60W Open Frame Single Output NAD-600X series Feature: l l l l 90 to 264Vac universal input range. UL/CUL, TUV, CB safety meet(approval). EMI/RFI meet VDE & FCC limit B. Low cost & compact size. l l 60Watts in127×76.2×44.1mm Size. 2 Year Warranty. Specifications: typical at nominal line, full load at 25 ° C. Input Specifications: General Specifications: Input voltage: 90 to 264Vac Efficiency: 75% typical at full load Input Frequency: 47 Hz to 63Hz Hold-up time: 15ms @ 115Vac full load Input inrush current: 20A at 115Vac 40A at 230Vac EMI/RFI: VDE & FCC Class B limits Dielectric Withstand: Input/output: 3000Vac Input/Ground: 1500Vac Earth leakage: 0.2mA max @ 115Vac 0.4mA max @ 230Vac Output Specifications: Output Rating: See Selection table Output Voltage Accuracy : ± 5% max. Line Regulation: ± 1% max. Load Regulation: ± 1% max. (Full to half load) Transient Response ± 1% max.dev. (Full to half load) 500uS recovery Temperature Coefficient: ± 0.04% / °C Ripple & Noise: 1% P-P max. ¬Safety Meet(Approval): UL/CUL UL60950 TUV EN60950 CB IEC950 Switching frequency: 20kHz(reference) Weight: 350g MTBF: 100,000hours(MIL-HDBK-217F) Environmental Specifications: Operating temperature: 0 to +50°C Storage temperature: -20 to +85°C Humidity: 5 to 95 % RH non-condensing Protections: b. Over voltage protection Vibration: 2.4G , 5 to 500Hz c. Over power protection Cooling: Free air convection d. Short circuit protection Note: 1. Vibration test: Three orthogonal axes, random vibration, 10 minutes for each axis. 2. Maximum output power is 60W. 3. At least 20% of load is required to obtain stable regulation. 4. Ripple & noise test method is measured at output terminal across a 0.1uF ceramic cap & a 10uF tantalum or electrolytic cap in parallel with a 20MHz bandwidth oscilloscope directly. ¬ Please refer the safety approval status on appendix 1, For latest safety approval status Please consult YCL or visit" www.ycl.com.tw" Date: Sep 19,2003 13 60W Open Frame Single Output NAD-600X series Model Selection Table: Output Voltage 5V 12V 3.3V Output Current Minimum 0mA 0mA 0mA Output Current Maximum 12A 5A 18A Model No. NAD-6001 NAD-6002 NAD-6005 Note: 1. Other output voltage versions available. Please Consult factory for details. Max. Power 60W 60W 60W Dimensions: mm ± 0.5mm DC Output Pin Functions Pin 1,2,3,4 +output Pin 5,6,7,8 COM DC output mating connector is Molex 09-65-2088, Ever 8673-08 or equivalent. l AC input mating connector is Molex 5096-03C, Ever 8673-05N2,4 or equivalent. l Date: Sep 19,2003 14