www.p-tec.net [email protected] Tel: Fax: (719) 589 3122 (719) 589 3592 PL03 Series 3mm (T1) LED Features Absolute Maximum Ratings at TA = 25 °C * Standard, Bi-Color and Low Current available *High Light Output *Flanged *Available in Color (CD), White Diffused (WD), Color Transparent (CT) and Water Clear (WC) *Available in PL301-03, PL30903, PL312, PL313 Right Angle Holder Reverse Voltage (<100 µA)..…………………...…………………………………………......……..4.0V Max Forward Current…………..………………..………………………………………….……20mA Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width)….……………………………………....100mA Operating Temperature Range………………………………………………………..-25°C to + 85°C Storage Temperature Range..………….……………………………………………...-25°C to +100°C Soldering Temperature (1.6mm below body)……………………………………………………....260° for 5 seconds Electrical & Optical Characteristics at TA = 25 °C Emitting Color Part Number Color Diffused White Diffused PL03-CDR24 PL03-CDR12 PL03-CDG13 PL03-CDG14 PL03-CDY01 PL03-CDA02 PL03-CDO12 PL03-WDR24 PL03-WDR12 PL03-WDG13 PL03-WDG14 PL03-WDY01 PL03-WDA02 PL03-WDO12 Color Transparent Water Clear PL03-CTR24 PL03-CTR12 PL03-CTG13 PL03-CTG14 PL03-CTY01 PL03-CTA02 PL03-CTO12 PL03-WCR24 PL03-WCR12 PL03-WCG13 PL03-WCG14 PL03-WCY01 PL03-WCA02 PL03-WCO12 Material Peak View Wave Angle Length 2θ ½ (nm) Bright Red Hi-Eff Red Green HI-Eff Green Yellow Amber Orange GaP GaAsP on GaP GaP GaP GaAsP on GaP GaAsP on GaP GaAsP on GaP Bright Red Hi-Eff Red Green HI-Eff Green Yellow Amber Orange GaP GaAsP on GaP GaP GaP GaAsP on GaP GaAsP on GaP GaAsP on GaP 5.1 Forward Voltage @20mA (V) Standard 5V Integrated 12V Integrated Resistor Resistor Deg Typ Max Typ Max Typ Max Typ Max Min Typ 700 635 567 567 585 610 635 56° 2.1 2.1 2.1 2.1 2.1 2.1 2.1 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 1.6 9.3 8.0 10.4 6.6 9.3 9.3 2.7 15.5 13.3 17.3 11.0 15.5 15.5 (nm) Deg Typ Max Typ Max Typ Max Typ Max Min Typ 36° 2.1 2.1 2.1 2.1 2.1 2.1 2.1 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 5.5 31.7 27.0 35.1 22.6 31.7 31.7 9.2 52.9 45.0 58.5 37.6 52.9 52.9 700 635 567 567 585 610 635 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 1.8 1.8 1.8 1.8 2.2 2.2 2.2 2.2 1.8 2.2 1.8 1.8 1.8 1.8 2.2 2.2 2.2 2.2 1.8 2.2 24.0Min. 3.0 4.1 Low Current (2mA) Luminous Intensity @20mA (mcd) 2.54±0.1 0.5 Square Anode 0.5±0.5 1.0 1.5typ. www.p-tec.net [email protected] Tel: Fax: (719) 589 3122 (719) 589 3592 PL03 Series 5 Volt 3mm (T1) LED Features Absolute Maximum Ratings at TA = 25 °C * Standard, Bi-Color and Low Current available *High Light Output *Flanged *Available in Color (CD), White Diffused (WD), Color Transparent (CT) and Water Clear (WC) *Available in PL301-03, PL30903, PL312, PL313 Right Angle Holder Reverse Voltage (<100 µA)..…………………...…………………………………………......……...5.0V Max Forward Current…………..………………..………………………………………….……20mA Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width)….……………………………………....100mA Operating Temperature Range………………………………………………………..-25°C to + 85°C Storage Temperature Range..………….……………………………………………...