TI SN74AUP1G240DBVR

SN74AUP1G240
LOW-POWER SINGLE BUFFER/DRIVER
WITH 3-STATE OUTPUT
www.ti.com
SCES627A – MARCH 2005 – REVISED AUGUST 2006
FEATURES
•
•
•
•
•
•
•
•
•
•
•
Available in the Texas Instruments
NanoStar™ and NanoFree™ Packages
Low Static-Power Consumption
– ICC = 0.9 µA Max
Low Dynamic-Power Consumption
– Cpd = 4.2 pF at 3.3 V Typ
Low Input Capacitance
– CI = 1.5 pF Typ
Low Noise – Overshoot and Undershoot
<10% of VCC
Input-Disable Feature Allows Floating Input
Conditions
Ioff Supports Partial Power-Down-Mode
Operation
Input Hysteresis Allows Slow Input Transition
and Better Switching Noise Immunity at the
Input
DBV PACKAGE
(TOP VIEW)
OE
A
2
GND
3
•
•
DCK PACKAGE
(TOP VIEW)
OE
1
A
2
GND
3
VCC
5
1
•
•
•
Wide Operating VCC Range of 0.8 V to 3.6 V
Optimized for 3.3-V Operation
3.6-V I/O Tolerant to Support Mixed-Mode
Signal Operation
tpd = 4.1 ns Max at 3.3 V
Suitable for Point-to-Point Applications
Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
ESD Performance Tested Per JESD 22
– 2000-V Human-Body Model
(A114-B, Class II)
– 200-V Machine Model (A115-A)
– 1000-V Charged-Device Model (C101)
ESD Protection Exceeds ±5000 V With
Human-Body Model
YEP OR YZP PACKAGE
(BOTTOM VIEW)
GND
VCC
5
Y
3 4
A
2
OE
VCC
1 5
Y
4
Y
4
See mechanical drawings for dimensions.
DESCRIPTION/ORDERING INFORMATION
The AUP family is TI's premier solution to the industry's low power needs in battery-powered portable
applications. This family ensures a very low static and dynamic power consumption across the entire VCC range
of 0.8 V to 3.6 V, resulting in an increased battery life. This product also maintains excellent signal integrity (see
Figure 1 and Figure 2).
Static-Power Consumption
(mA)
Switching Characteristics
Dynamic-Power Consumption
(pF)
100%
100%
80%
80%
at 25 MHz
†
3.5
60%
60%
3.3-V
†
Logic
40%
40%
Voltage - V
3
3.3-V
LVC †
Logic
2.5
Input
2
1.5
1
Output
0.5
20%
20%
AUP
0%
†
0%
AUP
Single, dual, and triple gates.
Figure 1. AUP – The Lowest-Power Family
0
-0.5
0
†
5
10
15
20 25
Time - ns
30
35
40
45
AUP1G08 data at CL = 15 pF.
Figure 2. Excellent Signal Integrity
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
NanoStar, NanoFree are trademarks of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2005–2006, Texas Instruments Incorporated
SN74AUP1G240
LOW-POWER SINGLE BUFFER/DRIVER
WITH 3-STATE OUTPUT
www.ti.com
SCES627A – MARCH 2005 – REVISED AUGUST 2006
DESCRIPTION/ORDERING INFORMATION (CONTINUED)
This buffer/driver is a single line driver with a 3-state output. The output is disabled when the output-enable (OE)
input is high. This device has the input-disable feature, which allows floating input signals.
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup
resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
NanoStar™ and NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the
die as the package.
This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs,
preventing damaging current backflow through the device when it is powered down.
ORDERING INFORMATION
TA
–40°C to 85°C
(1)
(2)
PACKAGE (1)
NanoStar™ – WCSP (DSBGA)
0.23-mm large bump – YEP
Reel of 3000
SN74AUP1G240YEPR
NanoFree™ – WCSP (DSBGA)
0.23-mm large bump – YZP
(Pb-free)
Reel of 3000
SN74AUP1G240YZPR
SOT (SOT-23) – DBV
Reel of 3000
SN74AUP1G240DBVR
H40_
SOT (SC-70) – DCK
Reel of 3000
SN74AUP1G240DCKR
HK_
_ _ _HK_
Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
DBV/DCK: The actual top-side marking has one additional character that designates the assembly/test site.
