TI TLE2082ID

TLE2082, TLE2082A, TLE2082Y
EXCALIBUR HIGH-SPEED
JFET-INPUT DUAL OPERATIONAL AMPLIFIERS
SLOS105A – AUGUST 1991 – REVISED AUGUST 1994
•
•
•
•
•
40 -V/µs Slew Rate Typ
High-Gain Bandwidth Product . . . 10 MHz
± 30 -mA Minimum Short-Circuit Output
Current
Wide Supply Range . . . ± ± •
•
Fast Settling Time Using 10-V Step
400 ns to 10 mV Typ
1.5 µs to 1 mV Typ
Input Range Includes the Positive Supply
Macromodel Included
OUTPUT VOLTAGE
vs
SETTLING TIME
12.5
1
VCC ± = ± 15 V
VO(PP) = 20 V
TA = 25°C
10
10 mV
7.5
VO
VO – Output Voltage – V
THD + N – Total Harmonic Distortion + Noise – %
TOTAL HARMONIC DISTORTION PLUS NOISE
vs
FREQUENCY
AV = 100, RL = 600 Ω
0.1
AV = 100, RL = 2 kΩ
AV = 10, RL = 600 Ω
AV = 10, RL = 2 kΩ
0.01
1 mV
5
2.5
VCC ± = ± 15 V
RL = 1 kΩ
CL = 100 pF
AV = – 1
TA = 25°C
Rising
0
Falling
– 2.5
–5
– 7.5
10 mV
1 mV
– 10
Filter: 10-Hz to 500-kHz Band Pass
0.001
10
– 12.5
100
1k
10 k
100 k
0
0.5
1
1.5
2
ts – Settling Time – µs
f – Frequency – Hz
description
The TLE2082 and TLE2082A are high-performance, high-speed, internally compensated JFET-input dual
operational amplifiers built using Texas Instruments complementary bipolar Excalibur process. The TLE2082A
has a lower input offset voltage than the TLE2082. Both are pin-compatible upgrades to standard industry
products.
AVAILABLE OPTIONS
PACKAGED DEVICES
TA
VIOmax
AT 25°C
SMALL
OUTLINE
(D)
CHIP
CARRIER
(FK)
CERAMIC
DIP
(JG)
PLASTIC
DIP
(P)
CHIP FORM
(Y)
0°C to 70°C
4 mV
7 mV
TLE2082ACD
TLE2082CD
—
—
TLE2082ACP
TLE2082CP
—
– 40°C to 85°C
4 mV
7 mV
TLE2082AID
TLE2082ID
—
—
TLE2082AIP
TLE2082IP
TLE2082Y
– 55°C to 125°C
4 mV
7 mV
TLE2082AMD
TLE2082MD
TLE2082AMFK
TLE2082MFK
TLE2082AMJG
TLE2082MJG
TLE2082AMP
TLE2082MP
—
The D packages are available taped and reeled. Add R suffix to device type (e.g., TLE2082ACDR). Chip-form versions are
tested at TA = 25°C. For chip-form orders, contact your local TI sales office.
Copyright  1994, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
On products compliant to MIL-STD-883, Class B, all parameters are
tested unless otherwise noted. On all other products, production
processing does not necessarily include testing of all parameters.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–1
TLE2082, TLE2082A, TLE2082Y
EXCALIBUR HIGH-SPEED
JFET-INPUT DUAL OPERATIONAL AMPLIFIERS
SLOS105A – AUGUST 1991 – REVISED AUGUST 1994
description (continued)
The design features a 28-V/µs minimum slew rate, which results in a high-power bandwidth. Settling time to
0.1% of a 10-V step (1 kΩ/100-pF load) is approximately 400 ns. Gain-bandwidth product is typically 10 MHz
with an 8-MHz minimum. As such, the TLE2082 and TLE2082A offer significant speed and noise advantages
at a low 1.5-mA typical supply current per channel.
The input current characteristics traditionally associated with JFET-input amplifiers have been maintained. The
input offset voltage is graded to a 7-mV and a 4-mV maximum for the TLE2082 and the TLE2082A, respectively.
Typically, temperature coefficient of input offset voltage is 2.4 µV/°C and typical CMRR and kSVR are 98 dB and
99 dB, respectively. Device performance is relatively independent of supply voltage over the wide ± 2.25-V to
± 19-V range. The input common-mode voltage range extends from the positive supply down to VCC – + 4 V
without significant degradation to dynamic performance. Maximum peak output voltage swing is from
VCC + – 1 V to VCC – + 1 V under light loading conditions. The output is capable of sourcing and sinking currents
to at least 30 mA and can sustain shorts to either supply. Care must be taken to ensure that maximum power
dissipation is not exceeded.
Both the TLE2082 and TLE2082A are available in a wide variety of packages, including both the
industry-standard 8-pin small-outline version and chip form for high-density system applications. The C-suffix
devices are characterized for operation from 0°C to 70°C, the I-suffix devices over the – 40°C to 85°C range,
and the M-suffix devices over the full military temperature range of – 55°C to 125°C.
