ETC PS9114

NEC's HIGH CMR, 10 Mbps
OPEN COLLECTOR OUTPUT TYPE
5-PIN SOP PHOTOCOUPLER
PS9114
FEATURES
DESCRIPTION
• HIGH COMMON MODE TRANSIENT IMMUNITY
CMH, CML = ±20 kV/µs TYP
NEC's PS9114 is an optically coupled high-speed, isolator
containing a GaAIAs LED on the input side and a photodiode
and a signal processing circuit on the output side on one chip.
• SMALL PACKAGE
5-pin SOP
• HIGH SPEED
10 Mbps
APPLICATIONS
• PULSE WIDTH DISTORTION
|tPHL – tPLH| = 3 ns TYP
• FACTORY AUTOMATION NETWORK
• HIGH ISOLATION VOLTAGE
BV = 2500 Vr.m.s.
• MOTOR DRIVE / INVERTER
• MEASUREMENT EQUIPMENT
• OPEN COLLECTOR OUTPUT
• AVAILABLE IN TAPE AND REEL
PS9114-F3, F4: 2500 pcs/reel
ELECTRICAL CHARACTERISTICS (TA = 0 to +85°C, Unless otherwise specified)
PART NUMBER
Coupled
Detector
Diode
SYMBOL
PS9114
PARAMETERS
UNITS
MIN
TYP1
MAX
1.4
1.65
1.9
VF
Forward Voltage, IF = 10 mA, TA = 25°C
V
IR
Reverse Current, VR = 3 V, TA = 25°C
µA
Ct
Capacitance, V = 0, f = 1 MHz, TA = 25°C
pF
30
IOH
High Level Output Current
Vcc = VO = 5.5 V, VF = 0.8 V
µA
0.02
250
VOL
Low Level Output Voltage2
Vcc = 5.5 V, IF = 5 mA, IOL = 13 mA
V
0.15
0.6
ICCH
High Level Supply Current, VCC = 5.5 V, IF = 0 mA
mA
3
8
ICCL
Low Level Supply Current, VCC = 5.5 V, IF = 10 mA
mA
7.0
11
IFHL
Threshhold Input Current, High → Low, VCC = 5 V, VO = 0.8V,
RL = 350 Ω
mA
2
5
RI-O
Isolation Resistance, VI-O = 1 k VDC, RH = 40 to 60%, TA = 25°C
Ω
CI-O
Isolation Capacitance, V = 0, f = 1 MHz, TA = 25°C
pF
0.6
3
10
1011
tPHL
Propagation Delay Time , High → Low
VCC = 5 V, RL = 350 Ω, IF = 7.5 mA
TA = 25°C
ns
54
75
100
tPLH
Propagation Delay Time3, Low → High
VCC = 5 V, RL = 350 Ω, IF = 7.5 mA
TA = 25°C
ns
51
75
100
tr
Rise Time, VCC = 5 V, RL = 350 Ω, IF = 7.5 mA
mA
20
tf
Fall Time, VCC = 5 V, RL = 350 Ω, IF = 7.5 mA
mA
10
Continued on next page
California Eastern Laboratories
PS9114
ELECTRICAL CHARACTERISTICS (TA = 0 to +85°C, Unless otherwise specified), Continued
PART NUMBER
SYMBOL
Coupled
| tPHL – tPLH |
PS9114
PARAMETERS
UNITS
Pulse Width Distortion, (PWD)3, VCC = 5 V, RL = 350 Ω, IF = 7.5 mA
MIN
ns
TYP
MAX
3
50
tPSK
Propagation Delay Skew, VCC = 5 V, RL = 350 Ω, IF = 7.5 mA
CMH
Common Mode Transient Immunity at High Level Output4,
VCC = 5 V, TA = 25°C, IF = 0 mA, VO (MIN) = 2 V, VCM = 1 kV
kV/µs
ns
10
20
60
CML
Common Mode Transient Immunity at Low Level Output4,
VCC = 5 V, TA = 25°C, IF = 7.5 mA, VO (MAX) = 0.8 V, VCM = 1 kV
kV/µs
10
20
Notes:
1. Typical values at TA = 25°C.
2. Because VOL of 2 V or more may be output when LED current input and when output supply of VCC = 2.6 V or less, it is important to confirm
the characteristics (operation with the power supply on and off) during design, before using this device..
