TPS3808 www.ti.com .......................................................................................................................................................... SBVS050J – MAY 2004 – REVISED AUGUST 2008 Low Quiescent Current, Programmable-Delay Supervisory Circuit FEATURES DESCRIPTION 1 • Power-On Reset Generator with Adjustable Delay Time: 1.25ms to 10s • Very Low Quiescent Current: 2.4µA typ • High Threshold Accuracy: 0.5% typ • Fixed Threshold Voltages for Standard Voltage Rails from 0.9V to 5V and Adjustable Voltage Down to 0.4V Are Available • Manual Reset (MR) Input • Open-Drain RESET Output • Temperature Range: –40°C to +125°C • Small SOT23 and 2mm × 2mm QFN Packages The TPS3808xxx family of microprocessor supervisory circuits monitor system voltages from 0.4V to 5.0V, asserting an open-drain RESET signal when the SENSE voltage drops below a preset threshold or when the manual reset (MR) pin drops to a logic low. The RESET output remains low for the user-adjustable delay time after the SENSE voltage and manual reset (MR) return above the respective thresholds. 23 The TPS3808 uses a precision reference to achieve 0.5% threshold accuracy for VIT ≤ 3.3V. The reset delay time can be set to 20ms by disconnecting the CT pin, 300ms by connecting the CT pin to VDD using a resistor, or can be user-adjusted between 1.25ms and 10s by connecting the CT pin to an external capacitor. The TPS3808 has a very low typical quiescent current of 2.4µA so it is well-suited to battery-powered applications. It is available in a small SOT23 and an ultra-small 2mm × 2mm QFN PowerPAD™ package, and is fully specified over a temperature range of –40°C to +125°C (TJ). APPLICATIONS • • • • • DSP or Microcontroller Applications Notebook/Desktop Computers PDAs/Hand-Held Products Portable/Battery-Powered Products FPGA/ASIC Applications 1.2V 3.3V DBV PACKAGE SOT23 (TOP VIEW) SENSE VDD SENSE VDD TPS3808G12 TPS3808G33 RESET CT GND MR CT RESET GND Typical Application Circuit VI/O VCORE RESET 1 6 VDD GND 2 5 SENSE MR 3 4 CT DSP GPIO GND DRV PACKAGE 2mm x 2mm QFN (TOP VIEW) VDD 1 SENSE 2 CT 3 Power PAD 6 RESET 5 GND 4 MR 1 2 3 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PowerPAD is a trademark of Texas Instruments. All other trademarks are the property of their respective owners. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2004–2008, Texas Instruments Incorporated TPS3808 SBVS050J – MAY 2004 – REVISED AUGUST 2008 .......................................................................................................................................................... www.ti.com This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. ORDERING INFORMATION (1) (1) (2) PRODUCT NOMINAL SUPPLY VOLTAGE (2) THRESHOLD VOLTAGE (VIT) TPS3808G01 Adjustable 0.405V TPS3808G09 0.9V 0.84V TPS3808G12 1.2V 1.12V TPS3808G125 1.25V 1.16V TPS3808G15 1.5V 1.40V TPS3808G18 1.8V 1.67V TPS3808G19 1.9V 1.77V TPS3808G25 2.5V 2.33V TPS3808G30 3.0V 2.79V TPS3808G33 3.3V 3.07V TPS3808G50 5.0V 4.65V For the most current package and ordering information see the Package Option Addendum at the end of this document, or see the TI web site at www.ti.com. Custom threshold voltages from 0.82V to 3.3V, 4.4V to 5.0V are available through the use of factory EEPROM programming. Minimum order quantities apply. Contact factory for details and availability. ABSOLUTE MAXIMUM RATINGS (1) Over operating junction temperature range, unless otherwise noted. Input voltage range, VDD CT voltage range, VCT Other voltage ranges: VRESET, VMR, VSENSE TPS3808 UNIT –0.3 to 7.0 V –0.3 to VDD + 0.3 V –0.3 to 7 V 5 mA Operating junction temperature range, TJ (2) –40 to +150 °C Storage temperature range, TSTG RESET pin current –65 to +150 °C ESD rating, HBM 2 kV ESD rating, CDM 500 V (1) (2) 2 Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under the Electrical Characteristics is not implied. Exposure to absolute maximum rated conditions for extended periods may affect device reliability. As a result of the low dissipated power in this device, it is assumed that TJ = TA. Submit Documentation Feedback Copyright © 2004–2008, Texas Instruments Incorporated Product Folder Link(s): TPS3808 TPS3808 www.ti.com .......................................................................................................................................................... SBVS050J – MAY 2004 – REVISED AUGUST 2008 ELECTRICAL CHARACTERISTICS 1.7V ≤ VDD ≤ 6.5V, RLRESET = 100kΩ, CLRESET = 50pF, over operating temperature range (TJ = –40°C to +125°C), unless otherwise noted. Typical values are at TJ = +25°C. PARAMETER VDD TEST CONDITIONS –40°C < TJ < +125°C Input supply range IDD 0°C < TJ < +85°C Supply current (current into VDD pin) VOL Low-level output voltage Power-up reset voltage (1) Negative-going input threshold accuracy VIT MIN 1.65 6.5 5.0 µA VDD = 6.5V, RESET not asserted MR, RESET, CT open 2.7 6.0 µA 1.3V ≤ VDD < 1.8V, IOL = 0.4mA 0.3 V 1.8V ≤ VDD ≤ 6.5V, IOL = 1.0mA 0.4 V VOL (max) = 0.2V, IRESET = 15µA 0.8 V ±1.0 +2.0 VIT ≤ 3.3V –1.5 ±0.5 +1.5 3.3V < VIT ≤ 5.0V –2.0 ±1.0 +2.0 VIT ≤ 3.3V –40°C < TJ < +85°C –1.25 ±0.5 +1.25 3.3V < VIT ≤ 5.0V –40°C < TJ < +85°C –1.5 ±0.5 +1.5 1.5 3.0 1.0 2.0 1.0 2.5 RMR MR Internal pull-up resistance IOH RESET leakage current CIN Input capacitance, any pin VIL MR logic low input VIH MR logic high input tw Input pulse width to RESET –40°C < TJ < +85°C Fixed versions 70 TPS3808G01 VSENSE = VIT Fixed versions VSENSE = 6.5V RESET delay time –25 300 5 Other pins VIN = 0V to 6.5V 5 0 0.3 VDD VDD VIH = 1.05VIT, VIL = 0.95VIT 20 MR VIH = 0.7VDD, VIL = 0.3VDD 0.001 See Timing Diagram CT = 100pF CT = 180nF nA nA pF 0.7 VDD SENSE %VIT µA 1.7 VIN = 0V to VDD % kΩ 25 VRESET = 6.5V, RESET not asserted CT = Open td 90 CT pin CT = VDD V 2.4 –2.0 Hysteresis on VIT pin UNIT VDD = 3.3V, RESET not asserted MR, RESET, CT open TPS3808G01 VHYS Input current at SENSE pin MAX 6.5 TPS3808G01 ISENSE TYP 1.7 V µs 12 20 28 ms 180 300 420 ms 0.75 1.25 1.75 ms 1.2 1.7 0.7 s Propagation delay MR to RESET VIH = 0.7VDD, VIL = 0.3VDD 150 ns tpHL High to low level RESET delay SENSE to RESET VIH = 1.05VIT, VIL = 0.95VIT 20 µs θJA Thermal resistance, junction-to-ambient 290 °C/W (1) The lowest supply voltage (VDD) at which RESET becomes active. Trise(VDD) ≥ 15µs/V. Submit Documentation Feedback Copyright © 2004–2008, Texas Instruments Incorporated Product Folder Link(s): TPS3808 3 TPS3808 SBVS050J – MAY 2004 – REVISED AUGUST 2008 .......................................................................................................................................................... www.ti.com FUNCTIONAL BLOCK DIAGRAMS VDD VDD VDD TPS3808G01 Adjustable Voltage VDD 90k 90k RESET MR SENSE Reset Logic Timer Reset Logic Timer R1 − − SENSE RESET MR CT + CT + R2 0.4V VREF 0.4V VREF R1 + R2 = 4MΩ GND GND Adjustable Voltage Version Fixed Voltage Version Figure 1. Adjustable and Fixed Voltage Versions PIN ASSIGNMENTS DBV PACKAGE SOT23 (TOP VIEW) 6 DRV PACKAGE 2mm × 2mm QFN (TOP VIEW) RESET 1 GND 2 5 SENSE MR 3 4 CT VDD VDD 1 SENSE 2 CT 3 Power PAD 6 RESET 5 GND 4 MR Table 1. TERMINAL FUNCTIONS TERMINAL NAME SOT23 (DBV) PIN NO. RESET 1 RESET is an open-drain output that is driven to a low impedance state when RESET is asserted (either the SENSE input is lower than the threshold voltage (VIT) or the MR