TEL: 852-26909605 FAX: 852-26909606 E-mail: [email protected] ! SURFACE MOUNT LED LAMPS GH-S170 Series Electro-Optical Characteristics: VF (V) IV(mcd) λ (nm) Code for parts Lighting Material GH-XXXXX Color typ max λD λP ∆λ typ RSS170TS-ESE RSS170TS-DPG OLS170TS-DPG OIS170TS-DPG AJS170TS-DPG ALS170TS-DPG YVS170TS-DPE YHS170TS-EPE GBS170TS-DPG GUS170TS-EPE GPS170TS-EPE GES170TS-IPG GGS170TS-IPG BJS170TS-JPH BVS170TS-EPC Red Red Orange Orange Amber Amber Yellow Yellow Green Green Green Green Green Blue Blue GaAlAs AlGaInP AlGaInP AlGaInP AlGaInP AlGaInP AlGaInP GaAsP AlGaInP GaP GaP InGaN InGaN InGaN GaN/SiC 1.80 1.90 1.90 1.90 1.90 1.90 2.00 2.10 2.10 2.25 2.20 3.20 3.30 3.40 4.00 2.30 2.40 2.40 2.40 2.40 2.40 2.50 2.50 2.60 2.70 2.70 3.80 4.00 4.00 4.50 643 631 624 615 605 595 593 587 578 572 573 527 509 465 465 660 640 634 620 610 598 594 586 575 567 567 525 505 460 430 25 23 25 18 25 20 32 37 18 32 30 40 37 68 60 Internal Circuit 19 52 67 75 52 75 57 7 37 17 15 120 120 36 8 ! Recommended Soldering Pattern For Reflow !Package Outline Drawing: Soldering ! Recommended Reflow Soldering Profile. NOTES: 1. All dimensions are in millimeters (inches); 2. Tolerance are ±0.1mm (0.004inch) unless otherwise noted; 3. Resin color: water clear. ! Soldering iron Basic spec is ! 5sec when 260. If temperature is higher, time should be shorter(+10" -1sec ).Power dissipation of iron should be smaller than 15W,and temperatures should be controllable .Surface temperature of the device should be under 230. !Absolute Maximum Ratings: Series IF(mA) GH-S170 Series 30 ! IFP(mA) VR (V) TOP(C) TST(C) 5 2080 20100 120 !Condition for I FP is pulse of 1/10 duty and 0.1msec width TEL: 852-26909605 FAX: 852-26909606 E-mail: [email protected] !Optical Characteristic Curves Of GH-S170 Series Relative Intensity vs. Wavelength Relative Intensity (%) % Wavelength (nm) Forward Current vs. Forward Voltage Relative Intensity vs. Forward Current 5.0 4.5 Relative Intensity (%) Forward Voltage (V) 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 0 5 10 15 20 25 30 Forward Current (mA) Directive Characteristics Forward Current (mA) TEL: 852-26909605 FAX: 852-26909606 E-mail: [email protected] !Tape AndReel Of GH-S170 Series USER DIRECTION OF FEED TOP COVER TAPE Dimensions per ANSI/EIA Standard RS-481 All dimensions are in millimeters (inches). A 180[7.09] B 60[2.36] C 13.5[0.53] W 8.4[0.33] Thickness of top cover tape 0.1[0.004”] MAX NOTES: 1. Empty component pockets are sealed with top cover tape; 2. Minimum leader length at both ends of the tape is450 mm; 3. The maximum number of missing lamps is two; 4. The cathode is oriented towards the tape sprocket hole in accordance with ANSI/EIA RS-481 specifications. 5. 3000pcs/Reel