MICROCHIP PIC12HV615

PIC12F615/12HV615
PIC16F616/16HV616
8/14-Pin, 8-Bit Flash Microcontroller Product Brief
High-Performance RISC CPU:
• Only 35 single-word instructions to learn
• All single-cycle instructions except for program
branches which are two-cycle
• Eight-level deep hardware stack
• Direct, Indirect and Relative Addressing modes
for data and instructions
• Operating speed:
- DC – 20 MHz clock input
- DC – 200 ns instruction cycle
Special Microcontroller Features:
• Precision Internal Oscillator:
- Selectable 4 MHz or 8 MHz frequency
- Factory calibrated to ±1%
• Power-Saving Sleep mode
• Power-on Reset (POR)
• Power-up Timer (PWRT) and Oscillator Start-up
Timer (OST)
• Brown-out Reset (BOR)
• Watchdog Timer (WDT) with dedicated on-chip
RC oscillator for reliable operation
• Multiplexed MCLR input pin with internal pull-up
• Programmable code protection
• Selectable oscillator options:
- INTOSC: Precision internal oscillator
- EXTRC: External low-cost RC oscillator
- XT: Standard crystal/resonator
- HS: High-speed crystal/resonator
- LP: Power-saving, low frequency crystal
- EC: High-speed external clock input
• In-Circuit Serial Programming™ (ICSP™)
• In-Circuit Debugging (ICD) support
• Programmable Interrupt-on-Change pins
Low-Power Features/CMOS Technology:
• Operating current:
- 100 μA @ 2V, 1 MHz, typical
• Standby current:
- 1 nA @ 2V, typical
• Low-power, high-speed Flash technology:
- 100,000 Flash endurance
- > 40-year retention
© 2005 Microchip Technology Inc.
• Fully static design
• Wide operating voltage range:
- 2.0V-5.5V for PIC12F615 and PIC16F616
- 2.0V – user defined maximum voltage for
PIC12HV615 and PIC16HV616
• Wide temperature range:
- Industrial: -40°C to +85°C
- Extended: -40°C to +125°C
Peripheral Features:
• I/O pins:
- 5 I/O pins with individual direction control
(PIC12F615, PIC12HV615)
- 11 I/O pins with individual direction control
(PIC16F616, PIC16HV616)
- 1 input only pin
- Individually selectable weak pull-ups
- High current sink/source for direct LED drive
• Analog-to-Digital (A/D) Converter:
- 10-bit resolution
- 4 external channels (PIC12F615,
PIC12HV615)
- 8 external channels (PIC16F616,
PIC16HV616)
- 3 internal channels to convert internal voltage
references
• Analog Comparator:
- One comparator (PIC12F615, PIC12HV615)
- Two comparators (PIC16F616,
PIC16HV616)
- Comparator inputs and output accessible
externally
- On-chip 0.6V absolute voltage reference
- Programmable on-chip voltage reference
(CVREF) module (% of VDD)
• Timer0 module: 8-bit timer/counter with 8-bit
programmable prescaler
• Enhanced Timer1 module:
- 16-bit timer/counter with prescaler
- External gate input
- Option to use OSC1/OSC2 input in LP mode
as Timer1 oscillator when in INTOSC mode
- Option to use system clock source as Timer1
clock input
- Timer2 module: 8-bit timer/counter with 8-bit
prescaler and postscaler
Advance Information
DS41272B-page 1
PIC12F615/12HV615 PIC16F616/16HV616
• Enhanced Capture Compare/PWM module
(ECCP):
- 16-bit capture maximum resolution 12.5 ns
- Compare maximum resolution 200 ns
FIGURE 1:
- 10-bit PWM maximum frequency 20 kHz
- User selectable PWM output on primary or
alternate pins. (Alternate pin selection
PIC12HV615 only)
PIN DIAGRAMS
VDD
1
GP5/CLKIN/P1A(1)/T1CKIN/OSC1
2
GP4/AN3/T1G/P1B(1)/OSC2
3
GP3/T1G(1)/MCLR/VPP
4
PIC12F615
PDIP/SOIC
8
VSS
7
GP0/AN0/C1IN+/P1B/ICSPDAT
6
GP1/AN1/C1IN-/VREF/ICSPCLK
5
GP2/AN2/T0CKI/INT/C1OUT/CCP1/P1A
PDIP, SOIC, TSSOP, QFN
1
14
VSS
2
13
RA0/AN0/C1IN+/ICSPDAT
RA4/AN3/T1G/OSC2
3
12
RA1/AN1/C1IN-/VREF/ICSPCLK
11
RA2/AN2/T0CKI/INT/C1OUT
10
RC0/AN4/C2IN+
6
9
RC1/AN5/C2IN-
RC3/AN7/P1C
7
8
RC2/AN6/P1D
3
RC5
4
13
5
6
12
RA0
11
RA1
10
RA2
9
RC0
7
8
RC1
RA3
14
RC2
2
15
PIC16F616
RA4
16
RC3
1
RC4
RA5
GND
RC4/C2OUT/P1B
NC
5
NC
4
VDD
RA3/MCLR/VPP
RC5/CCP1/P1A
QFN(2)
Note 1:
2:
PIC16F616
VDD
RA5/T1CKIN/OSC1/CLKIN
Alternate pin function.
