ETC AZ957-1C-5DE

AZ957
SUBMINIATURE
PC BOARD RELAY
FEATURES
•
•
•
•
•
•
•
Subminiature size for high density packaging
DIL pitch terminals
Epoxy sealed for automatic wave soldering
High sensitivity: 150 mW nominal with 96 mW pickup
Meets FCC Part 68.302 1500 V lightning surge
Meets FCC Part 68.304 1000 V dielectric
UL, CUR file E43203
CONTACTS
GENERAL DATA
Arrangement
SPDT (1 Form C)
Crossbar contacts
Ratings
Resistive load:
Max. switched power:
Max. switched current:
Life Expectancy
Mechanical
Electrical
Minimum operations
10 million operations
1 x 105 at 0.5 A 120 VAC Res.
30 W or 62.5 VA
1 A continous
2 A (30 s, 50% duty)
Max. switched voltage: 60 VDC* or 125 VAC
Operate Time (typical)
Standard: 3 ms at nominal coil voltage
Sensitive: 5 ms at nominal coil voltage
Release Time (typical)
1 ms at nominal coil voltage
(with no coil suppression)
* Note: If switching voltage is greater than 30 VDC,
Capacitance
Coil to contact: 7.0 pF
Contact to contact: 7.0 pF
Bounce (typical)
At 10 mA contact current
2 ms at operate
8 ms at release
special precautions must be taken.
Please contact the factory.
Rated Load
UL, CUR
1.0 A at 30 VDC resistive
0.3 A at 60 VDC resistive
0.5 A at 125 VAC resistive
Material
Silver palladium, gold clad
Resistance
< 100 milliohms initially
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Standard coil
Sensitive coil
Temperature
Standard coil: 128 mW
Sensitive coil: 96 mW
Dielectric Strength
1250 Vrms coil to contact
(at sea level for 1 min.) 400 Vrms between open contacts
Meets FCC Part 68.302 1500 V lightning surge
Meets FCC Part 68.304 1000 V dielectric
Insulation
Resistance
100 megohms min. at 20°C, 500 VDC,
50% RH
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
At nominal coil voltage
Standard: -40°C (-40°F) to 70°C (158°F)
Sensitive: -40°C (-40°F) to 80°C (176°F)
Both: -40°C (-40°F) to 105°C (221°F)
Storage
0.5 W at 20°C (68°F) ambient
33°C (59°F) at nominal coil voltage
25°C (45°F) at nominal coil voltage
Max. 105°C (221°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
ZETTLER
Vibration
0.13" (3.3 mm) DA at 10–55 Hz
Shock
10 g
Enclosure
P.E.T. polyester
Terminals
Tinned copper alloy
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Immersion Time
30 seconds
Weight
2.2 grams
Packing unit in pcs
20 per plastic tube / 1000 per carton box
electronics GmbH
Junkersstrasse 3, D-82178 Puchheim, Germany
Tel. +49 89 800 97 0
Fax +49 89 800 97 200
[email protected]
www.ZETTLERelectronics.com
2004-08-22
AZ957
RELAY ORDERING DATA
COIL SPECIFICATIONS: STANDARD COIL
Must.
Operate
VDC
1.2
Max.
Continuous
VDC
2.4
3
2.4
4.7
5
4.0
7.9
125
AZ957-1C-5DE
6
4.8
9.5
180
AZ957-1C-6DE
9
7.2
14.2
405
AZ957-1C-9DE
12
9.6
19.0
720
AZ957-1C-12DE
24
19.2
37.9
2,880
AZ957-1C-24DE
45.0
ORDER NUMBER
AZ957-1C-1.5DE
AZ957-1C-3DE
120
Coil Temperature Rise °C
Coil
Resistance
Ohm ±10%
11.3
Standard Coil 200 mW
Nominal
Coil
VDC
1.5
100
80
60
40
1A
20
0A
0
60%
COIL SPECIFICATIONS: SENSITIVE COIL
Coil
Resistance
Ohm ±10%
15.0
Max.
Continuous
VDC
2.7
3
2.4
5.5
5
4.0
9.1
167
AZ957-1C-5DSE
6
4.8
11.0
240
AZ957-1C-6DSE
9
7.2
16.4
540
AZ957-1C-9DSE
12
9.6
21.9
960
AZ957-1C-12DSE
24
19.2
43.8
3,840
AZ957-1C-24DSE
60.0
80%
90%
100%
110%
120%
Sensitive Coil 150 mW
Must.
Operate
VDC
1.2
ORDER NUMBER
AZ957-1C-1.5DSE
AZ957-1C-3DSE
120
Coil Temperature Rise °C
Nominal
Coil
VDC
1.5
70%
Percent of Nominal Coil Voltage (at 20°C)
100
80
60
40
1A
20
0
0A
60%
70%
80%
90%
100%
110%
120%
Percent of Nominal Coil Voltage (at 20°C)
MECHANICAL DATA
PC BOARD LAYOUT
.504MAX
[12.8]
.307MAX
[7.8]
.406MAX
[10.3]
.200
[5.08]
6 x ø .039
[ø 1.0]
.020
[0.5]
.138
[3.5]
.020
[0.5]
.100
[2.54]
.300
[7.62]
.100
[2.54]
Viewed toward terminals
WIRING DIAGRAM
.300
[7.62]
.200
[5.08]
Viewed toward terminals
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
ZETTLER
electronics GmbH
Junkersstrasse 3, D-82178 Puchheim, Germany
Tel. +49 89 800 97 0
Fax +49 89 800 97 200
[email protected]
www.ZETTLERelectronics.com
2004-08-22