1
8
2
7
3
6
4
5
VCC+
2OUT
2IN –
2IN+
NC
1IN –
NC
1IN+
NC
4
3 2 1 20 19
18
5
17
6
16
7
15
8
14
9 10 11 12 13
NC
VCC –
NC
2IN +
NC
1OUT
1IN –
1IN +
VCC –
FK PACKAGE
(TOP VIEW)
NC
1OUT
NC
V CC +
NC
D, JG, OR P PACKAGE
(TOP VIEW)
NC – No internal connection
symbol
IN +
+
IN –
–
OUT
5–2
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
NC
2OUT
NC
2IN –
NC
TLE2082, TLE2082A, TLE2082Y
EXCALIBUR HIGH-SPEED
JFET-INPUT DUAL OPERATIONAL AMPLIFIERS
SLOS105A – AUGUST 1991 – REVISED AUGUST 1994
TLE2082Y chip information
This chip, when properly assembled, displays characteristics similar to the TLE2082. Thermal compression or
ultrasonic bonding may be used on the doped-aluminum bonding pads. Chips may be mounted with conductive
epoxy or a gold-silicon preform.
VCC+
(8)
BONDING PAD ASSIGNMENTS
(8)
(1)
(7)
1IN +
(3)
(2)
1IN –
2OUT
(7)
+
(1)
1OUT
–
+
–
(5)
2IN +
(6)
2IN –
(4)
VCC–
90
(2)
(6)
CHIP THICKNESS: 15 TYPICAL
BONDING PADS: 4 × 4 MINIMUM
TJmax = 150°C
TOLERANCES ARE ± 10%.
ALL DIMENSIONS ARE IN MILS.
(3)
(5)
(4)
PIN (4) IS INTERNALLY CONNECTED
TO BACKSIDE OF THE CHIP.
80
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–3
5–4
IN +
IN –
Q2
Q1
D1
Q5
Q7
Q6
Q4
Q3
Q8
Q10
Q9
R1
equivalent schematic (each channel)
C1
R3
Q11
Q12
R2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
C2
R4
D2
VCC –
R7
C3
Q16
Q15
R5
Q14
Q13
C4
Q18
Q17
R6
VCC +
R9
C5
Q21
R8
Q19
Q20
R10
Q22
C6
D3
Q26 Q27
Q25
Q24
Q23
R11
Q29
Q28
R12
Q31
Q30
R13
R14
OUT
ACTUAL DEVICE
COMPONENT COUNT
57
Transistors
37
Resistors
5
Diodes
11
Capacitors
TLE2082, TLE2082A, TLE2082Y
EXCALIBUR HIGH-SPEED
JFET-INPUT
DUAL OPERATIONAL AMPLIFIERS
SLOS105A – AUGUST 1991 – REVISED AUGUST 1994
TLE2082, TLE2082A, TLE2082Y
EXCALIBUR HIGH-SPEED
JFET-INPUT DUAL OPERATIONAL AMPLIFIERS
SLOS105A – AUGUST 1991 – REVISED AUGUST 1994
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage, VCC + (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 V
Supply voltage, VCC – (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 19 V
Differential input voltage range, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC + to VCC –
Input voltage range, VI (any input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC + to VCC –
Input current, II (each input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 1 mA
Output current, IO (each output) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 80 mA
Total current into VCC + . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 mA
Total current out of VCC – . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 mA
Duration of short-circuit current at (or below) 25°C (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . unlimited
Continuous total dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table
Operating free-air temperature range, TA: C suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
I suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 40°C to 85°C
M suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 55°C to 125°C
Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C
Case temperature for 60 seconds: FK package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D or P package . . . . . . . . . . . . . . . . . 260°C
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: JG package . . . . . . . . . . . . . . . . . . . . 300°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values except differential voltages are with respect to the midpoint between VCC + and VCC – .
2. Differential voltages are at IN+ with respect to IN –.
3. The output may be shorted to either supply. Temperatures and/or supply voltages must be limited to ensure that the maximum
dissipation rate is not exceeded.