pin is set to a logic low). RESET will remain low (asserted) for the reset period after both SENSE is above VIT and MR is set to a logic high. A pull-up resistor from 10kΩ to 1MΩ should be used on this pin, and allows the reset pin to attain voltages higher than VDD. GND 2 Ground MR 3 Driving the manual reset pin (MR) low asserts RESET. MR is internally tied to VDD by a 90kΩ pull-up resistor. CT 4 Reset period programming pin. Connecting this pin to VDD through a 40kΩ to 200kΩ resistor or leaving it open results in fixed delay times (see Electrical Characteristics). Connecting this pin to a ground referenced capacitor ≥ 100pF gives a user-programmable delay time. See the Selecting the Reset Delay Time section for more information. SENSE 5 This pin is connected to the voltage to be monitored. If the voltage at this terminal drops below the threshold voltage VIT, then RESET is asserted. VDD 6 Supply voltage. It is good analog design practice to place a 0.1µF ceramic capacitor close to this pin. PowerPAD 4 DESCRIPTION PowerPAD. Connect to ground plane to enhance thermal performance of package. Submit Documentation Feedback Copyright © 2004–2008, Texas Instruments Incorporated Product Folder Link(s): TPS3808 TPS3808 www.ti.com .......................................................................................................................................................... SBVS050J – MAY 2004 – REVISED AUGUST 2008 TIMING DIAGRAM VDD 0.8V 0.0V RESET tD = Reset Delay tD tD tD = Undefined State SENSE VIT + VHYS VIT MR 0.7VDD 0.3VDD Time Figure 2. TPS3808 Timing Diagram Showing MR and SENSE Reset Timing TRUTH TABLE MR SENSE > VIT RESET L 0 L L 1 L H 0 L H 1 H Submit Documentation Feedback Copyright © 2004–2008, Texas Instruments Incorporated Product Folder Link(s): TPS3808 5 TPS3808 SBVS050J – MAY 2004 – REVISED AUGUST 2008 .......................................................................................................................................................... www.ti.com TYPICAL CHARACTERISTICS At TJ = +25°C, VDD = 3.3V, RLRESET = 100kΩ, and CLRESET = 50pF, unless otherwise noted. SUPPLY CURRENT vs SUPPLY VOLTAGE RESET TIMEOUT PERIOD vs CT 4.0 100 3.5 IDD (µA) RESET Timeout (sec) +125_ C 3.0 +85_ C 2.5 2.0 +25_C 1.5 1.0 10 −40°C, +25°C, +125°C 1 0.1 0.01 − 40_ C 0.5 0 0 1 2 3 4 5 6 0.001 0.0001 7 0.001 0.01 VDD (V) NORMALIZED RESET TIMEOUT PERIOD vs TEMPERATURE (CT = OPEN, CT = VDD, CT = Any) MAXIMUM TRANSIENT DURATION AT SENSE vs SENSE THRESHOLD OVERDRIVE VOLTAGE 100 Transient Duration below VIT (µs) Normalized RESET Timeout Period (%) 8 6 4 2 0 −2 −4 −6 −8 RESET OCCURS ABOVE THE CURVE 10 1 −10 −30 −10 10 30 50 70 90 110 0 130 5 10 20 25 30 35 40 45 50 Overdrive (%VIT) Figure 6. NORMALIZED SENSE THRESHOLD VOLTAGE (VIT) vs TEMPERATURE LOW-LEVEL RESET VOLTAGE vs RESET CURRENT 4.5 VOL Low−Level RESET Voltage (V) 1.0 0.8 0.6 Normalized VIT (%) 15 Figure 5. 0.4 0.2 0 −0.2 −0.4 −0.6 −0.8 −1.0 −50 10 Figure 4. Temperature (°C) 4.0 3.5 3.0 2.5 2.0 VDD = 1.8V 1.5 1.0 0.5 0 −30 −10 10 30 50 70 90 110 130 0 Temperature (°C) Figure 7. 6 1 Figure 3. 10 −50 0.1 CT (µF) 0.5 1.0 1.5 2.0 2.5 RESET Current (mA) 3.0 3.5 4.0 Figure 8. Submit Documentation Feedback Copyright © 2004–2008, Texas Instruments Incorporated Product Folder Link(s): TPS3808 TPS3808 www.ti.com .......................................................................................................................................................... SBVS050J – MAY 2004 – REVISED AUGUST 2008 TYPICAL CHARACTERISTICS (continued) At TJ = +25°C, VDD = 3.3V, RLRESET = 100kΩ, and CLRESET = 50pF, unless otherwise noted. LOW-LEVEL RESET VOLTAGE vs RESET