DATA SHEET NEC's POWER AMPLIFIER FOR BLUETOOTH™ CLASS 1 UPG2301TQ FEATURES DESCRIPTION • OPERATION FREQUENCY fopt = 2,400 to 2,500 MHz (2 450 MHz TYP.) NEC's µPG2301TQ is a GaAs HBT MMIC for power amplifier for Bluetooth Class 1. • SUPPLY VOLTAGE VCC1, 2 = Vbias = 2.7 to 3.6 V (3.3 V TYP.) output power by using InGaP HBT. This device is housed in This device realizes high efficiency, high gain and high • CONTROL VOLTAGE Vcont = 0 to 3.6 V (2.5 V TYP.) Venable = 0 to 3.1 V (2.9 V TYP.) a low profile 10-pin plastic TSON package. • CIRCUIT CURRENT ICC = 120 mA TYP.@ VCC1, 2 = Vbias = 3.3 V, Vcont = 2.5 V, Venable = 2.9 V, Pin = +4 dBm • MAXIMUM POWER Pout(MAX.) = +23 dBm TYP.@ VCC1, 2 = Vbias = 3.3 V, Vcont = 2.5 V, Venable = 2.9 V, Pin = +4 dBm APPLICATION • GAIN CONTROL RANGE GCR = 23 dB TYP.@ VCC1, 2 = Vbias = 3.3 V, Vcont = 0 to 2.5 V, Venable = 2.9 V, Pin = +4 dBm • POWER AMPLIFIER FOR BLUETOOTH CLASS 1 • WIRELESS LAN • POWER GAIN GP = 23 dB TYP.(Reference value) • HIGH EFFICIENCY PAE = 50% TYP.(Reference value) • SHUT DOWN FUNCTION • HIGH-DENSITY SURFACE MOUNTING 10 pin plastic TSON package (2.4 × 2.55 × 0.6 mm) ELECTRICAL CHARACTERISTICS (Unless otherwise specified, TA = +25°C, VCC1, 2 = Vbias = 3.3 V, f = 2,450 MHz, External input and output matching) PARAMETER Circuit Current Shut Down Current SYMBOL ICC Ishut down Output Power 1 Pout1 Output Power 2 Pout2 Gain Control Range GCR TEST CONDITIONS Vcont = 2.5 V, Venable = 2.9 V, Pin = +4 dBm Vcont = 2.5 V, Venable = 0 V, Pin = +4 dBm Vcont = 2.5 V, Venable = 2.9 V, Pin = +4 dBm Vcont = 0 V, Venable = 2.9 V, Pin = +4 dBm Vcont = 0 to 2.5 V, Venable = 2.9 V, Pin = +4 dBm MIN. TYP. MAX. UNIT 110 120 130 mA − 0.1 1.0 µA +21 +23 +24.5 dBm − 0 +1 dBm 20 23 − dB MIN. TYP. MAX. UNIT − 50 − % − 23 − dB ELECTRICAL CHARACTERISTICS (Unless otherwise specified, TA = +25°C, VCC1, 2 = Vbias = 3.3 V, f = 2,450 MHz, External input and output matching) PARAMETER Efficiency Power Gain SYMBOL PAE GP TEST CONDITIONS Vcont = 2.5 V, Venable = 2.9 V, Pin = +4 dBm Vcont = 2.5 V, Venable = 2.9 V, Pin = −5 dBm California Eastern Laboratories UPG2301TQ ABSOLUTE MAXIMUM RATINGS RECOMMENDED OPERATING RANGE (TA = +25°C) PARAMETER SYMBOL RATINGS VCC1,2 Supply Voltage Vbias Vcont Control Voltage Venable Circuit Current ICC Icont Control Current Ienable UNIT PARAMETER SYMBOL fopt 5.0 V Operating Frequency 3.6 V Supply Voltage 400 mA 0.5 mA Power Dissipation PD 700 Note mW Operating Ambient Temperature TA −40 to +85 °C Storage Temperature Tstg −55 to +150 °C Input Power Pin +10 dBm Control Voltage VCC1,2 TYP. MAX. UNIT 2,400 2,450 MIN. 