YEP/YZP: The actual top-side marking has three preceding characters to denote year, month, and sequence code, and one following
character to designate the assembly/test site. Pin 1 identifier indicates solder-bump composition (1 = SnPb, • = Pb-free).
FUNCTION TABLE
INPUTS
(1)
OE
A
OUTPUT
Y
L
H
L
L
L
H
H
X (1)
Z
Floating inputs allowed.
LOGIC DIAGRAM (POSITIVE LOGIC)
1
OE
2
4
A
2
TOP-SIDE MARKING (2)
ORDERABLE PART NUMBER
Y
Submit Documentation Feedback
SN74AUP1G240
LOW-POWER SINGLE BUFFER/DRIVER
WITH 3-STATE OUTPUT
www.ti.com
SCES627A – MARCH 2005 – REVISED AUGUST 2006
Absolute Maximum Ratings
(1)
over operating free-air temperature range (unless otherwise noted)
MIN
MAX
VCC
Supply voltage range
–0.5
4.6
V
VI
Input voltage range (2)
–0.5
4.6
V
–0.5
4.6
V
–0.5
VCC + 0.5
state (2)
UNIT
VO
Voltage range applied to any output in the high-impedance or power-off
VO
Output voltage range in the high or low state (2)
IIK
Input clamp current
VI < 0
–50
mA
IOK
Output clamp current
VO < 0
–50
mA
IO
Continuous output current
±20
mA
Continuous current through VCC or GND
±50
mA
θJA
Package thermal impedance (3)
Tstg
(1)
(2)
(3)
DBV package
206
DCK package
252
YEP/YZP package
132
Storage temperature range
–65
150
V
°C/W
°C
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.
The package thermal impedance is calculated in accordance with JESD 51-7.
Recommended Operating Conditions (1)
VCC
Supply voltage
VCC = 0.8 V
VIH
High-level input voltage
VCC = 1.1 V to 1.95 V
VCC = 2.3 V to 2.7 V
VCC = 3 V to 3.6 V
MIN
MAX
0.8
3.6
VCC
3.6
0.65 × VCC
3.6
1.6
3.6
2
3.6
VCC = 0.8 V
VIL
Low-level input voltage
VO
Output voltage
∆t/∆v
Input transition rise or fall rate
TA
Operating free-air temperature
(1)
UNIT
V
V
0
VCC = 1.1 V to 1.95 V
0 0.35 × VCC
VCC = 2.3 V to 2.7 V
0
VCC = 3 V to 3.6 V
0
0.9
Active state
0
VCC
3-state
0
3.6
VCC = 0.8 V to 3.6 V
–40
0.7
V
V
200
ns/V
85
°C
The A data input pins may be floated if the OE is high and the outputs are disabled; otherwise, all unused inputs of the device must be
held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs,
literature number SCBA004.
Submit Documentation Feedback
3
SN74AUP1G240
LOW-POWER SINGLE BUFFER/DRIVER
WITH 3-STATE OUTPUT
www.ti.com
SCES627A – MARCH 2005 – REVISED AUGUST 2006
Electrical Characteristics
over recommended operating free-air temperature range (unless otherwise noted)
PARAMETER
VOH
TEST CONDITIONS
MIN
VCC – 0.1
IOH = –1.1 mA
1.1 V
0.75 × VCC
0.7 × VCC
IOH = –1.7 mA
1.4 V
1.11
1.03
IOH = –1.9 mA
1.65 V
1.32
1.3
2.05
1.97
1.9
1.85