CURRENT VOL Low−Level RESET Voltage (V) 0.8 0.7 0.6 0.5 0.4 VDD = 3.3V 0.3 0.2 0.1 VDD = 6.5V 0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 RESET Current (mA) Figure 9. Submit Documentation Feedback Copyright © 2004–2008, Texas Instruments Incorporated Product Folder Link(s): TPS3808 7 TPS3808 SBVS050J – MAY 2004 – REVISED AUGUST 2008 .......................................................................................................................................................... www.ti.com DEVICE OPERATION The TPS3808 microprocessor supervisory product family is designed to assert a RESET signal when either the SENSE pin voltage drops below VIT or the manual reset (MR) is driven low. The RESET output remains asserted for a user-adjustable time after both the manual reset (MR) and SENSE voltages return above the respective thresholds. A broad range of voltage threshold and reset delay time adjustments are available, allowing these devices to be used in a wide array of applications. Reset threshold voltages can be factory-set from 0.82V to 3.3V or from 4.4V to 5.0V, while the TPS3808G01 can be set to any voltage above 0.405V using an external resistor divider. Two preset delay times are also user-selectable: connecting the CT pin to VDD results in a 300ms reset delay, while leaving the CT pin open yields a 20ms reset delay. In addition, connecting a capacitor between CT and GND allows the designer to select any reset delay period from 1.25ms to 10s. supply line can be used to allow the reset signal for the microprocessor to have a voltage higher than VDD (up to 6.5V). The pull-up resistor should be no smaller than 10kΩ as a result of the finite impedance of the RESET line. SENSE INPUT The SENSE input provides a terminal at which any system voltage can be monitored. If the voltage on this pin drops below VIT, then RESET is asserted. The comparator has a built-in hysteresis to ensure smooth RESET assertions and de-assertions. It is good analog design practice to put a 1nF to 10nF bypass capacitor on the SENSE input to reduce sensitivity to transients and layout parasitics. The TPS3808G01 can be used to monitor any voltage rail down to 0.405V using the circuit shown in Figure 11. VIN RESET OUTPUT A typical application of the TPS3808G25 used with the OMAP1510 processor is shown in Figure 10. The open-drain RESET output is typically connected to the RESET input of a microprocessor. A pull-up resistor must be used to hold this line high when RESET is not asserted. The RESET output is undefined for voltage below 0.8V, but this is normally not a problem since most microprocessors do not function below this voltage. RESET remains high (unasserted) as long as SENSE is above its threshold (VIT) and the manual reset (MR) is logic high. If either SENSE falls below VIT or MR is driven low, RESET is asserted, driving the RESET pin to a low impedance. 2.5V V DDSHV 1, 3, 6, 7, 9 SENSE VDD T PS 380 8G 25 MR CT 1MΩ RESET GND O M AP 1510 RESPWRON GND Figure 10. Typical Application of the TPS3808 with an OMAP Processor Once MR is again logic high and SENSE is above VIT + VHYS (the threshold hysteresis), a delay circuit is enabled which holds RESET low for a specified reset delay period. Once the reset delay has expired, the RESET pin goes to a high impedance state. The pull-up resistor from the open-drain RESET to the 8 VOUT VDD VIT¢ = (1 + R1 R1 ) 0.405 R2 TPS3808G01 SENSE RESET 1nF R2 GND Figure 11. Using the TPS3808G01 to Monitor a User-Defined Threshold Voltage MANUAL RESET (MR) INPUT The manual reset (MR) input allows a processor or other logic circuits to initiate a reset. A logic low (0.3VDD) on MR causes RESET