T-1(3mm) BI-COLOR INDICATOR LAMPS Features ! UNIFORM ! LOW !3 LIGHT OUTPUT. ! I.C. COLOR (MIXED COLOR) AVAILABLE. BRIGHT VERSION AVAILABLE. COMPATIBLE. ! LONG HIGH EFFICIENCY RED / YELLOW L115VGYW GREEN / YELLOW with Gallium Arsenide Phosphide on Gallium Phosphide WHITE DIFFUSION LENS. ! SUPER L115VEYW The High Efficiency Red source color devices are made LEADS WITH ONE COMMON LEAD. ! THIRD HIGH EFFICIENCY RED / GREEN Description POWER CONSUMPTION. ! MILKY L115VEGW Orange Light Emitting Diode. The Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light LIFE - SOLID STATE RELIABILITY. Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. SPEC NO: CDA0790 APPROVED: J.LU REV NO: V.1 CHECKED: DATE: NOV/18/2001 DRAWN: Y.F.XU PAGE: 1 OF 4 Selection Guide Par t No . Di c e L en s Ty p e HIGH EFFICIENCY RED (GaAsP/GaP) L115VEGW GREEN (GaP) HIGH EFFICIENCY RED (GaAsP/GaP) L115VEYW YELLOW (GaAsP/GaP) GREEN (GaP) L115VGYW Iv (mc d ) @ 20 mA WHITE DIFFUSED WHITE DIFFUSED WHITE DIFFUSED YELLOW (GaAsP/GaP) View in g An g l e Min . Ty p . 12 50 12 40 12 50 8 15 12 30 8 15 2θ1/2 60° 60° 60° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25°°C Sy m b o l Par ameter λpeak Peak Wavelength High Efficiency Red Green Yellow λD Dominate Wavelength ∆λ1/2 Dev ic e Ty p . Un i t s Tes t Co n d itio n s 627 565 590 nm IF=20mA High Efficiency Red Green Yellow 625 568 588 nm IF=20mA High Efficiency Red Spectral Line Halfwidth Green Yellow 45 30 35 nm IF=20mA pF VF=0V;f=1MHz 2.5 2.5 2.5 V IF=20mA 10 uA VR = 5V C Capacitance High Efficiency Red Green Yellow 15 15 20 VF Forward Voltage High Efficiency Red Green Yellow 2.0 2.2 2.1 IR Reverse Current All Max . Absolute Maximum Ratings at T)=25°°C Par ameter Hig h Effic ien c y Red Gr een Yello w Un i t s Power dissipation 105 105 105 mW DC Forward Current 30 25 30 mA Peak Forward Current [1] 160 140 140 mA 5 5 5 V Reverse Voltage -40°C To +85°C Operating/Storage Temperature 260°C For 5 Seconds Lead Solder Temperature [2] Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 4mm below package base. SPEC NO: CDA0790 APPROVED: J.LU REV NO: V.1 CHECKED: DATE: NOV/18/2001 DRAWN: Y.F.XU PAGE: 2 OF 4 High Efficiency Red / Green L115VEGW SPEC NO: CDA0790 APPROVED: J.LU REV NO: V.1 CHECKED: DATE: NOV/18/2001 DRAWN: Y.F.XU PAGE: 3 OF 4 High Efficiency Red / Yellow L115VEYW Green / Yellow L115VGYW SPEC NO: CDA0790 APPROVED: J.LU REV NO: V.1 CHECKED: DATE: NOV/18/2001 DRAWN: Y.F.XU PAGE: 4 OF 4