DISSIPATION RATING TABLE
PACKAGE
TA ≤ 25°C
POWER RATING
DERATING FACTOR
ABOVE TA = 25°C
TA = 70°C
POWER RATING
TA = 85°C
POWER RATING
TA = 125°C
POWER RATING
D
725 mW
5.8 mW/°C
464 mW
377 mW
145 mW
FK
1375 mW
11.0 mW/°C
880 mW
715 mW
275 mW
JG
1050 mW
8.4 mW/°C
672 mW
546 mW
210 mW
P
1000 mW
8.0 mW/°C
640 mW
344 mW
200 mW
recommended operating conditions
Supply voltage, VCC±
Common-mode input voltage
voltage, VIC
VCC ± = ± 5 V
VCC ± = ±15 V
Operating free-air temperature, TA
POST OFFICE BOX 655303
C SUFFIX
I SUFFIX
M SUFFIX
MIN
MAX
MIN
MAX
MIN
MAX
± 2.25
± 19
± 2.25
± 19
± 2.25
± 19
– 0.9
5
– 0.8
5
– 0.8
5
– 10.9
15
– 10.8
15
– 10.8
15
0
70
– 40
85
– 55
125
• DALLAS, TEXAS 75265
UNIT
V
V
°C
5–5
TLE2082, TLE2082A, TLE2082Y
EXCALIBUR HIGH-SPEED
JFET-INPUT DUAL OPERATIONAL AMPLIFIERS
SLOS105A – AUGUST 1991 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±5 V (unless otherwise noted)
PARAMETER
VIO
Input offset voltage
αVIO
Temperature coefficient
of input offset voltage
IIO
Input offset current
IIB
TEST CONDITIONS
TA†
25°C
VIC = 0,
0
RS = 50 Ω
VO = 0,
0
F ll range
Full
g
IO = – 200 µA
VOM +
Maximum positive peak
output voltage swing
IO = – 2 mA
IO = – 20 mA
IO = 200 µA
VOM –
Maximum negative peak
output voltage swing
IO = 2 mA
IO = 20 mA
RL = 600 Ω
AVD
Large signal differential
Large-signal
voltage amplification
VO = ± 2
2.3
3 V RL = 2 kΩ
RL = 10 kΩ
ri
Input resistance
Common mode
ci
Input
capacitance
zo
Open-loop output impedance
Differential
VIC = 0
VIC = 0
0,
See Figure 5
25°C
3.8
Full range
3.7
25°C
3.5
Full range
3.4
25°C
1.5
Full range
1.5
25°C
– 3.8
Full range
– 3.7
25°C
– 3.5
Full range
– 3.4
25°C
– 1.5
Full range
– 1.5
25°C
80
Full range
79
25°C
90
Full range
89
25°C
95
Full range
94
5
100
5
100
pA
1.4
nA
15
175
15
175
pA
5
nA
2.7
VO = 0
0,
No load
3.8
4.1
3.7
3.9
3.5
3.9
Full range
• DALLAS, TEXAS 75265
V
3.4
2.3
1.5
2.3
1.5
– 4.2
– 3.8
– 4.2
– 3.7
– 4.1
– 3.5
– 4.1
V
– 3.4
– 2.4
– 1.5
– 2.4
– 1.5
91
80
91
79
100
90
100
dB
89
106
95
106
94
80
† Full range is 0°C to 70°C.
POST OFFICE BOX 655303
4.1
2.5
25°C
Supply
pp y current
(both channels)
V
5
to
– 0.9
2.5
80
ICC
5
to
– 1.9
25°C
Full range
VCC ± = ± 5 V to ± 15 V,
VO = 0,
RS = 50 Ω
5
to
–1
11
82
Supply voltage rejection
Supply-voltage
ratio(∆VCC± /∆VIO)
5
to
– 1.9
11
25°C
kSVR
5–6
µV/°C
25°C
68
mV
25
1012
Full range
VIC = VICRmin,
VO = 0,
RS = 50 Ω
UNIT
2.3
1012
70
4
5.1
25°C
25°C
MAX
25
5
to
– 0.9
25°C
Common-mode rejection ratio
0.65
5
5
to
–1
f = 1 MHz
CMRR
6
TYP
2.3
Full range
RS = 50 Ω
MIN
1.4
25°C
Input bias current
TLE2082AC
MAX
8.1
Full range
25°C
VICR
0.9
Full range
VO = 0,
0
TYP
Full range
25°C
VIC = 0,
0
See Figure 4
Common mode
C
Common-mode
d input
i
voltage
g range
g
TLE2082C
MIN
Ω
pF
Ω
80
89
70
89
dB
68
99
82
99
dB
80
2.9
3.6
3.6
2.7
2.9
3.6
3.6
mA
TLE2082, TLE2082A, TLE2082Y
EXCALIBUR HIGH-SPEED
JFET-INPUT DUAL OPERATIONAL AMPLIFIERS
SLOS105A – AUGUST 1991 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±5 V (unless otherwise noted)
(continued)
PARAMETER
Crosstalk attenuation
IOS
Short-circuit output current
TEST CONDITIONS
VIC = 0,
RL = 2 kΩ
VO = 0
VID = 1 V
VID = – 1 V
TLE2082C
TA
MIN
25°C
25°C
TYP
TLE2082AC
MAX
MIN
TYP
120
120
– 35
– 35
45
45
MAX
UNIT
dB
mA
operating characteristics at specified free-air temperature, VCC± = ±5 V
PARAMETER