to assert. After MR returns to a logic high and SENSE is above its reset threshold, RESET is de-asserted after the user defined reset delay expires. Note that MR is internally tied to VDD using a 90kΩ resistor so this pin can be left unconnected if MR will not be used. See Figure 12 for how MR can be used to monitor multiple system voltages. Note that if the logic signal driving MR does not go fully to VDD, there will be some additional current draw into VDD as a result of the internal pull-up resistor on MR. To minimize current draw, a logic-level FET can be used as illustrated in Figure 13. Submit Documentation Feedback Copyright © 2004–2008, Texas Instruments Incorporated Product Folder Link(s): TPS3808 TPS3808 www.ti.com .......................................................................................................................................................... SBVS050J – MAY 2004 – REVISED AUGUST 2008 1.2V by the choice of resistor. Figure 14b shows a fixed 20ms delay time by leaving the CT pin open. Figure 14c shows a ground referenced capacitor connected to CT for a user-defined program time between 1.25ms and 10s. 3.3V SENSE TPS3808G12 TPS3808G33 RESET CT V I/O SENSE V DD V DD MR CT GND V CORE The capacitor CT should be ≥ 100pF nominal value in order for the TPS3808xxx to recognize that the capacitor is present. The capacitor value for a given delay time can be calculated using the following equation: DSP RESET GPIO GND GND C T (nF) + ƪt D (s)*0.5 10*3 (s)ƫ 175 (1) The reset delay time is determined by the time it takes an on-chip precision 220nA current source to charge the external capacitor to 1.23V. When a RESET is asserted the capacitor is discharged. When the RESET conditions are cleared, the internal current source is enabled and begins to charge the external capacitor. When the voltage on this capacitor reaches 1.23V, RESET is de-asserted. Note that a low leakage type capacitor such as a ceramic should be used, and that stray capacitance around this pin may cause errors in the reset delay time. Figure 12. Using MR to Monitor Multiple System Voltages 3.3V V DD SENSE 90kW MR TPS3808xxx IMMUNITY TO SENSE PIN VOLTAGE TRANSIENTS GND The TPS3808 is relatively immune to short negative transients on the SENSE pin. Sensitivity to transients is dependent on threshold overdrive, as shown in the Maximum Transient Duration at Sense vs Sense Threshold Overdrive Voltage graph (Figure 6) in the Typical Characteristics section. Figure 13. Using an External MOSFET to Minimize IDD When MR Signal Does Not Go to VDD SELECTING THE RESET DELAY TIME The TPS3808 has three options for setting the RESET delay time as shown in Figure 14. Figure 14a shows the configuration for a fixed 300ms typical delay time by tying CT to VDD; a resistor from 40kΩ to 200kΩ must be used. Supply current is not affected 3.3V 3.3V 50kΩ 3.3V SENSE VDD SENSE VDD SENSE VDD TPS3808G33 TPS3808G33 TPS3808G33 CT CT RESET RESET CT RESET CT 300ms Delay 20ms Delay Delay (s) = CT (nF) + 0.5 x 10−3 (s) 175 (c) (b) (a) Figure 14. Configuration Used to Set the RESET Delay Time Submit Documentation Feedback Copyright © 2004–2008, Texas Instruments Incorporated Product Folder Link(s): TPS3808 9 PACKAGE OPTION ADDENDUM www.ti.com 1-Jul-2010 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp (3) Samples (Requires Login) TPS3808G01DBVR ACTIVE SOT-23 DBV 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3808G01DBVRG4 ACTIVE SOT-23 DBV 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3808G01DBVT ACTIVE SOT-23 DBV 6 250 Green (RoHS & no Sb/Br) Call TI Level-1-260C-UNLIM Purchase Samples TPS3808G01DBVTG4 ACTIVE SOT-23 DBV 6 250 Green (RoHS & no Sb/Br) Call TI Level-1-260C-UNLIM Purchase Samples TPS3808G01DRVR ACTIVE SON DRV 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3808G01DRVRG4 ACTIVE SON DRV 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3808G01DRVT ACTIVE SON DRV 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples TPS3808G01DRVTG4 ACTIVE SON DRV 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples TPS3808G09DBVR ACTIVE SOT-23 DBV 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3808G09DBVRG4 ACTIVE SOT-23 DBV 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3808G09DBVT ACTIVE SOT-23 DBV 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples TPS3808G09DBVTG4 ACTIVE SOT-23 DBV 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples TPS3808G125DBVR ACTIVE SOT-23 DBV 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3808G125DBVRG4 ACTIVE SOT-23 DBV 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3808G125DBVT ACTIVE SOT-23 DBV 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor or Sales Office TPS3808G125DBVTG4 ACTIVE SOT-23 DBV 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor or Sales Office TPS3808G12DBVR ACTIVE SOT-23 DBV 6 3000 Green (RoHS & no Sb/Br) Addendum-Page 1 Call TI Level-1-260C-UNLIM Request Free Samples PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 1-Jul-2010 Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp (3) Samples (Requires Login) TPS3808G12DBVRG4 ACTIVE SOT-23 DBV 6 3000 Green (RoHS & no Sb/Br) Call TI Level-1-260C-UNLIM Request Free Samples TPS3808G12DBVT ACTIVE SOT-23 DBV 6 250 Green (RoHS & no Sb/Br) Call TI Level-1-260C-UNLIM Contact TI Distributor or Sales Office TPS3808G12DBVTG4 ACTIVE SOT-23 DBV 6 250 Green (RoHS & no Sb/Br) Call TI Level-1-260C-UNLIM Contact TI Distributor or Sales Office TPS3808G12DRVR ACTIVE SON DRV 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples TPS3808G12DRVRG4 ACTIVE SON DRV 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples TPS3808G12DRVT ACTIVE SON DRV 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3808G12DRVTG4 ACTIVE SON DRV 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3808G15DBVR ACTIVE SOT-23 DBV 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3808G15DBVRG4 ACTIVE SOT-23 DBV 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3808G15DBVT ACTIVE SOT-23 DBV 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples TPS3808G15DBVTG4 ACTIVE SOT-23 DBV 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples TPS3808G15DRVR ACTIVE SON DRV 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3808G15DRVRG4 ACTIVE SON DRV 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3808G15DRVT ACTIVE SON DRV 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples TPS3808G15DRVTG4 ACTIVE SON DRV 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples TPS3808G18DBVR ACTIVE SOT-23 DBV 6 3000 Green (RoHS & no Sb/Br) Call TI Level-1-260C-UNLIM Request Free Samples TPS3808G18DBVRG4 ACTIVE SOT-23 DBV 6 3000 Green (RoHS & no Sb/Br) Call TI Level-1-260C-UNLIM Request Free Samples TPS3808G18DBVT ACTIVE SOT-23 DBV 6 250 Green (RoHS & no Sb/Br) Call TI Level-1-260C-UNLIM Contact TI Distributor or Sales Office Addendum-Page 2 PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 1-Jul-2010 Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish (3) Samples (Requires Login) TPS3808G18DBVTG4 ACTIVE SOT-23 DBV 6 250 Green (RoHS & no Sb/Br) TPS3808G18DRVR ACTIVE SON DRV 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3808G18DRVT ACTIVE SON DRV 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples TPS3808G19DBVR ACTIVE SOT-23 DBV 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3808G19DBVRG4 ACTIVE