High power luminous intensity
• Suitable for Outdoor Message Signboards, Automotive Use
25.4 MIN.
1.0±0.2
8.6±0.3
Features
Maximum Ratings (Ta = 25°C)
2.54
0.5
Cathode Index
1
2
1. Anode
2. Cathode
Characteristics
Symbol
Rating
Unit
Forward Current
IF
50
mA
Reverse Voltage
VR
5
V
Power Dissipation
PD
125
mW
Operating Temperature Range
TOpr
-40 to 85
°C
Storage Temperature Range
TStg
-40 to 100
°C
Electro-Optical Characteristics (Ta = 25°C)
Characteristics
Symbol
Test Condition
Minimum
Typical
Maximum
Unit
Forward Voltage
VF
IF = 20 mA
–
2.0
2.4
V
Reverse Current
IR
VR = 5 V
–
–
10
µA
Luminous Intensity
IV
IF = 20 mA
8,500
11,150
–
mcd
Peak Emission Wavelength
λP
IF = 20 mA
–
612
–
nm
Spectral Line Half Width
∆λ
IF = 20 mA
–
17
–
nm
Dominant Wavelength
λd
IF = 20 mA
–
605
–
nm
Full Viewing Angle
θ
IV = 1/2 Peak
–
6
–
degree
Precaution
Please be careful of the following:
1. Soldering temperature: 260°C max
Soldering time: 5 sec. max
Soldering portion of lead: up to 1.6 mm from the body of the device
2. The lead can be formed up to 5 mm from the body of the device without forming stress.
Soldering should be performed after the lead forming.
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com
4/4/05
AND185HAP
InGaAlP High Brightness Amber Light Emission
Ultra Bright LED Lamps: Type 3
IV – IF
IF – VF
20000
Ta = 25°C
Ta = 25°C
30
Luminous Intensity IV (mcd)
Forward Current IF (mA)
50
10
5
3
10000
5000
3000
1000
500
1
1.6
1.7
1.8
1.9
2.0
2.1
2.2
300
2.3
1
Forward Voltage VF (V)
5
10
30
50
100
Forward Current IF (mA)
IV – TC
Relative Luminous Intensity – Wavelength
3
1.0
Relative Luminous Intensity
Relative Luminous Intensity
3
1
0.5
0.3
0.1
-20
0
20
40
60
IF = 20 mA
Ta = 25°C
0.8
0.6
0.4
0.2
0
580
80
600
620
640
660
680
700
Wavelength λ (nm)
Case Temperature TC (°C)
Radiation Pattern
IF – Ta
20°
10°
0°
10°
Ta = 25°C
20°
30°
30°
40°
40°
50°
50°
60°
60°
70°
70°
80°
80°
Allowable Forward Current IF (mA)
80
60
40
20
90°
90°
0
0.2
0.4
0.6
0.8
0
0
20
40
60
80
Ambient Temperature Ta (°C)
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com
100
4/4/05