TEST CONDITIONS
TA†
TLE2082C
MIN
TYP
25°C
SR +
Positive
rate
P i i slew
l
SR –
Negative
rate
N
i slew
l
ts
Settling time
Vn
Equivalent input noise
voltage
VN(PP)
Peak-to-peak
P
k
p k equivalent
q i l
input noise voltage
VO(PP) = ± 2.3
2 3 V,
V
AVD = – 1,
1
RL = 2 kΩ
kΩ,
See Figure 1
CL = 100 pF,
Full
range
AVD = – 1,
2
V step,
2-V
RL = 1 kΩ,
CL = 100 pF
22
TYP
38
22
38
V/µs
V/
22
0.25
0.25
0.4
0.4
µs
To 1 mV
f = 10 Hz to
10 kHz
f = 0.1Hz to
10 Hz
UNIT
V/µs
V/
25°C
f = 10 kHz
MAX
35
22
To 10 mV
f = 10 Hz
RS = 20 Ω,
Ω
S Fi
See
Figure 3
MIN
35
25°C
Full
range
TLE2082AC
MAX
25°C
28
28
11.6
11.6
6
6
0.6
0.6
nV/√Hz
V
µV
25°C
In
Equivalent input noise
current
VIC = 0,
f = 10 kHz
25°C
2.8
2.8
THD + N
Total harmonic distortion
plus noise
VO(PP) = 5 V,
f = 1 kHz,
kHz
RS = 25 Ω
AVD = 10,
RL = 2 kΩ
kΩ,
25°C
0 013%
0.013%
0 013%
0.013%
B1
Unity-gain bandwidth
VI = 10 mV,
CL = 25 pF,
RL = 2 kΩ,
See Figure 2
25°C
94
9.4
94
9.4
MHz
BOM
Maximum output
output-swing
swing
bandwidth
VO(PP) = 4 V,,
RL = 2 kΩ ,
AVD = – 1,,
CL = 25 pF
25°C
28
2.8
28
2.8
MHz
φm
Phase margin
g at unity
y
gain
VI = 10 mV,,
CL = 25 pF,
RL = 2 kΩ,,
See Figure 2
25°C
56°
56°
fA/√Hz
† Full range is 0°C to 70°C.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–7
TLE2082, TLE2082A, TLE2082Y
EXCALIBUR HIGH-SPEED
JFET-INPUT DUAL OPERATIONAL AMPLIFIERS
SLOS105A – AUGUST 1991 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±15 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
VIO
Input offset voltage
αVIO
Temperature coefficient
of input offset voltage
IIO
Input offset current
IIB
TA†
25°C
VIC = 0,
0
RS = 50 Ω
VO = 0,
0
VO = 0,
0
RS = 50 Ω
IO = – 200 µA
Maximum positive peak
output voltage swing
IO = – 2 mA
IO = – 20 mA
IO = 200 µA
VOM –
M i
Maximum
negative
i peak
k
output voltage swing
IO = 2 mA
IO = 20 mA
RL = 600 Ω
AVD
Large signal differential
Large-signal
voltage amplification
VO = ± 10 V
RL = 2 kΩ
RL = 10 kΩ
ri
ci
Input resistance
Input
capacitance
VIC = 0
Common
mode
VIC = 0,
See Figure 5
Differential
zo
Open-loop output impedance
13.8
Full range
13.6
25°C
13.5
Full range
13.4
25°C
11.5
Full range
11.5
25°C
– 13.8
Full range
– 13.7
25°C
– 13.5
Full range
– 13.4
25°C
– 11.5
Full range
– 11.5
25°C
80
Full range
79
25°C
90
Full range
89
25°C
95
Full range
94
µV/°C
6
100
6
100
pA
1.4
nA
20
175
20
175
pA
5
nA
15
to
– 11
15
to
– 11.9
14.1
13.8
14.1
13.6
13.9
13.5
13.9
12.3
11.5
12.3
11.5
– 14.2
– 13.8
– 14.2
– 13.7
– 14
–13.5
– 14
– 12.4
– 11.5
– 12.4
– 11.5
96
80
96
79
109
90
109
118
95
118
94
25°C
2.5
2.5
80
79
kSVR
Supply-voltage
Supply
voltage rejection
ratio (∆VCC± /∆VIO)
VCC ± = ± 5 V to ± 15 V,
VO = 0,
RS = 50 Ω
25°C
82
Full range
81
ICC
Supply
pp y current
(both channels)
VO = 0
0,
25°C
2.7
Full range
† Full range is 0°C to 70°C.
• DALLAS, TEXAS 75265
dB
89
7.5
Full range
V
– 13.4
7.5
VIC = VICRmin,
VO = 0,
RS = 50 Ω
V
13.4
25°C
Common mode
Common-mode
rejection ratio
V
15
to
– 10.9
1012
80
POST OFFICE BOX 655303
15
to
– 11.9
1012
25°C
mV
25
25°C
25°C
4
UNIT
2.4
15
to
– 10.9
25°C
MAX
5.1
5
15
to
– 11
CMRR
5–8
0.7
1.4
f = 1 MHz
No load
7
TYP
25
Full range
Common mode
C
Common-mode
d input
i
voltage
g range
g
MIN
2.4
Full range
25°C
Input bias current
TLE2082AC
MAX
8.1
Full range
F ll range
Full
g
VOM +
1.1
25°C
VIC = 0,
0
See Figure 4
TYP
Full range
25°C
