CNW11AV1 TRANSISTOR OPTOCOUPLERS PACKAGES CIRCUIT 7.30 7.30 3.50 6.50 13.0o 0.4 3.0 2.7 0.26 6.5 7.62 1.20 2.54 0.5 13.0o DESCRIPTION The CNW11AV1X/2X/3X is an optically coupled isolator. It consists of a Gallium Arsenide infrared emitting diode and a NPN silicon phototransistor mounted in a standard 6-pin plastic dual-in-line package. Isocom Ltd supplies a multitude of plastic optocouplers for all applications varying from standard transistor optos through to Darlington and Schmitt Trigger devices. It’s massive family of optos vary in speed allowing maximum opportunity to engineers worldwide. All devices are performance guaranteed between 20ºC and +80ºC and have completed rigorous testing. The Company's customers can be assured of our commitment to stringent quality, reliability and inspection standards, as demonstrated by our existing approvals. Other customer specific options can also be offered. FEATURES 4000V Isolation 8mm (min) Creeping Distance between Emitter & Detector Leads Designed for VDE and British Standards Applications Isocom Ltd reserves the right to change the details on this specification without notice. Please consult Isocom Ltd prior to use. Isocom Ltd cannot accept liability for any errors or omissions. For sales enquiries, or further information, please contact our sales office at : Isocom Ltd, Hutton Close, Crowther Industrial Estate, District 3, Washington, NE38 0AH Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 Email [email protected] Or go to the Isocom Website @ : Http://www.isocomoptocouplers.com ABSOLUTE MAXIMUM RATINGS Storage Temperature Operating Temperature Lead Soldering Temperature Input-to-Output Isolation Voltage -55°C to +150°C -55°C to +100°C 260°C 1.6mm from case for 10S 4000VDC Input Diode Forward DC Current Reverse DC Voltage Peak forward Current Power Dissipation 60mA 6V 3A 100mW 1µS p.w. 300 pps Derate linearly above 25°C at 1.33mW/°C. 70V 7V 70V 300mW BVCEO BVECO BVCBO Derate linearly above 25°C at 2.0mW/°C Output Transistor Collector-Emitter Voltage Emitter-collector voltage Collector-base Voltage Power Dissipation ELECTRICAL CHARACTERISTICS TA = 25°C U.O.S. (each channel where appropriate). Input Diode Electrical Characteristics Parameter Symbol Test Conditions Forward Voltage VF IF = 10mA IF = 10mA, TA= -55OC IF = 10mA, TA= +100OC Reverse Current IR VR= 6.0V Output Detector Electrical Characteristics Collector-Emitter BVCEO IC = 1mA Breakdown Voltage Emitter-base Voltage BVEBO IE= 100µA Collector-base Voltage BVCBO IC= 100µA Collector-emitter Dark ICEO VCE= 10V, IF= 0 Current Collector-emitter CCE VCE= 10V, f= 1Mhz Capacitance Coupled Electrical Characteristics DC Current Transfer Ratio IC/IF IF = 10mA, VCE = 10V Input-to-Output Isolation Resistance Collector-Emitter Saturation Voltage Capacitance Input to Output Turn-on Time Turn-off Time Input-to-Output Isolation Voltage Device Min 0.8 0.9 Typ Max 1.5 1.7 1.4 10 70 V 7 70 V V nA 50 2.0 AV1X AV2X AV3X Units V V V µA 100 50 20 pF 300 % Ω 1011 RISO VIO= 500V VCE(Sat) IF= 20mA, IC= 2mA 0.4 V CIO TON TOFF f= 1Mhz VCC= 10V, IC= 2mA, RL= 100Ω 0.5 15 15 pF µS µS V 4000 Isocom Ltd reserves the right to change the details on this specification without notice. Please consult Isocom Ltd prior to use. Isocom Ltd cannot accept liability for any errors or omissions. For sales enquiries, or further information, please contact our sales office at : Isocom Ltd, Hutton Close, Crowther Industrial Estate, District 3, Washington, NE38 0AH Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 Email [email protected] Or go to the Isocom Website @ : Http://www.isocomoptocouplers.com