TI TL092CPSR

SLOS372 − JUNE 2001
D Wide Range of Supply Voltages; Single
D
D
D
D
D
D
D
PS PACKAGE
(TOP VIEW)
Supply . . . 3 V to 36 V, or Dual Supplies
Class AB Output Stage
High-Impedance N-Channel-JFET Input
Stage . . . 1012 Ω Typ
Internal Frequency Compensation
Short-Circuit Protection
Input Common Mode Includes VCC−
Low Input Offset Current . . . 50 pA
Low Input Bias Current . . . 200 pA Typ
1OUT
1IN −
1IN +
VCC −
1
8
2
7
3
6
4
5
VCC +
2OUT
2IN −
2IN +
description
The TL092 JFET-input operational amplifier is similar in performance to the MC3403 family, but with much
higher input impedance derived from a FET input stage. The N-channel-JFET input stage allows a
common-mode input voltage range that includes the negative supply voltage and offers a typical input
impedance of 1012 Ω a typical input offset current of 50 pA, and a typical input bias current of 200 pA. This device
is designed to operate from a single supply over a range of 3 V to 36 V. Operation from split supplies also is
possible, provided the difference between the two supplies is 3 V to 36 V. Output voltage range is from VCC−
to VCC+ − 1.3 V, with a load resistor to VCC−.
The TL092 is characterized for operation from 0°C to 70°C.
AVAILABLE OPTIONS
PACKAGED DEVICE
PLASTIC
SMALL OUTLINE
(PS)
TA
0°C to 70°C
TL092CPSR
The PS package is only available taped and
reeled. Add the suffix R to device type for
ordering (e.g., TL092CPSR).
symbol
IN +
+
IN −
−
OUT
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright  2001, Texas Instruments Incorporated
!"# $%
$ ! ! & ' $$ ()% $ !* $ #) #$
* ## !%
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
SLOS372 − JUNE 2001
schematic
VCC+
IN+
IN−
OUT
VCC−
2
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
SLOS372 − JUNE 2001
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage: VCC+ (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 V
VCC− (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −18 V
VCC+ with respect to VCC− . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 V
Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±36 V
Input voltage, VI (see Notes 1 and 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±18 V
Package thermal impedance, θJA (see Notes 4 and 5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95°C/W
Lead temperature 1.6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between VCC+ and VCC−.
2. Differential voltages are at the noninverting input with respect to the inverting input.
3. Neither input must ever be more positive than VCC+ or more negative than VCC− − 0.3 V.
4. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable
ambient temperature is PD = (TJ(max) − TA)/θJA. Operating at the absolute maximum TJ of 150°C can impact reliability.
5. The package thermal impedance is calculated in accordance with JESD 51-7.
recommended operating conditions
VCC±
TA
MIN
MAX
Supply voltage
3
36
V
Operating free-air temperature range
0
70
°C
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
UNIT
3
SLOS372 − JUNE 2001
electrical characteristics at specified free-air temperature, VCC± = ±15 V
(all characteristics are specified under open-loop conditions, unless otherwise noted)
PARAMETER
VIO
Input offset voltage
αVIO
Temperature coefficient
of input offset voltage
IIO‡
Input offset current
TEST CONDITIONS
RS = 50 Ω
MIN
TA
25°C
Input bias current
VICR
Common-mode input
voltage range
VO(PP)
Peak output voltage swing
MAX
5
15
Full range
20
UNIT
mV
µV/°C
25°C
10
25°C
50
200
pA
5
nA
200
400
pA
10
nA
Full range
25°C
IIB‡
TYP†
Full range
25°C
VCC−
to 12
VCC−
to 13
RL = 2 kΩ
25°C
±10
±13
RL = 10 kΩ
25°C
±12
±13.5
RL = 2 kΩ
Full range
±10
25°C
20
Full range
15
V
V
200
AVD
Large-signal differential
voltage amplification
RL = 2 kΩ,
VO = ±10 V
BOM
Maximum output swing
bandwidth
RL = 2 kΩ,
AVD = 1,
VO(PP) = 20 V,
THD < 5%
B1
φm
Unity gain bandwidth
RL = 10 kΩ,
Phase margin
RL = 2 kΩ,
VO = 50 mV
CL = 200 pF
ri
Input resistance
f = 20 Hz
ro
Output resistance
f = 20 Hz
75
Ω
CMRR
Common-mode rejection ratio
RS = 50 Ω,
VIC = VICR
25°C
70
90
dB
kSVR
Supply-voltage rejection ratio
(∆VCC/∆VIO)
RS = 50 Ω,
VCC± = ±3 V to ±15 V
25°C
75
90
dB
VO = 0,
No load
IOS
ICC
9
kHz
25°C
1
MHz
25°C
60°
1012
25°C
25°C
Short-circuit output current
Supply current (per amplifier)
25°C
V/mV
25°C
40
25°C
1.5
Ω
mA
2.5
mA
† All typical values are at TA = 25°C.