VICR
TLE2082C
MIN
Ω
pF
Ω
80
98
80
98
dB
79
99
82
99
dB
81
3.1
3.6
3.6
2.7
3.1
3.6
3.6
mA
TLE2082, TLE2082A, TLE2082Y
EXCALIBUR HIGH-SPEED
JFET-INPUT DUAL OPERATIONAL AMPLIFIERS
SLOS105A – AUGUST 1991 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±15 V (unless otherwise noted)
(continued)
PARAMETER
Crosstalk attenuation
IOS
Short-circuit output current
TEST CONDITIONS
VIC = 0,
RL = 2 kΩ
VO = 0
VID = 1 V
VID = – 1 V
TLE2082C
TA
MIN
TYP
– 30
30
25°C
25°C
TLE2082AC
MAX
MIN
TYP
– 45
– 30
– 45
48
30
48
120
MAX
120
UNIT
dB
mA
operating characteristics at specified free-air temperature, VCC± = ±15 V
PARAMETER
SR +
Positive
rate
P i i slew
l
SR –
Negative
rate
N
i slew
l
ts
Vn
VN(PP)
Settling time
TEST CONDITIONS
VO(PP) = 10 V,
V AVD = – 1,
1
RL = 2 kΩ
kΩ,
CL = 100 pF,
pF
See Figure 1
AVD = – 1,
10
V step,
10-V
RL = 1 kΩ,
CL = 100 pF
P k to peakk equivalent
i l
Peak
Peak-to-peak
input noise voltage
TYP
25°C
28
40
Full
range
25
25°C
30
Full
range
25
TLE2082AC
MAX
MIN
TYP
28
40
45
30
UNIT
45
V/µs
V/
25
0.4
0.4
1.5
1.5
µs
To 1 mV
25°C
f = 10 Hz to
10 kHz
f = 0.1 Hz to
MAX
V/µs
V/
25
25°C
f = 10 kHz
RS = 20 Ω,
Ω
See Figure 3
TLE2082C
MIN
To 10 mV
f = 10 Hz
Equivalent input noise
voltage
TA†
28
28
11.6
11.6
6
6
06
0.6
06
0.6
nV/√Hz
V
µV
25°C
10 Hz
In
Equivalent input noise
current
VIC = 0,
f = 10 kHz
25°C
2.8
2.8
THD + N
Total harmonic distortion
plus noise
VO(PP) = 20 V, AVD = 10,
f = 1 kHz,
kHz
RL = 2 kΩ
kΩ,
RS = 25 Ω
25°C
0 008%
0.008%
0 008%
0.008%
B1
Unity-gain bandwidth
VI = 10 mV,
CL = 25 pF,
25°C
8
10
8
10
MHz
BOM
Maximum output
output-swing
swing
bandwidth
VO(PP) = 20 V,, AVD = – 1,,
RL = 2 kΩ,
CL = 25 pF
25°C
478
637
478
637
kHz
φm
Phase margin at
unity gain
VI = 10 mV,
CL = 25 pF,
25°C
RL = 2 kΩ,
See Figure 2
RL = 2 kΩ,
See Figure 2
57°
fA/√Hz
57°
† Full range is 0°C to 70°C.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–9
TLE2082, TLE2082A, TLE2082Y
EXCALIBUR HIGH-SPEED
JFET-INPUT DUAL OPERATIONAL AMPLIFIERS
SLOS105A – AUGUST 1991 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±5 V (unless otherwise noted)
PARAMETER
VIO
Input offset voltage
αVIO
Temperature coefficient
of input offset voltage
IIO
Input offset current
IIB
TEST CONDITIONS
TA†
25°C
VIC = 0,
0
RS = 50 Ω
VO = 0,
0
F ll range
Full
g
IO = – 200 µA
Maximum positive peak
VOM +
output voltage swing
IO = – 2 mA
IO = – 20 mA
IO = 200 µA
VOM –
M i
Maximum
negative
i peak
k
output voltage swing
IO = 2 mA
IO = 20 mA
RL = 600 Ω
AVD
Large signal
L
Large-signal
i
l diff
differential
i l
voltage amplification
VO = ± 2
2.3
3 V RL = 2 kΩ
RL = 10 kΩ
ri
Input resistance
Common mode
ci
Input
capacitance
zo
Open-loop output impedance
Differential
VIC = 0
VIC = 0
0,
See Figure 5
25°C
3.8
Full range
3.7
25°C
3.5
Full range
3.4
25°C
1.5
Full range
1.5
25°C
– 3.8
Full range
– 3.7
25°C
– 3.5
Full range
– 3.4
25°C
– 1.5
Full range
– 1.5
25°C
80
Full range
79
25°C
90
Full range
89
25°C
95
Full range
94
µV/°C
5
100
5
100
pA
5
nA
15
175
15
175
pA
10
nA
5
to
–1
5
to
– 1.9
4.1
3.8
4.1
3.7
3.9
3.5
3.9
2.3
1.5
2.3
1.5
– 4.2
– 3.8
– 4.2
– 3.7
– 4.1
– 3.5
– 4.1
– 2.4
– 1.5
– 2.4
– 1.5
91
80
91
79
100
90
100
95
106
94
2.5
VCC ± = ± 5 V to ± 15 V,
VO = 0,
RS = 50 Ω
25°C
82
Full range
80
ICC
Supply current (both channels)
VO = 0
0,
80
25°C
2.7
Full range
† Full range is – 40°C to 85°C.