2.72
2.67
IOH = –4 mA
2.3 V
3V
IOL = 20 µA
0.8 V to 3.6 V
IOL = 1.1 mA
2.6
MAX
UNIT
V
2.55
0.1
0.1
1.1 V
0.3 × VCC
0.3 × VCC
IOL = 1.7 mA
1.4 V
0.31
0.37
IOL = 1.9 mA
1.65 V
0.31
0.35
0.31
0.33
0.44
0.45
0.31
0.33
0.44
0.45
0 V to 3.6 V
0.1
0.5
µA
IOL = 2.3 mA
IOL = 3.1 mA
IOL = 2.7 mA
IOL = 4 mA
VI = GND to 3.6 V
2.3 V
3V
V
Ioff
VI or VO = 0 V to 3.6 V
0V
0.2
0.6
µA
∆Ioff
VI or VO = 0 V to 3.6 V
0 V to 0.2 V
0.2
0.6
µA
IOZ
VO = VCC or GND
3.6 V
0.1
0.5
µA
ICC
VI = GND or (VCC to 3.6 V),
OE = GND, IO = 0
0.8 V to 3.6 V
0.5
0.9
µA
40
50
110
120
0
0
A input
∆ICC
VI = VCC – 0.6 V, (1)
IO = 0
3.3 V
All inputs VI = GND to 3.6 V, OE = VCC (2)
0.8 V to 3.6 V
OE input
CI
VI = VCC or GND
Co
VO = VCC or GND
(1)
(2)
4
TA = –40°C to 85°C
MAX
VCC – 0.1
IOH = –2.7 mA
II
TYP
0.8 V to 3.6 V
IOH = –3.1 mA
A or OE
input
TA = 25°C
MIN
IOH = –20 µA
IOH = –2.3 mA
VOL
VCC
0V
1.5
3.6 V
1.5
3.6 V
3
One input at VCC – 0.6 V, other input at VCC or GND
To show ICC is very low when OE is high and the inputs and outputs are disabled
Submit Documentation Feedback
µA
pF
pF
SN74AUP1G240
LOW-POWER SINGLE BUFFER/DRIVER
WITH 3-STATE OUTPUT
www.ti.com
SCES627A – MARCH 2005 – REVISED AUGUST 2006
Switching Characteristics
over recommended operating free-air temperature range, CL = 5 pF (unless otherwise noted) (see Figure 3 and Figure 4)
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
VCC
MIN
0.8 V
tpd
A
Y
OE
Y
OE
Y
UNIT
MAX
MIN
MAX
17.1
4.4
7.5
10.3
3.5
15.5
1.5 V ± 0.1 V
3.3
5.4
6.9
2.3
10.3
1.8 V ± 0.15 V
2.6
4.4
5.8
1.8
8.3
2.5 V ± 0.2 V
1.9
3.3
4.3
1.3
5.8
3.3 V ± 0.3 V
1.6
2.7
3.6
1
4.7
ns
16.5
1.2 V ± 0.1 V
4.5
8.1
13.4
3
18.6
1.5 V ± 0.1 V
3.8
5.7
8.4
2.8
12.2
1.8 V ± 0.15 V
3.1
4.5
6.3
2.3
9.7
2.5 V ± 0.2 V
2.4
3.2
4.1
1.8
6.6
3.3 V ± 0.3 V
2.1
2.7
3.3
1.5
5.6
0.8 V
tdis
TYP
1.2 V ± 0.1 V
0.8 V
ten
TA = –40°C
to 85°C
TA = 25°C
ns
9
1.2 V ± 0.1 V
2.6
2.6
4.7
2.2
8.4
1.5 V ± 0.1 V
2
2.8
3.2
1.7
5.9
1.8 V ± 0.15 V
1.8
2.5
3.1
1.6
5.5
2.5 V ± 0.2 V
1.3
1.9
2.1
1.1
4
3.3 V ± 0.3 V
1.6
2.4
2.9
1.4
4.1
ns
Switching Characteristics
over recommended operating free-air temperature range, CL = 10 pF (unless otherwise noted) (see Figure 3 and Figure 4)
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
VCC
MIN
0.8 V
1.2 V ± 0.1 V
tpd
A
Y
OE
Y
OE
Y
MAX
MIN
MAX
4.4
17.3
8.6
11.5
1.5 V ± 0.1 V
4
6.2
7.7
3
11.3
1.8 V ± 0.15 V
3.3
5.1
6.5
2.4
9.1
2.5 V ± 0.2 V
2.5
3.8
4.9
1.8
6.3
3.3 V ± 0.3 V
2
3.2
4.1
1.5
5.2
ns
18.7
1.2 V ± 0.1 V
5.1
8.9
14.4
3.7
20.9
1.5 V ± 0.1 V
4.3
6.3
9.1
3.3
13.7
1.8 V ± 0.15 V
3.6
5