SOT-23 DBV 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3808G19DBVT ACTIVE SOT-23 DBV 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples TPS3808G19DBVTG4 ACTIVE SOT-23 DBV 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples TPS3808G25DBVR ACTIVE SOT-23 DBV 6 3000 Green (RoHS & no Sb/Br) Call TI Level-1-260C-UNLIM Request Free Samples TPS3808G25DBVRG4 ACTIVE SOT-23 DBV 6 3000 Green (RoHS & no Sb/Br) Call TI Level-1-260C-UNLIM Request Free Samples TPS3808G25DBVT ACTIVE SOT-23 DBV 6 250 Green (RoHS & no Sb/Br) Call TI Level-1-260C-UNLIM Purchase Samples TPS3808G25DBVTG4 ACTIVE SOT-23 DBV 6 250 Green (RoHS & no Sb/Br) Call TI Level-1-260C-UNLIM Purchase Samples TPS3808G25DRVR ACTIVE SON DRV 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3808G25DRVRG4 ACTIVE SON DRV 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3808G25DRVT ACTIVE SON DRV 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples TPS3808G25DRVTG4 ACTIVE SON DRV 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples TPS3808G30DBVR ACTIVE SOT-23 DBV 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3808G30DBVRG4 ACTIVE SOT-23 DBV 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3808G30DBVT ACTIVE SOT-23 DBV 6 250 Green (RoHS & no Sb/Br) Addendum-Page 3 Call TI MSL Peak Temp Call TI Level-1-260C-UNLIM Level-1-260C-UNLIM Contact TI Distributor or Sales Office Contact TI Distributor or Sales Office PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 1-Jul-2010 Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish Call TI MSL Peak Temp (3) Samples (Requires Login) TPS3808G30DBVTG4 ACTIVE SOT-23 DBV 6 250 Green (RoHS & no Sb/Br) Level-1-260C-UNLIM Contact TI Distributor or Sales Office TPS3808G30DRVR ACTIVE SON DRV 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3808G30DRVRG4 ACTIVE SON DRV 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3808G30DRVT ACTIVE SON DRV 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor or Sales Office TPS3808G30DRVTG4 ACTIVE SON DRV 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor or Sales Office TPS3808G33DBVR ACTIVE SOT-23 DBV 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3808G33DBVRG4 ACTIVE SOT-23 DBV 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3808G33DBVT ACTIVE SOT-23 DBV 6 250 Green (RoHS & no Sb/Br) Call TI Level-1-260C-UNLIM Purchase Samples TPS3808G33DBVTG4 ACTIVE SOT-23 DBV 6 250 Green (RoHS & no Sb/Br) Call TI Level-1-260C-UNLIM Purchase Samples TPS3808G50DBVR ACTIVE SOT-23 DBV 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3808G50DBVRG4 ACTIVE SOT-23 DBV 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3808G50DBVT ACTIVE SOT-23 DBV 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples TPS3808G50DBVTG4 ACTIVE SOT-23 DBV 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Addendum-Page 4 PACKAGE OPTION ADDENDUM www.ti.com 1-Jul-2010 Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF TPS3808G01, TPS3808G12, TPS3808G18, TPS3808G30, TPS3808G33, TPS3808G50 : • Automotive: TPS3808G01-Q1, TPS3808G12-Q1, TPS3808G18-Q1, TPS3808G30-Q1, TPS3808G33-Q1, TPS3808G50-Q1 NOTE: Qualified Version Definitions: • Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects Addendum-Page 5 PACKAGE MATERIALS INFORMATION www.ti.com 20-Jul-2010 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) TPS3808G01DBVR SOT-23 DBV 6 3000 179.0 8.4 B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 3.2 3.2 1.4 4.0 8.0 Q3 TPS3808G01DBVT SOT-23 DBV 6 250 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 TPS3808G09DBVR SOT-23 DBV 6 3000 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 TPS3808G09DBVT SOT-23 DBV 6 250 