3. Test Circuit for Propagation delay time
0.1 µ F
(PW = 1 µ s,
Duty cycle = 1/10)
Input
(Monitor)
(IF = 7.5 mA)
50%
Input
VCC = 5 V
Pulse input (IF)
RL = 350 Ω
VO (Monitor)
CL = 15 pF
Output
1.5 V
VOL
47 Ω
tPHL
tPLH
4.Test Circuit for common mode transient immunity
1 kV
VCM 90%
SW IF
VCC = 5 V
RL = 350 Ω
VO (Monitor)
CL = 15 pF
0.1 µ F
10%
0V
tr
tf
VO
(IF = 0 mA)
VCM
VOH
2V
0.8 V
VOL
VO
(IF = 7.5 mA)
Remark CL includes probe and stray wiring capacitance.
USAGE CAUTIONS
1. This device is ESD sensitive.
2. Bypass capacitor of more than 0.1 µF must be used between VCC
and GND within 10 mm of the device.
ABSOLUTE MAXIMUM
SYMBOLS
Diode
IF
VR
Detector
VCC
VO
IO
PC
Coupled
BV
TA
TSTG
RATINGS1 (TA = 25°C)
PARAMETERS
UNITS
RATINGS
Forward Current
Reverse Voltage
mA
V
30
5
Supply Voltage
Output Voltage
Output Current
Power Dissipation2
V
V
mA
mW
7
7
25
40
Vr.m.s.
°C
°C
2500
-40 to +85
-55 to +125
Voltage3
Isolation
Operating Temperature
Storage Temperature
Notes:
1. Operation in excess of any one of these parameters may result
in permanent damage.
2. Applies to output pin Vo. Reduced to 1.5 mW/°C at TA = 65°C or
more.
3. AC voltage for 1 minute at TA = 25 °C, RH = 60% between input
and output.
RECOMMENDED
OPERATING CONDITIONS
PART NUMBER
SYMBOLS
VFL
IFH
VCC
N
RL
PARAMETERS
Low Level Input Voltage
High Level Input Current
Supply Voltage
TTL(RL = 1kΩ loads)
Operating Temperature
PS9114
UNITS MIN TYP MAX
mA
0
0.8
mA
6.3 10 12.5
V
4.5 5.0 5.5
5
Ω
300
4k
ORDERING INFORMATION
PART
NUMBER
PS9114
PS9114-F3
PS9114-F4
PACKAGE
5-pin SOP
PACKAGE
STYLE
Magazine case
100 PCS
APPLIICATION
PART NUMBER*
PS9114
Embossed Tape
2500 pcs/reel
* For the application of the Safety Standard, following part number
should be used.
PS9114
TYPICAL PERFORMANCE CURVES
(TA = 25°C)
DETECTOR POWER DISSIPATION
vs. AMBIENT TEMPERATURE
MAXIMUM FORWARD CURRENT
vs. AMBIENT TEMPERATURE
50
Detector Power Dissipation, PC (mW)
Maximum Forward Current, IF (mA)
40
30
20
10
0
20
40
60
80
85
100
40
30
20
10
0
Ambient Temperature, TA (ºC)
High Level Supply Current, ICCH (µA),
Low Level Supply Current, ICCL (µA)
Forward Current, IF (mA)
80
85
100
12
10
TA = +85ºC
+50ºC
+25ºC
0ºC
-25ºC
1
0.1
1.2
1.4
1.6
1.8
2.0
2.2
10
8
ICCL (IF = 10 mA)
6
4
ICCH (IF = 0 mA)
2
0
-50
2.4
-25
0
25
50
75
100
Forward Voltage, VF (V)
Ambient Temperature, TA (ºC)
OUTPUT VOLTAGE vs.
INPUT CURRENT
LOW LEVEL OUTPUT VOLTAGE vs.
AMBIENT TEMPERATURE
0.6
6
Low Level Output Voltage, VOL (V)
VCC = 5.0 V,
TA = 25ºC
5
Output Voltage, VO (V)
60
SUPPLY CURRENT vs.
AMBIENT TEMPERATURE
100
RL = 350 Ω
4
1.0 kΩ
4.0 kΩ, 4.7 kΩ
3
2
1
0
40
Ambient Temperature, TA (ºC)
FORWARD CURRENT vs.