2,500 MHz V 2.7 3.3 3.6 Vcont 0 2.5 3.6 Venable 0 2.9 3.1 PIN NO. 1 OUTPUT/ VCC2 2 Venable Vbias Note Mounted on double copper-clad 50 × 50 × 1.6 mm epoxy glass PWB, TA = +85°C PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM Top View 10 9 8 7 Top View 6 10 9 8 7 Bottom View 6 6 7 8 9 10 Bias Circuit 2301 Bias Circuit 1 2 3 4 5 1 2 3 4 5 5 4 3 2 1 PIN NAME 3 Vbias 4 GND 5 VCC1 6 INPUT 7 Vcont 8 N.C. 9 GND 10 GND V UPG2301TQ ELEVALUATION CIRCUIT (VCC1, 2 = Vbias = 3.3 V, f = 2,450 MHz) Vcont INPUT 1 pF 10 9 8 7 6 4 5 1.8 nH Bias Circuit Bias Circuit 1,000 pF 1 2 3 OUTPUT VCC1 1 pF 15 nH 1,000 pF Vbias 1,000 pF 1,000 pF VCC2 Venable The application circuits and their parameters are for reference only and are not intended for use in actual design-ins. UPG2301TQ ILLUSTRATION OF THE TEST CIRCUIT ASSEMBLED ON EVALUATION BOARD Vds µ PG2301TQ HBT PA EC-Ver.2 10pin TSON Ven Vc1 Vc2 C2 C3 C1 C6 L2 C5 L1 C4 IN OUT Vct COMPONENT LIST SYMBOL RATING PART NUMBER MANUFACTURER 1,000 pF GRM39CH102J50 muRata 1 pF GRM39CH010C50 muRata L1 15 nH TFL0816-15N Susumu L2 1.8 nH TFL0816-1N8 Susumu C1, C3, C4, C5 C2, C6 UPG2301TQ TYPICAL CHARACTERLISTICS Condition : f = 2,450 MHz, VCC1 = VCC2 = Vbias = 3.3 V, Venable = 2.9 V, Pin = +4 dBm, External input and output matching 160 55 50 10 5 0 -5 0 140 PAE 45 40 35 30 25 20 15 120 ICC 100 80 Pout 60 40 Circuit Current ICC (mA) Output Power Pout (dBm), Efficiency PAE (%) OUTPUT POWER, EFFICIENCY, CIRCUIT CURRENT vs. CONTROL VOLTAGE 20 0.5 1.0 1.5 2.0 2.5 0 3.0 Control Voltage Vcont (V) Condition : f = 2,450 MHz, VCC1 = VCC2 = Vbias = 3.3 V, Venable = 2.9 V, Vcont = 2.5 V, External input and output matching 55 50 160 PAE 140 45 120 40 ICC 35 100 30 80 25 15 40 10 20 5 0 -15 -10 -5 0 +5 Input Power Pin (dBm) Remark 60 Pout 20 The graphs indicate nominal characteristics. +10 0 +15 Circuit Current ICC (mA) Output Power Pout (dBm), Efficiency PAE (%) OUTPUT POWER, EFFICIENCY, CIRCUIT CURRENT vs. INPUT POWER UPG2301TQ PACKAGE DIMENSIONS 10-PIN PLASTIC TSON (UNIT: mm) 0.18±0.05 (0.3) 2.20±0.1 (0.95) (Bottom View) (1.95) 2.25±0.1 2.55±0.15 0.40±0.05 (1.70) (0.35) (0.6 MAX.) (0.125) 2.40±0.15 Note () : Reference value ORDERING INFORMATION PART NUMBER µPG2301TQ-E1 PACKAGE 10-pin plastic TSON MARKING SUPPLYING FORM 2301 • Embossed tape 8 mm wide • Pin 5, 6 face the perforation side of the tape • Qty 3 kpcs/reel Remark To order evaluation samples, contact your nearby sales office. Part number for sample order: µPG2301TQ Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. 02/04/2004 A Business Partner of NEC Compound Semiconductor Devices, Ltd.