-25°C to +100°C Soldering Temperature (1.6mm below body)……………………………………………………....260° for 5 seconds Electrical & Optical Characteristics at TA = 25 °C Emitting Color Part Number Color Diffused White Diffused PL03-CDR24-5V PL03-CDR12-5V PL03-CDG13-5V PL03-CDG14-5V PL03-CDY01-5V PL03-CDA02-5V PL03-CDO12-5V PL03-WDR24-5V PL03-WDR12-5V PL03-WDG13-5V PL03-WDG14-5V PL03-WDY01-5V PL03-WDA02-5V PL03-WDO12-5V Color Transparent Water Clear PL03-CTR24-5V PL03-CTR12-5V PL03-CTG13-5V PL03-CTG14-5V PL03-CTY01-5V PL03-CTA02-5V PL03-CTO12-5V PL03-WCR24-5V PL03-WCR12-5V PL03-WCG13-5V PL03-WCG14-5V PL03-WCY01-5V PL03-WCA02-5V PL03-WCO12-5V Bright Red Hi-Eff Red Green HI-Eff Green Yellow Amber Orange Bright Red Hi-Eff Red Green HI-Eff Green Yellow Amber Orange Material GaP GaAsP on GaP GaP GaP GaAsP on GaP GaAsP on GaP GaAsP on GaP GaP GaAsP on GaP GaP GaP GaAsP on GaP GaAsP on GaP GaAsP on GaP Peak Wave Length View Angle 2θ ½ (nm) Deg Typ Max Min Typ 700 635 567 567 585 610 635 56° 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 1.6 9.3 8.0 10.4 6.6 9.3 9.3 2.7 15.5 13.3 17.3 11.0 15.5 15.5 (nm) Deg Typ Max Min Typ 36° 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 5.5 31.7 27.0 35.1 22.6 31.7 31.7 9.2 52.9 45.0 58.5 37.6 52.9 52.9 700 635 567 567 585 610 635 Forward Voltage @20mA (V) Luminous Intensity @20mA (mcd) All Dimensions are in Millimeters. Tolerance is ±0.25 mm unless otherwise specified. An epoxy meniscus may extend about 1 mm down the leads. 5.1 24.0Min. 3.0 4.1 2.54±0.1 0.5 Square Anode 0.5±0.5 1.0 1.5typ. www.p-tec.net [email protected] Tel: Fax: (719) 589 3122 (719) 589 3592 PL03 Series 12 Volt 3mm (T1) LED Features Absolute Maximum Ratings at TA = 25 °C * Standard, Bi-Color and Low Current available *High Light Output *Flanged *Available in Color (CD), White Diffused (WD), Color Transparent (CT) and Water Clear (WC) *Available in PL301-03, PL30903, PL312, PL313 Right Angle Holder Reverse Voltage (<100 µA)..…………………...…………………………………………......……...5.0V Max Forward Current…………..………………..………………………………………….……20mA Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width)….……………………………………....100mA Operating Temperature Range………………………………………………………..-25°C to + 85°C Storage Temperature Range..………….……………………………………………...-25°C to +100°C Soldering Temperature (1.6mm below body)……………………………………………………....260° for 5 seconds Electrical & Optical Characteristics at TA = 25 °C Emitting Color Part Number Color Diffused White Diffused PL03-CDR24-12V PL03-CDR12-12V PL03-CDG13-12V PL03-CDG14-12V PL03-CDY01-12V PL03-CDA02-12V PL03-CDO12-12V PL03-WDR24-12V PL03-WDR12-12V PL03-WDG13-12V PL03-WDG14-12V PL03-WDY01-12V PL03-WDA02-12V PL03-WDO12-12V Color Transparent Water Clear PL03-CTR24-12V PL03-CTR12-12V PL03-CTG13-12V PL03-CTG14-12V PL03-CTY01-12V PL03-CTA02-12V PL03-CTO12-12V PL03-WCR24-12V PL03-WCR12-12V PL03-WCG13-12V PL03-WCG14-12V PL03-WCY01-12V PL03-WCA02-12V PL03-WCO12-12V Bright Red Hi-Eff Red Green HI-Eff Green Yellow Amber Orange Bright Red Hi-Eff Red Green HI-Eff Green Yellow Amber Orange Material GaP GaAsP on GaP GaP GaP GaAsP on GaP GaAsP on GaP GaAsP on GaP GaP GaAsP on GaP GaP GaP GaAsP on GaP GaAsP on GaP GaAsP on GaP Luminous Intensity @20mA (mcd) Peak Wave Length View Angle 2θ ½ (nm) Deg Typ Max Min Typ 700 635 567 567 585 610 635 56° 12.0 12.0 12.0 12.0 12.0 12.0 12.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 1.6 9.3 8.0 10.4 6.6 9.3 9.3 2.7 15.5 13.3 17.3 11.0 15.5 15.5 (nm) Deg Typ Max Min Typ 36° 12.0 12.0 12.0 12.0 12.0 12.0 12.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 5.5 31.7 27.0 35.1 22.6 31.7 31.7 9.2 52.9 45.0 58.5 37.6 52.9 52.9 700 635 567 567 585 610 635 Forward Voltage @20mA (V) All dimensions are in Millimeters. Tolerance is ±0.25 mm unless otherwise specified. An epoxy meniscus may extend about 1 mm down the leads. 