6.8
2.8
10.9
2.5 V ± 0.2 V
2.8
3.7
4.6
2.2
7.7
3.3 V ± 0.3 V
2.5
3.1
3.7
1.9
6.3
ns
9.7
1.2 V ± 0.1 V
4.1
5.3
6.6
3.9
12.9
1.5 V ± 0.1 V
2.4
3.7
4.6
2.1
9.6
1.8 V ± 0.15 V
2.7
3.6
3.9
2.4
10.1
2.5 V ± 0.2 V
1.7
2.5
2.8
1.5
7.3
3.3 V ± 0.3 V
2.5
3.2
3.8
2.2
9.1
Submit Documentation Feedback
UNIT
19.5
0.8 V
tdis
TYP
5.4
0.8 V
ten
TA = –40°C
to 85°C
TA = 25°C
ns
5
SN74AUP1G240
LOW-POWER SINGLE BUFFER/DRIVER
WITH 3-STATE OUTPUT
www.ti.com
SCES627A – MARCH 2005 – REVISED AUGUST 2006
Switching Characteristics
over recommended operating free-air temperature range, CL = 15 pF (unless otherwise noted) (see Figure 3 and Figure 4)
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
VCC
MIN
0.8 V
tpd
A
Y
OE
Y
OE
Y
UNIT
MAX
MIN
MAX
22.4
6.4
9.7
12.9
5.4
19.8
1.5 V ± 0.1 V
4.8
7.1
8.7
3.8
13.3
1.8 V ± 0.15 V
3.9
5.8
7.2
3.1
10.8
2.5 V ± 0.2 V
2.9
4.4
5.4
2.3
7.6
3.3 V ± 0.3 V
2.4
3.6
4.5
1.9
6.1
22.9
ns
23.3
1.2 V ± 0.1 V
6
10.1
15.8
4.6
1.5 V ± 0.1 V
4.9
7
9.9
3.9
15
1.8 V ± 0.15 V
4
5.5
7.5
3.3
12.1
2.5 V ± 0.2 V
3.2
4
4.9
2.6
8.6
3.3 V ± 0.3 V
2.8
3.4
4
2.2
7
0.8 V
tdis
TYP
1.2 V ± 0.1 V
0.8 V
ten
TA = –40°C
to 85°C
TA = 25°C
ns
11.1
1.2 V ± 0.1 V
4.1
5.3
5.8
3
14
1.5 V ± 0.1 V
2.7
4
5.5
2.4
10.1
1.8 V ± 0.15 V
3.1
4.5
5.4
2.9
10.9
2.5 V ± 0.2 V
2.4
3
3.2
1.6
7.9
3.3 V ± 0.3 V
3.3
4.7
5.4
3
10
ns
Switching Characteristics
over recommended operating free-air temperature range, CL = 30 pF (unless otherwise noted) (see Figure 3 and Figure 4)
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
VCC
MIN
TYP
1.2 V ± 0.1 V
8.9
12.6
0.8 V
tpd
A
Y
OE
Y
6
OE
Y
MIN
MAX
16.1
7.3
25.7
1.5 V ± 0.1 V
6.8
9.2
11
5.5
17.1
1.8 V ± 0.15 V
5.5
7.6
9.2
4.5
13.8
2.5 V ± 0.2 V
4.2
5.7
6.8
3.5
9.7
3.3 V ± 0.3 V
3.5
4.7
5.7
2.3
7.8
1.2 V ± 0.1 V
8.2
12.6
18.5
6.8
27.4
1.5 V ± 0.1 V
6.6
8.8
11.8
5.6
18
1.8 V ± 0.15 V
5.5
7.1
9.1
4.7
14.2
2.5 V ± 0.2 V
4.4
5.3
6.2
3.8
10.2
3.3 V ± 0.3 V
3.9
4.5
5.1
3.1
8.2
1.2 V ± 0.1 V
5
6.2
7.4
4.8
14.8
1.5 V ± 0.1 V
4.2
5.7
7.7
3.9
10.8
1.8 V ± 0.15 V
5.1
7.2
9
4.9
11.7
2.5 V ± 0.2 V
4.3
5.3
5.9
4.1
9.1
3.3 V ± 0.3 V
7.4
8.3
9.4
4.3
11.6
Submit Documentation Feedback
UNIT
ns
30.9
0.8 V
tdis
MAX
29
0.8 V
ten
TA = –40°C
to 85°C
TA = 25°C
ns
14
ns
SN74AUP1G240
LOW-POWER SINGLE BUFFER/DRIVER
WITH 3-STATE OUTPUT
www.ti.com
SCES627A – MARCH 2005 – REVISED AUGUST 2006
Operating Characteristics
TA = 25°C
PARAMETER
TEST CONDITIONS
VCC
0.8 V
Outputs enabled
Cpd
Power dissipation capacitance
f = 10 MHz
Outputs disabled
Submit Documentation Feedback
TYP
UNIT
4
1.2 V ± 0.1 V
3.9
1.5 V ± 0.1 V