• DALLAS, TEXAS 75265
dB
89
106
2.5
Supply voltage rejection ratio
Supply-voltage
(∆VCC± /∆VIO)
V
– 3.4
25°C
kSVR
V
3.4
11
68
V
5
to
– 0.8
11
Full range
POST OFFICE BOX 655303
5
to
– 1.9
25°C
VIC = VICRmin,
VO = 0,
RS = 50 Ω
mV
25
1012
CMRR Common-mode rejection ratio
UNIT
2.4
1012
70
4
5.5
25°C
25°C
MAX
25
5
to
– 0.8
25°C
5–10
0.65
10
5
to
–1
f = 1 MHz
No load
7
TYP
2.4
Full range
RS = 50 Ω
MIN
5
25°C
Input bias current
TLE2082AI
MAX
8.5
Full range
25°C
VICR
0.9
Full range
VO = 0,
0
TYP
Full range
25°C
VIC = 0,
0
See Figure 4
Common mode
C
Common-mode
d input
i
voltage
g range
g
TLE2082I
MIN
Ω
pF
Ω
80
89
70
89
dB
68
99
82
99
dB
80
2.9
3.6
3.6
2.7
2.9
3.6
3.6
mA
TLE2082, TLE2082A, TLE2082Y
EXCALIBUR HIGH-SPEED
JFET-INPUT DUAL OPERATIONAL AMPLIFIERS
SLOS105A – AUGUST 1991 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±5 V (unless otherwise noted)
(continued)
PARAMETER
Crosstalk attenuation
IOS
Short-circuit output current
TEST CONDITIONS
VIC = 0,
RL = 2 kΩ
VO = 0
VID = 1 V
VID = – 1 V
TLE2082I
TA
MIN
25°C
25°C
TYP
TLE2082AI
MAX
MIN
TYP
120
120
– 35
– 35
45
45
MAX
UNIT
dB
mA
operating characteristics at specified free-air temperature, VCC± = ±5 V
PARAMETER
TEST CONDITIONS
TA†
TLE2082I
MIN
TYP
25°C
SR +
Positive
rate
P i i slew
l
SR –
Negative
rate
N
i slew
l
ts
Vn
VN(PP)
Settling time
2.3
V,
VO(PP) = ± 2
3V
AVD = – 1,
1
RL = 2 kΩ
kΩ,
See Figure 1
CL = 100 pF,
AVD = – 1,
2
V step,
2-V
RL = 1 kΩ,
CL = 100 pF
20
TYP
38
20
38
V/µs
V/
20
0.25
0.25
0.4
0.4
µs
To 1 mV
f = 10 Hz to
10 kHz
UNIT
V/µs
V/
25°C
f = 10 kHz
MAX
35
20
To 10 mV
f = 10 Hz
RS = 20 Ω,
Ω,
See Figure 3
MIN
35
25°C
Full
range
Equivalent input noise
voltage
Peakk to peakk equivalent
P
Peak-to-peak
i l
input noise voltage
Full
range
TLE2082AI
MAX
25°C
28
28
11.6
11.6
6
6
06
0.6
06
0.6
nV/√Hz
V
µV
25°C
f = 0.1 Hz to
10 Hz
In
Equivalent input noise
current
VIC = 0,
f = 10 kHz
25°C
2.8
2.8
THD + N
Total harmonic distortion
plus noise
VO(PP) = 5 V,
f = 1 kHz,
kHz
RS = 25 Ω
AVD = 10,
RL = 2 kΩ
kΩ,
25°C
0 013%
0.013%
0 013%
0.013%
B1
Unity-gain bandwidth
VI = 10 mV,
CL = 25 pF,
RL = 2 kΩ,
See Figure 2
25°C
94
9.4
94
9.4
MHz
BOM
Maximum output
output-swing
swing
bandwidth
VO(PP) = 4 V,,
RL = 2 kΩ ,
AVD = – 1,,
CL = 25 pF
25°C
28
2.8
28
2.8
MHz
φm
Phase margin
g at unity
y
gain
VI = 10 mV,,
CL = 25 pF,
RL = 2 kΩ,,
See Figure 2
25°C
56°
56°
fA/√Hz
† Full range is 40°C to 85°C.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–11
TLE2082, TLE2082A, TLE2082Y
EXCALIBUR HIGH-SPEED
JFET-INPUT DUAL OPERATIONAL AMPLIFIERS
SLOS105A – AUGUST 1991 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±15 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
Input offset voltage
αVIO
Temperature coefficient
of input offset voltage
IIO
Input offset current
VIC = 0,
0
RS = 50 Ω
VO = 0,
0
VO = 0,
0
RS = 50 Ω
IO = – 200 µA
M i
Maximum
positive
i i peak
k
VOM +
output voltage swing
IO = – 2 mA
IO = – 20 mA
IO = 200 µA
M i
Maximum
negative
i peak
k
output voltage swing
IO = 2 mA
IO = 20 mA
RL = 600 Ω
AVD
Large signal
L
Large-signal
i
l diff
differential
i l
voltage amplification
VO = ± 10 V
RL = 2 kΩ
RL = 10 kΩ
ri
ci
Input resistance
Input
capacitance
VIC = 0
Common
mode
VIC = 0,
See Figure 5
Differential
zo
Open-loop output impedance
13.8
Full range
13.7
25°C
13.5
Full range
13.4
25°C
11.5
Full range
11.5
25°C
– 13.8
Full range
– 13.7
25°C
– 13.5
Full range
– 13.4
25°C
– 11.5
Full range
– 11.5
25°C
80
Full range
79
25°C
90
Full range
89
25°C
95
Full range
94
µV/°C
6
100
6
100
pA
5
nA
20
175
20
175
pA
10
nA
15
to
– 11
15
to
– 11.9
14.1
13.8
14.1
13.7
13.9
13.5
13.9
12.3
11.5
12.3
11.5
– 14.2
– 13.8
– 14.2
– 13.7
– 14
–13.5
– 14
– 12.4
– 11.5
– 12.4
– 11.5
96
80
96
79
109
90
109
118
95
118
94
25°C
2.5
2.5
80
79
kSVR
Supply-voltage
Supply
voltage rejection ratio
(∆VCC± /∆VIO)
VCC ± = ± 5 V to ± 15 V,
VO = 0,
RS = 50 Ω
25°C
82
Full range
80
ICC
Supply current
(both channels)
VO = 0
0,
25°C
2.7
Full range
† Full range is – 40°C to 85°C.
