RS401L THRU RS407L SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIERS Reverse Voltage – 50 to 1000 Volts Forward Current – 4.0 Amperes RS-4L Features • Ideal for printed circuit board • Surge overload rating: 200 amperes peak • Mounting position: Any • Weight:4.8 grams • Molded structure Absolute Maximum Ratings and Characteristics o Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Symbols RS RS RS RS RS RS RS 401L 402L 403L 404L 405L 406L 407L Units Maximum recurrent peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS bridge input voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Volts Maximum average forward output current O at TA = 75 C IO 4 Amps IFSM 200.0 Amps Maximum forward voltage drop per bridge element at 4A DC VF 1 Volts Typical junction Capacitance (Note) CJ 40 pF 10 µAmps IR 1 mAmps TJ ,TS -55 to +150 Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) Maximum reverse current at rated DC blocking voltage per element @TA = 25OC O @TA =100 C Operating and storage temperature range O Notes: (1) Measured at 1 MHz and applied reverse voltage of 4volts. SEMTECH ELECTRONICS LTD. ® (Subsidiary of Semtech International Holdings Limited, acompany listed on the Hong Kong Stock Exchange, Stock Code: 724) Dated : 23/06/2003 C RS401L THRU RS407L FIG.1-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 300 8.3 ms Single Half Sine-Wave (JEDEC Methode) 250 200 150 100 50 0 1 2 5 10 20 50 100 NUMBER OF CYCLES AT 60 Hz FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FORWARD OUTPUT CURRENT,(A) PEAK FORWARD SURGE CURRENT,(A) RATINGS AND CHARACTERISTIC CURVES (RS401L THRU RS407L) 5 4 3 2 1 0 0 150 FIG.4-TYPICAL REVERSE CHARACTERISTICS 10 100 Tj=25o C INSTANTANEOUS REVERSE CURRENT, (uA) INSTANTANEOUS FORWARD CURRENT,(A) 100 50 CASE TEMPERATURE. ( oC) FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 10 Pulse Width=300us 1% Duty Cycle 1 0.1 Single Phase Half Wave 60Hz Inductive or Resistive Load 0.6 0.8 1.0 1.2 1.4 1.6 1.8 INSTANTANEOUS FORWARD VOLTAGE,(V) Tj=100o C 1.0 0.1 Tj=25o C 0.01 0 2.0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) SEMTECH ELECTRONICS LTD. ® (Subsidiary of Semtech International Holdings Limited, acompany listed on the Hong Kong Stock Exchange, Stock Code: 724) Dated : 23/06/2003