3.9
1.8 V ± 0.15 V
3.9
2.5 V ± 0.2 V
4
3.3 V ± 0.3 V
4.2
0.8 V
0
1.2 V ± 0.1 V
0
1.5 V ± 0.1 V
0
1.8 V ± 0.15 V
0
2.5 V ± 0.2 V
0
3.3 V ± 0.3 V
0
pF
7
SN74AUP1G240
LOW-POWER SINGLE BUFFER/DRIVER
WITH 3-STATE OUTPUT
www.ti.com
SCES627A – MARCH 2005 – REVISED AUGUST 2006
PARAMETER MEASUREMENT INFORMATION
(Propagation Delays, Setup and Hold Times, and Pulse Width)
From Output
Under Test
CL
(see Note A)
1 MW
LOAD CIRCUIT
CL
VM
VI
VCC = 0.8 V
VCC = 1.2 V
± 0.1 V
VCC = 1.5 V
± 0.1 V
VCC = 1.8 V
± 0.15 V
VCC = 2.5 V
± 0.2 V
VCC = 3.3 V
± 0.3 V
5, 10, 15, 30 pF
VCC/2
VCC
5, 10, 15, 30 pF
VCC/2
VCC
5, 10, 15, 30 pF
VCC/2
VCC
5, 10, 15, 30 pF
VCC/2
VCC
5, 10, 15, 30 pF
VCC/2
VCC
5, 10, 15, 30 pF
VCC/2
VCC
tw
VCC
Input
VCC/2
VCC/2
VI
VM
Input
0V
VM
VOLTAGE WAVEFORMS
PULSE DURATION
0V
tPHL
tPLH
VOH
VM
Output
VM
VOL
tPHL
VCC
Timing Input
0V
tPLH
tsu
VOH
VM
Output
VCC
Data Input
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
INVERTING AND NONINVERTING OUTPUTS
VCC/2
VCC/2
0V
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
CL includes probe and jig capacitance.
All input pulses are supplied by generators having the following characteristics: PRR £ 10 MHz, ZO = 50 W, tr/tf = 3 ns.
The outputs are measured one at a time, with one transition per measurement.
tPLH and tPHL are the same as tpd.
All parameters and waveforms are not applicable to all devices.
Figure 3. Load Circuit and Voltage Waveforms
8
th
VM
VOL
NOTES: A.
B.
C.
D.
E.
VCC/2
Submit Documentation Feedback
SN74AUP1G240
LOW-POWER SINGLE BUFFER/DRIVER
WITH 3-STATE OUTPUT
www.ti.com
SCES627A – MARCH 2005 – REVISED AUGUST 2006
PARAMETER MEASUREMENT INFORMATION
(Enable and Disable Times)
2 ´ VCC
5 kW
From Output
Under Test
S1
GND
CL
(see Note A)
5 kW
TEST
S1
tPLZ/tPZL
tPHZ/tPZH
2 ´ VCC
GND
LOAD CIRCUIT
CL
VM
VI
VD
VCC = 0.8 V
VCC = 1.2 V
± 0.1 V
VCC = 1.5 V
± 0.1 V
VCC = 1.8 V
± 0.15 V
VCC = 2.5 V
± 0.2 V
VCC = 3.3 V
± 0.3 V
5, 10, 15, 30 pF
VCC/2
VCC
0.1 V
5, 10, 15, 30 pF
VCC/2
VCC
0.1 V
5, 10, 15, 30 pF
VCC/2
VCC
0.1 V
5, 10, 15, 30 pF
VCC/2
VCC
0.15 V
5, 10, 15, 30 pF
VCC/2
VCC
0.15 V
5, 10, 15, 30 pF
VCC/2
VCC
0.3 V
VCC
Output
Control
Output
Waveform 1
S1 at 2 ´ VCC
(see Note B)
VCC/2
0V
tPZL
tPLZ
VCC
VCC/2
tPZH
Output
Waveform 2
S1 at GND
(see Note B)
VCC/2
VOL + VD
VOL
tPHZ
VCC/2
VOH - VD
VOH
»0 V
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
LOW- AND HIGH-LEVEL ENABLING
NOTES: A. CL includes probe and jig capacitance.
B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR £ 10 MHz, ZO = 50 W, tr/tf = 3 ns.