• DALLAS, TEXAS 75265
dB
89
7.5
Full range
V
– 13.4
7.5
VIC = VICRmin,
VO = 0,
RS = 50 Ω
V
13.4
25°C
Common mode
Common-mode
rejection ratio
V
15
to
– 10.8
1012
80
POST OFFICE BOX 655303
15
to
– 11.9
1012
25°C
mV
25
25°C
25°C
4
UNIT
2.4
15
to
– 10.8
25°C
MAX
5.5
10
15
to
– 11
CMRR
5–12
0.7
5
f = 1 MHz
No load
7
TYP
25
Full range
Common mode
C
Common-mode
d input
i
voltage
g range
g
MIN
2.4
Full range
25°C
Input bias current
TLE2082AI
MAX
8.5
Full range
F ll range
Full
g
VOM –
1.1
25°C
VIC = 0,
0
See Figure 4
TYP
Full range
25°C
VICR
TLE2082I
MIN
25°C
VIO
IIB
TA†
Ω
pF
Ω
80
98
80
98
dB
79
99
82
99
dB
80
3.1
3.6
3.6
2.7
3.1
3.6
3.6
mA
TLE2082, TLE2082A, TLE2082Y
EXCALIBUR HIGH-SPEED
JFET-INPUT DUAL OPERATIONAL AMPLIFIERS
SLOS105A – AUGUST 1991 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±15 V (unless otherwise noted)
(continued)
PARAMETER
Crosstalk attenuation
IOS
Short-circuit output current
TEST CONDITIONS
VIC = 0,
RL = 2 kΩ
VO = 0
VID = 1 V
VID = – 1 V
TLE2082I
TA
MIN
TYP
– 30
30
25°C
25°C
TLE2082AI
MAX
MIN
TYP
– 45
– 30
– 45
48
30
48
120
MAX
120
UNIT
dB
mA
operating characteristics at specified free-air temperature, VCC± = ±15 V
PARAMETER
SR +
Positive
rate
P i i slew
l
SR –
Negative
rate
N
i slew
l
ts
Vn
VN(PP)
Settling time
TEST CONDITIONS
VO(PP) = 10 V,
V AVD = – 1,
1
RL = 2 kΩ
kΩ,
CL = 100 pF,
pF
See Figure 1
AVD = – 1,
10
V step,
10-V
RL = 1 kΩ,
CL = 100 pF
Peakk to peakk equivalent
P
Peak-to-peak
i l
input noise voltage
TYP
25°C
28
40
Full
range
22
25°C
30
Full
range
22
TLE2082AI
MAX
MIN
TYP
28
40
45
30
UNIT
45
V/µs
V/
22
0.4
0.4
1.5
1.5
µs
To 1 mV
f = 10 Hz to
10 kHz
MAX
V/µs
V/
22
25°C
f = 10 kHz
RS = 20 Ω,
Ω,
See Figure 3
TLE2082I
MIN
To 10 mV
f = 10 Hz
Equivalent input noise
voltage
TA†
25°C
28
28
11.6
11.6
6
6
06
0.6
06
0.6
nV/√Hz
V
µV
25°C
f = 0.1 Hz to
10 Hz
In
Equivalent input noise
current
VIC = 0,
f = 10 kHz
25°C
2.8
2.8
THD + N
Total harmonic distortion
plus noise
VO(PP) = 20 V, AVD = 10,
f = 1 kHz,
kHz
RL = 2 kΩ
kΩ,
RS = 25 Ω
25°C
0 008%
0.008%
0 008%
0.008%
B1
Unity-gain bandwidth
VI = 10 mV,
CL = 25 pF,
25°C
8
10
8
10
MHz
BOM
Maximum output
output-swing
swing
bandwidth
VO(PP) = 20 V,, AVD = – 1,,
RL = 2 kΩ,
CL = 25 pF
25°C
478
637
478
637
kHz
φm
Phase margin
g at unity
y
gain
VI = 10 mV,,
CL = 25 pF,
25°C
RL = 2 kΩ,
See Figure 2
RL = 2 kΩ,,
See Figure 2
57°
fA/√Hz
57°
† Full range is – 40°C to 85°C.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–13
TLE2082, TLE2082A, TLE2082Y
EXCALIBUR HIGH-SPEED
JFET-INPUT DUAL OPERATIONAL AMPLIFIERS
SLOS105A – AUGUST 1991 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±5 V (unless otherwise noted)
PARAMETER
VIO
Input offset voltage
αVIO
Temperature coefficient
of input offset voltage
IIO
Input offset current
IIB
TEST CONDITIONS
TA†
25°C
VIC = 0,
0
RS = 50 Ω
VO = 0,
0
F ll range
Full
g
IO = – 200 µA
Maximum positive peak
VOM +
output voltage swing
IO = – 2 mA
IO = – 20 mA
IO = 200 µA
VOM –
M i
Maximum
negative
i peak
k
output voltage swing
IO = 2 mA
IO = 20 mA
RL = 600 Ω
AVD
Large signal
L
Large-signal
i
l diff
differential
i l
voltage amplification
VO = ± 2
2.3
3V
RL = 2 kΩ
RL = 10 kΩ
ri
Input resistance
Common mode
ci
Input
capacitance
zo
Open-loop output impedance
Differential
VIC = 0
VIC = 0
0,
See Figure 5
25°C
3.8
Full range
3.6
25°C
3.5
Full range
3.3
25°C
1.5
Full range
1.4
25°C
– 3.8
Full range
– 3.6
25°C
– 3.5
Full range
– 3.3
25°C
– 1.5
Full range
– 1.4
25°C
80
Full range
78
25°C
90
Full range
88
25°C
95
Full range
93
µV/°C
5
100
5
100
pA
20
nA
15
175
15
175
pA
60
nA
5
to
–1
5
to
– 1.9
5
to
– 0.8
4.1
3.8
3.6
3.9
3.5
3.9
3.3
2.3
1.5
2.3
– 4.2
– 3.8
– 4.2
– 3.6
– 4.1
– 3.5
– 4.1
– 3.3
– 2.4
– 1.5
– 2.4
91
80
91
78
100
90
100
95
106
93
2.5
25°C
82
Full range
80
80
∗On products compliant to MIL-STD-883, Class B, this parameter is not production tested.