‡ Input bias currents of a FET-input operational amplifier are normal junction reverse currents, which are temperature sensitive. Pulse techniques
that maintain the junction temperature as close to the ambient temperature as possible must be used.
electrical characteristics at specified free-air temperature, VCC+ = 5 V, VCC− = 0 V, TA = 25°C
(unless otherwise noted)
PARAMETER
TEST CONDITIONS
VIO
IIO
Input offset voltage
RS = 50 Ω,
Input offset current
IIB
Input bias current
VO = 2.5 V
VO = 2.5 V
VO(PP)
Peak output voltage swing
AVD
kSVR
ICC
VO1/VO2
VO = 2.5 V
RL = 10 kΩ
3.3
RL = 10 kΩ,
VCC+ = 5 V to 30 V
Large-signal differential
voltage amplification
RL = 2 kΩ,
∆VO =1.6 V
20
Supply-voltage rejection ratio
(∆VCC/∆VIO)
RS = 50 Ω,
VCC± = ±3 V to ±15 V
75
Supply current (per amplifier)
VO = 2.5 V,
No load
f = 1 kHz to 20 kHz
Channel separation
† All typical values are at TA = 25°C.
4
MIN
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TYP†
MAX
UNIT
5
15
mV
50
200
pA
200
400
pA
3.5
V
VCC+−1.7
V
200
V/mV
dB
1.5
120
2.5
mA
dB
SLOS372 − JUNE 2001
operating characteristics, VCC± = ±15 V, TA = 25°C
PARAMETER
MIN
TYP
MAX
UNIT
VI = ±10 V (see Figure 1),
∆VO = 50 mV (see Figure 1),
CL = 100 pF,
RL = 2 kΩ
0.6
V/µs
CL = 100 pF,
RL = 2 kΩ
0.2
µs
CL = 100 pF,
RL = 2 kΩ
0.2
µs
Overshoot factor
∆VO = 50 mV (see Figure 1),
∆VO = 50 mV (see Figure 1),
CL = 100 pF,
RL = 2 kΩ
20%
Crossover distortion
VIPP = 30 mV, VO(PP) = 2 V,
f = 10 kHz
1%
Equivalent input
noise voltage
RS = 100 Ω,
f = 1 kHz
34
Rise time
Fall time
nV/√Hz
PARAMETER MEASUREMENT INFORMATION
OUT
VI
+
Slew rate at unity gain
tr
tf
−
SR
Vn
TEST CONDITIONS
CL = 100 pF
RL = 2 kΩ
Figure 1. Unity-Gain Amplifier
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5
PACKAGE OPTION ADDENDUM
www.ti.com
27-Feb-2006
PACKAGING INFORMATION
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
TL092CPSR
ACTIVE
SO
PS
8
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL092CPSRE4
ACTIVE
SO
PS
8
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
Lead/Ball Finish
MSL Peak Temp (3)
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 1
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products
Applications
Amplifiers
amplifier.ti.com
Audio
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DSP
dsp.ti.com
Broadband
www.ti.com/broadband
Interface
interface.ti.com
Digital Control
www.ti.com/digitalcontrol
Logic
logic.ti.com
Military
www.ti.com/military
Power Mgmt
power.ti.com
Optical Networking
www.ti.com/opticalnetwork
Microcontrollers
microcontroller.ti.com
Security
www.ti.com/security
Mailing Address:
Telephony
www.ti.com/telephony
Video & Imaging
www.ti.com/video
Wireless
www.ti.com/wireless
Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright  2006, Texas Instruments Incorporated