D. The outputs are measured one at a time, with one transition per measurement.
E. tPLZ and tPHZ are the same as tdis.
F. tPZL and tPZH are the same as ten.
G. All parameters and waveforms are not applicable to all devices.
Figure 4. Load Circuit and Voltage Waveforms
Submit Documentation Feedback
9
PACKAGE OPTION ADDENDUM
www.ti.com
29-May-2007
PACKAGING INFORMATION
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
74AUP1G240DBVRE4
ACTIVE
SOT-23
DBV
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
74AUP1G240DBVRG4
ACTIVE
SOT-23
DBV
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
74AUP1G240DBVTE4
ACTIVE
SOT-23
DBV
5
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
74AUP1G240DBVTG4
ACTIVE
SOT-23
DBV
5
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
74AUP1G240DCKRE4
ACTIVE
SC70
DCK
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
74AUP1G240DCKRG4
ACTIVE
SC70
DCK
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
74AUP1G240DCKTE4
ACTIVE
SC70
DCK
5
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
74AUP1G240DCKTG4
ACTIVE
SC70
DCK
5
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN74AUP1G240DBVR
ACTIVE
SOT-23
DBV
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN74AUP1G240DBVT
ACTIVE
SOT-23
DBV
5
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN74AUP1G240DCKR
ACTIVE
SC70
DCK
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
SN74AUP1G240DCKT
ACTIVE
SC70
DCK
5
250
CU NIPDAU
Level-1-260C-UNLIM
SN74AUP1G240YZPR
ACTIVE
WCSP
YZP
5
3000 Green (RoHS &
no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
Green (RoHS &
no Sb/Br)
Lead/Ball Finish
MSL Peak Temp (3)
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
29-May-2007
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
4-Oct-2007
TAPE AND REEL BOX INFORMATION
Device
Package Pins
Site
Reel
Diameter
(mm)
Reel
Width
(mm)
A0 (mm)
B0 (mm)
K0 (mm)
P1
(mm)
W
Pin1
(mm) Quadrant
SN74AUP1G240DBVR
DBV
5
SITE 35
180
9
3.23
3.17
1.37
4
8
Q3
SN74AUP1G240DBVT
DBV
5
SITE 35
180
9
3.23
3.17
1.37
4
8
Q3
SN74AUP1G240DCKR
DCK
5
SITE 35
180
9
2.24
2.34
1.22
4
8
Q3
SN74AUP1G240DCKT
DCK
5
SITE 35
180
9
2.24
2.34
1.22
4
8
Q3
SN74AUP1G240YZPR
YZP
5
SITE 12
180
8
1.02
1.52
0.66
4
8
Q1
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
4-Oct-2007
Device
Package
Pins
Site
Length (mm)
Width (mm)
Height (mm)
SN74AUP1G240DBVR
DBV
5
SITE 35
202.0
201.0
28.0
SN74AUP1G240DBVT
DBV
5
SITE 35
202.0
201.0
28.0
SN74AUP1G240DCKR
DCK
5
SITE 35
202.0
201.0
28.0
SN74AUP1G240DCKT
DCK
5
SITE 35
202.0
201.0
28.0
SN74AUP1G240YZPR
YZP
5
SITE 12
220.0
220.0
0.0
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements,
improvements, and other changes to its products and services at any time and to discontinue any product or service without notice.
Customers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s
standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this
warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily
performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should
provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask
work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services
are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such
products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under
the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is
accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an
unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties
may be subject to additional restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service
voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business
practice. TI is not responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would
reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement
specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications
of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related
requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any
applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its
representatives against any damages arising out of the use of TI products in such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is
solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in
connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products
are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any
non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Applications
Amplifiers
amplifier.ti.com
Audio
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DSP
dsp.ti.com
Broadband
www.ti.com/broadband
Interface
interface.ti.com
Digital Control
www.ti.com/digitalcontrol
Logic
logic.ti.com
Military
www.ti.com/military
Power Mgmt
power.ti.com
Optical Networking
www.ti.com/opticalnetwork
Microcontrollers
microcontroller.ti.com
Security
www.ti.com/security
RFID
www.ti-rfid.com
Telephony
www.ti.com/telephony
Low Power
Wireless
www.ti.com/lpw
Video & Imaging
www.ti.com/video
Wireless
www.ti.com/wireless
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2007, Texas Instruments Incorporated