FORWARD VOLTAGE
0.01
1.0
20
1
2
3
4
Input Current, IF (mA)
5
6
IF = 5.0 mA,
VCC = 5.5 V
0.5
0.4
IOL = 16.0 mA
13.0 mA
0.3
10.0 mA
6.0 mA
0.2
0.1
0
-50
-25
0
25
50
75
Ambient Temperature, TA (ºC)
100
PS9114
TYPICAL PERFORMANCE CURVES
(TA = 25°C)
PROPAGATION DELAY TIME vs.
AMBIENT TEMPERATURE
THRESHOLD INPUT CURRENT vs.
AMBIENT TEMPERATURE
Propagation Delay Time, tPHL, tPLH (ns)
Threshold Input Current, IFHL (mA)
2.5
VCC = 5.0 V,
VO = 0.6 V
2.0
1.5
RL = 350 Ω
1.0
1.0 kΩ
4.7 kΩ, 4.0 kΩ
0.5
0
-50
-25
0
25
50
75
100
IF = 7.5 mA,
VCC = 5.0 V
80
tPLH: RL = 1.0 kΩ
tPLH: RL = 350 Ω
60
40
tPHL: RL = 350 Ω, 1.0 kΩ
20
0
-50
100
Ambient Temperature, TA (ºC)
tPLH: RL = 4.7 kΩ
100
tPLH: RL = 4.0 kΩ
80
tPHL: RL = 4.7 kΩ
tPHL: RL = 4.0 kΩ
40
20
0
-50
-25
0
25
50
75
75
IF = 7.5 mA,
VCC = 5.0 V
RL = 4.7 kΩ
4.0 kΩ
40
30
RL = 350 Ω
20
1.0 kΩ
10
0
-50
-25
0
25
50
75
Ambient Temperature, TA (ºC)
SWITCHING TIME vs.
AMBIENT TEMPERATURE
PROPAGATION DELAY TIME vs.
INPUT CURRENT
Propagation Delay Time, tPHL, tPLH (ns)
tr: RL = 4.0 kΩ, 4.7 kΩ
300
200
tr: RL = 1.0 kΩ
tr: RL = 350 Ω
tf: RL = 350 Ω, 1.0 kΩ,
4.0 kΩ, 4.7 kΩ
100
-25
0
25
50
75
Ambient Temperature, TA (ºC)
100
50
Ambient Temperature, TA (ºC)
IF = 7.5 mA,
VCC = 5.0 V
Switching Time, tr, tf (ns)
50
60
100
400
0
-50
25
PULSE WIDTH DISTORTION
vs. AMBIENT TEMPERATURE
Pulse Width Distortion | tPHL – tPLH | (ns)
Propagation Delay Time, tPHL, tPLH (ns)
120
60
0
Ambient Temperature, TA (ºC)
PROPAGATION DELAY TIME,
MAXIMUM PROPAGATION DELAYS
vs. FORWARD CURRENT
IF = 7.5 mA,
VCC = 5.0 V
-25
100
100
120
100
tPLH: RL = 4.0 kΩ
80
60
40
tPLH: RL = 1.0 kΩ
tPLH: RL = 350 Ω
20
0
5
tPHL: RL = 350 Ω, 1.0 kΩ,
4.0 kΩ
7
9
VCC = 5.0 V,
TA = 25ºC
11
Input Current, IF (mA)
13
15
PS9114
OUTLINE DIMENSIONS (Units in mm)
MARKING
PS9114
3.4 +0.3
-0.1
TOP VIEW
5
4
1. Anode
2. Cathode
3. GND
4. VO
5. VCC
1
2
0.1±0.1
2.6±0.2
0.15 +0.10
-0.05
4.4
0.4 +0.10
-0.05
No. 1 pin Mark
Initial of NEC
(Engraved mark)
Assembly Lot
N
N
7.0±0.3
1.27
9114
N234
3
2 34
Week Assembled
Year Assembled
(Last 1 Digit)
Rank Code
0.5±0.3
0.25 M
Life Support Applications
These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected
to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL
for all damages resulting from such improper use or sale.
09/10/2003
A Business Partner of NEC Compound Semiconductor Devices, Ltd.