5.1 24.0Min. 3.0 4.1 2.54±0.1 0.5 Square Anode 0.5±0.5 1.0 1.5typ. www.p-tec.net [email protected] Tel: Fax: (719) 589 3122 (719) 589 3592 PL03 Series Low Current 3mm (T1) LED Features Absolute Maximum Ratings at TA = 25 °C * Standard and Bi-Color Available *High Light Output *Flanged *Available in Color (CD), White Diffused (WD), Color Transparent (CT) and Water Clear (WC) *Available in PL301-03, PL30903, PL312, PL313 Right Angle Holder Reverse Voltage (<100 µA)..…………………...…………………………………………......……..4.0V Max Forward Current…………..………………..………………………………………….……20mA Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width)….……………………………………....100mA Operating Temperature Range………………………………………………………..-25°C to + 85°C Storage Temperature Range..………….……………………………………………...-25°C to +100°C Soldering Temperature (1.6mm below body)……………………………………………………....260° for 5 seconds Electrical & Optical Characteristics at TA = 25 °C Part Number Emitting Color Color Diffused White Diffused PL03-CDR12-LC PL03-CDG13-LC PL03-CDY01-LC PL03-CDO12-LC PL03-WDR12-LC PL03-WDG13-LC PL03-WDY01-LC PL03-WDO12-LC Color Transparent Water Clear PL03-CTR12-LC PL03-CTG13-LC PL03-CTY01-LC PL03-CTO12-LC PL03-WCR12-LC PL03-WCG13-LC PL03-WCY01-LC PL03-WCO12-LC Hi-Eff Red Green Yellow Orange Hi-Eff Red Green Yellow Orange Material GaAsP on GaP GaP GaAsP on GaP GaAsP on GaP GaAsP on GaP GaP GaAsP on GaP GaAsP on GaP Peak Wave Length View Angle 2θ ½ Forward Voltage @2mA (V) Luminous Intensity @2mA (mcd) (nm) Deg Typ Max Min Typ 635 567 585 635 56° 1.8 1.8 1.8 1.8 2.2 2.2 2.2 2.2 1.0 0.9 0.7 1.0 1.7 1.5 1.2 1.7 (nm) Deg Typ Max Min Typ 36° 1.8 1.8 1.8 1.8 2.2 2.2 2.2 2.2 3.5 3.0 2.5 3.5 5.9 5.0 4.2 5.9 635 567 585 635 All Dimensions are in Millimeters . Tolerance is ±0.25 mm unless otherwise specified. An Epoxy meniscus may extend about 1 mm do wn the leads. 5.1 24.0Min. 3.0 4.1 2.54±0.1 0.5 Square Anode 0.5±0.5 1.0 1.5typ. www.p-tec.net [email protected] Tel: Fax: (719) 589 3122 (719) 589 3592 PL03 Series 3mm (T1) Flashing LED Features Absolute Maximum Ratings at TA = 25 °C * Standard, Bi-Color and Low Current available *High Light Output *Flanged *Available in Color, White Diffused (WD), Color Transparent (CT), and Water Clear (WC) *Available in PL301-03,PL312 PL309-03 Right Angle Holder Reverse Voltage (<100 µA)..…………………...…………………………………………….……....5.0V Max Forward Current…………..………………..………………………………………….……30mA Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width)….……………………………………....100mA Operating Temperature Range…………………………………………………….….-25°C to + 85°C Storage Temperature Range..………….……………………………………………...-25°C to +100°C Soldering Temperature (1.6mm below body)……………………………………………………. ..260° for 5 seconds Electrical & Optical Characteristics at TA = 25 °C Part Number Emitting Color Material Color Diffused Peak View Wave Angle Length 2θ ½ (nm) PL03-CDRF12 PL03-CDRF21 PL03-CDGF13 PL03-CDYF01 PL03-CDOF12 Hi-Eff Red Super Bright Red Green Yellow Orange GaAsP on GaP GaAlAs on GaAs GaP GaAsP on GaP GaAsP on GaP 635 660 567 585 635 Forward Voltage @20mA (V) Luminous Intensity @20mA (mcd) Deg Typ Max Min Typ 78° 3.0 3.0 3.0 3.0 3.0 1.7 17.1 1.5 1.3 1.7 2.9 28.5 2.5 2.1 2.9 5.0 5.0 5.0 5.0 5.0 All dimensions are in Millimeters. Tolerance is ±0.25 (Leads ±0.1) Unless otherwise specified. An epoxy meniscus may extend 1mm down the leads. 5.1 24.0Min. 3.0 4.1 2.54±0.1 0.5 Square Anode 0.5±0.5 1.0 1.5typ.