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 TPS3808G125DBVR SOT-23 DBV 6 3000 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 TPS3808G125DBVT SOT-23 DBV 6 250 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 TPS3808G12DBVR SOT-23 DBV 6 3000 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 TPS3808G12DBVT SOT-23 DBV 6 250 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 TPS3808G15DBVR SOT-23 DBV 6 3000 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 TPS3808G15DBVT SOT-23 DBV 6 250 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 TPS3808G18DBVR SOT-23 DBV 6 3000 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 TPS3808G18DBVT SOT-23 DBV 6 250 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 TPS3808G19DBVR SOT-23 DBV 6 3000 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 TPS3808G19DBVT SOT-23 DBV 6 250 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 TPS3808G25DBVR SOT-23 DBV 6 3000 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 TPS3808G25DBVT SOT-23 DBV 6 250 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 TPS3808G30DBVR SOT-23 DBV 6 3000 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 TPS3808G30DBVT SOT-23 DBV 6 250 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 20-Jul-2010 Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) TPS3808G33DBVR SOT-23 DBV 6 3000 179.0 8.4 TPS3808G33DBVT SOT-23 DBV 6 250 179.0 8.4 TPS3808G50DBVR SOT-23 DBV 6 3000 179.0 TPS3808G50DBVT SOT-23 DBV 6 250 179.0 W Pin1 (mm) Quadrant 3.2 3.2 1.4 4.0 8.0 Q3 3.2 3.2 1.4 4.0 8.0 Q3 8.4 3.2 3.2 1.4 4.0 8.0 Q3 8.4 3.2 3.2 1.4 4.0 8.0 Q3 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TPS3808G01DBVR SOT-23 DBV 6 3000 203.0 203.0 35.0 TPS3808G01DBVT SOT-23 DBV 6 250 203.0 203.0 35.0 TPS3808G09DBVR SOT-23 DBV 6 3000 203.0 203.0 35.0 TPS3808G09DBVT SOT-23 DBV 6 250 203.0 203.0 35.0 TPS3808G125DBVR SOT-23 DBV 6 3000 203.0 203.0 35.0 TPS3808G125DBVT SOT-23 DBV 6 250 203.0 203.0 35.0 TPS3808G12DBVR SOT-23 DBV 6 3000 203.0 203.0 35.0 TPS3808G12DBVT SOT-23 DBV 6 250 203.0 203.0 35.0 TPS3808G15DBVR SOT-23 DBV 6 3000 203.0 203.0 35.0 TPS3808G15DBVT SOT-23 DBV 6 250 203.0 203.0 35.0 TPS3808G18DBVR SOT-23 DBV 6 3000 203.0 203.0 35.0 TPS3808G18DBVT SOT-23 DBV 6 250 203.0 203.0 35.0 TPS3808G19DBVR SOT-23 DBV 6 3000 203.0 203.0 35.0 Pack Materials-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 20-Jul-2010 Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TPS3808G19DBVT SOT-23 DBV 6 250 203.0 203.0 35.0 TPS3808G25DBVR SOT-23 DBV 6 3000 203.0 203.0 35.0 TPS3808G25DBVT SOT-23 DBV 6 250 203.0 203.0 35.0 TPS3808G30DBVR SOT-23 DBV 6 3000 203.0 203.0 35.0 TPS3808G30DBVT SOT-23 DBV 6 250 203.0 203.0 35.0 TPS3808G33DBVR SOT-23 DBV 6 3000 203.0 203.0 35.0 TPS3808G33DBVT SOT-23 DBV 6 250 203.0 203.0 35.0 TPS3808G50DBVR SOT-23 DBV 6 3000 203.0 203.0 35.0 TPS3808G50DBVT SOT-23 DBV 6 250 203.0 203.0 35.0 Pack Materials-Page 3 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DLP® Products www.dlp.com Communications and Telecom www.ti.com/communications DSP dsp.ti.com Computers and Peripherals www.ti.com/computers Clocks and Timers www.ti.com/clocks Consumer Electronics www.ti.com/consumer-apps Interface interface.ti.com Energy www.ti.com/energy Logic logic.ti.com Industrial www.ti.com/industrial Power Mgmt power.ti.com Medical www.ti.com/medical Microcontrollers microcontroller.ti.com Security www.ti.com/security RFID www.ti-rfid.com Space, Avionics & Defense www.ti.com/space-avionics-defense RF/IF and ZigBee® Solutions www.ti.com/lprf Video and Imaging www.ti.com/video Wireless www.ti.com/wireless-apps Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2010, Texas Instruments Incorporated