Reference DIP package for complete pin descriptions.
Program Memory
Data
Memory
Flash Words
SRAM
(bytes)
PIC12F615
1024 x 14
PIC16F616
PIC12HV615
PIC16HV616
I/O
Timers
8/16 bit
10-bit A/D
Channels
Comparators
Voltage
Regulator
64
6
2/1
4
1
N
2048 x 14
128
12
2/1
8
2
N
1024 x 14
64
6
2/1
4
1
Y
2048 x 14
128
12
2/1
8
2
Y
Device
DS41272B-page 2
Advance Information
© 2005 Microchip Technology Inc.
Note the following details of the code protection feature on Microchip devices:
•
Microchip products meet the specification contained in their particular Microchip Data Sheet.
•
Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the
intended manner and under normal conditions.
•
There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our
knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data
Sheets. Most likely, the person doing so is engaged in theft of intellectual property.
•
Microchip is willing to work with the customer who is concerned about the integrity of their code.
•
Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not
mean that we are guaranteeing the product as “unbreakable.”
Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our
products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts
allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.
Information contained in this publication regarding device
applications and the like is provided only for your convenience
and may be superseded by updates. It is your responsibility to
ensure that your application meets with your specifications.
MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED,
WRITTEN OR ORAL, STATUTORY OR OTHERWISE,
RELATED TO THE INFORMATION, INCLUDING BUT NOT
LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE,
MERCHANTABILITY OR FITNESS FOR PURPOSE.
Microchip disclaims all liability arising from this information and
its use. Use of Microchip’s products as critical components in
life support systems is not authorized except with express
written approval by Microchip. No licenses are conveyed,
implicitly or otherwise, under any Microchip intellectual property
rights.
Trademarks
The Microchip name and logo, the Microchip logo, Accuron,
dsPIC, KEELOQ, microID, MPLAB, PIC, PICmicro, PICSTART,
PRO MATE, PowerSmart, rfPIC, and SmartShunt are
registered trademarks of Microchip Technology Incorporated
in the U.S.A. and other countries.
AmpLab, FilterLab, Migratable Memory, MXDEV, MXLAB,
PICMASTER, SEEVAL, SmartSensor and The Embedded
Control Solutions Company are registered trademarks of
Microchip Technology Incorporated in the U.S.A.
Analog-for-the-Digital Age, Application Maestro, dsPICDEM,
dsPICDEM.net, dsPICworks, ECAN, ECONOMONITOR,
FanSense, FlexROM, fuzzyLAB, In-Circuit Serial
Programming, ICSP, ICEPIC, Linear Active Thermistor,
MPASM, MPLIB, MPLINK, MPSIM, PICkit, PICDEM,
PICDEM.net, PICLAB, PICtail, PowerCal, PowerInfo,
PowerMate, PowerTool, Real ICE, rfLAB, rfPICDEM, Select
Mode, Smart Serial, SmartTel, Total Endurance, UNI/O,
WiperLock and Zena are trademarks of Microchip Technology
Incorporated in the U.S.A. and other countries.
SQTP is a service mark of Microchip Technology Incorporated
in the U.S.A.
All other trademarks mentioned herein are property of their
respective companies.
© 2005, Microchip Technology Incorporated, Printed in the
U.S.A., All Rights Reserved.
Printed on recycled paper.
Microchip received ISO/TS-16949:2002 quality system certification for
its worldwide headquarters, design and wafer fabrication facilities in
Chandler and Tempe, Arizona and Mountain View, California in
October 2003. The Company’s quality system processes and
procedures are for its PICmicro® 8-bit MCUs, KEELOQ® code hopping
devices, Serial EEPROMs, microperipherals, nonvolatile memory and
analog products. In addition, Microchip’s quality system for the design
and manufacture of development systems is ISO 9001:2000 certified.
© 2005 Microchip Technology Inc.
Advance Information
DS41272B-page 3
WORLDWIDE SALES AND SERVICE
AMERICAS
ASIA/PACIFIC
ASIA/PACIFIC
EUROPE
Corporate Office
2355 West Chandler Blvd.
Chandler, AZ 85224-6199
Tel: 480-792-7200
Fax: 480-792-7277
Technical Support:
http://support.microchip.com
Web Address:
www.microchip.com
Australia - Sydney
Tel: 61-2-9868-6733
Fax: 61-2-9868-6755
India - Bangalore
Tel: 91-80-2229-0061
Fax: 91-80-2229-0062
China - Beijing
Tel: 86-10-8528-2100
Fax: 86-10-8528-2104
India - New Delhi
Tel: 91-11-5160-8631
Fax: 91-11-5160-8632
Austria - Wels
Tel: 43-7242-2244-399
Fax: 43-7242-2244-393
Denmark - Copenhagen
Tel: 45-4450-2828
Fax: 45-4485-2829
China - Chengdu
Tel: 86-28-8676-6200
Fax: 86-28-8676-6599
India - Pune
Tel: 91-20-2566-1512
Fax: 91-20-2566-1513
France - Paris
Tel: 33-1-69-53-63-20
Fax: 33-1-69-30-90-79
China - Fuzhou
Tel: 86-591-8750-3506
Fax: 86-591-8750-3521
Japan - Yokohama
Tel: 81-45-471- 6166
Fax: 81-45-471-6122
Germany - Munich
Tel: 49-89-627-144-0
Fax: 49-89-627-144-44
China - Hong Kong SAR
Tel: 852-2401-1200
Fax: 852-2401-3431
Korea - Gumi
Tel: 82-54-473-4301
Fax: 82-54-473-4302
China - Qingdao
Tel: 86-532-8502-7355
Fax: 86-532-8502-7205
Korea - Seoul
Tel: 82-2-554-7200
Fax: 82-2-558-5932 or
82-2-558-5934
Atlanta
Alpharetta, GA
Tel: 770-640-0034
Fax: 770-640-0307
Boston
Westborough, MA
Tel: 774-760-0087
Fax: 774-760-0088
Chicago
Itasca, IL
Tel: 630-285-0071
Fax: 630-285-0075
Dallas
Addison, TX
Tel: 972-818-7423
Fax: 972-818-2924
Detroit
Farmington Hills, MI
Tel: 248-538-2250
Fax: 248-538-2260
Kokomo
Kokomo, IN
Tel: 765-864-8360
Fax: 765-864-8387
Los Angeles
Mission Viejo, CA
Tel: 949-462-9523
Fax: 949-462-9608
San Jose
Mountain View, CA
Tel: 650-215-1444
Fax: 650-961-0286
China - Shanghai
Tel: 86-21-5407-5533
Fax: 86-21-5407-5066
China - Shenyang
Tel: 86-24-2334-2829
Fax: 86-24-2334-2393
China - Shenzhen
Tel: 86-755-8203-2660
Fax: 86-755-8203-1760
China - Shunde
Tel: 86-757-2839-5507
Fax: 86-757-2839-5571
China - Wuhan
Tel: 86-27-5980-5300
Fax: 86-27-5980-5118
China - Xian
Tel: 86-29-8833-7250
Fax: 86-29-8833-7256
Malaysia - Penang
Tel: 60-4-646-8870
Fax: 60-4-646-5086
Philippines - Manila
Tel: 63-2-634-9065
Fax: 63-2-634-9069
Italy - Milan
Tel: 39-0331-742611
Fax: 39-0331-466781
Netherlands - Drunen
Tel: 31-416-690399
Fax: 31-416-690340
Spain - Madrid
Tel: 34-91-708-08-90
Fax: 34-91-708-08-91
UK - Wokingham
Tel: 44-118-921-5869
Fax: 44-118-921-5820
Singapore
Tel: 65-6334-8870
Fax: 65-6334-8850
Taiwan - Hsin Chu
Tel: 886-3-572-9526
Fax: 886-3-572-6459
Taiwan - Kaohsiung
Tel: 886-7-536-4818
Fax: 886-7-536-4803
Taiwan - Taipei
Tel: 886-2-2500-6610
Fax: 886-2-2508-0102
Thailand - Bangkok
Tel: 66-2-694-1351
Fax: 66-2-694-1350
Toronto
Mississauga, Ontario,
Canada
Tel: 905-673-0699
Fax: 905-673-6509
10/31/05
DS41272B-page 4
Advance Information
© 2005 Microchip Technology Inc.