† Full range is – 55°C to 125°C.
• DALLAS, TEXAS 75265
dB
88
106
2.5
VCC ± = ± 5 V to ± 15 V,
VO = 0,
RS = 50 Ω
V
– 1.4
25°C
Supply-voltage
pp y
g rejection
j
ratio
(∆VCC± /∆VIO)
V
1.4
11
68
V
4.1
11
Full range
POST OFFICE BOX 655303
5
to
– 1.9
25°C
VIC = VICRmin,
VO = 0,
RS = 50 Ω
mV
25∗
1012
CMRR Common-mode rejection ratio
UNIT
2.3
1012
70
4
6.5
25°C
25°C
MAX
25∗
5
to
– 0.8
25°C
5–14
0.65
60
5
to
–1
f = 1 MHz
kSVR
7
TYP
2.3
Full range
RS = 50 Ω
MIN
20
25°C
Input bias current
TLE2082AM
MAX
9.5
Full range
25°C
VICR
0.9
Full range
VO = 0,
0
TYP
Full range
25°C
VIC = 0,
0
See Figure 4
Common mode
C
Common-mode
d input
i
voltage
g range
g
TLE2082M
MIN
89
80
70
89
68
99
82
80
99
Ω
pF
Ω
dB
dB
TLE2082, TLE2082A, TLE2082Y
EXCALIBUR HIGH-SPEED
JFET-INPUT DUAL OPERATIONAL AMPLIFIERS
SLOS105A – AUGUST 1991 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±5 V (unless otherwise noted)
(continued)
PARAMETER
ICC
IOS
TA†
TEST CONDITIONS
25°C
Supply current
(both channels)
VO = 0
0,
No load
Crosstalk attenuation
VIC = 0,
RL = 2 kΩ
25°C
Short circuit output
Short-circuit
current
VO = 0
VID = 1 V
VID = – 1 V
25°C
TLE2082M
TLE2082AM
MIN
TYP
MAX
MIN
TYP
MAX
2.7
2.9
3.6
2.7
2.9
3.6
Full range
3.6
3.6
120
120
– 35
– 35
45
45
UNIT
mA
dB
mA
† Full range is – 55°C to 125°C.
operating characteristics at specified free-air temperature, VCC± = ±5 V
PARAMETER
TEST CONDITIONS
TA†
TLE2082M
MIN
TYP
25°C
SR +
Positive
rate
P i i slew
l
SR –
Negative
rate
N
i slew
l
ts
Vn
VN(PP)
Settling time
2.3
V,
VO(PP) = ± 2
3V
AVD = – 1,
1
RL = 2 kΩ
kΩ,
See Figure 1
CL = 100 pF,
AVD = – 1,
2-V
2
V step,
RL = 1 kΩ,
CL = 100 pF
18∗
TYP
38
18∗
38
V/µs
V/
18∗
0.25
0.25
0.4
0.4
µs
To 1 mV
f = 10 Hz to
10 kHz
UNIT
V/µs
V/
25°C
f = 10 kHz
MAX
35
18∗
To 10 mV
f = 10 Hz
RS = 20 Ω,
Ω,
See Figure 3
MIN
35
25°C
Full
range
Equivalent input noise
voltage
Peak
Peak-to-peak
P k to peakk equivalent
i l
input noise voltage
Full
range
TLE2082AM
MAX
25°C
28
28
11.6
11.6
6
6
06
0.6
06
0.6
nV/√Hz
µV
V
25°C
f = 0.1 Hz to
10 Hz
In
Equivalent input noise
current
VIC = 0,
f = 10 kHz
25°C
2.8
2.8
THD + N
Total harmonic
distortion plus noise
VO(PP) = 5 V,
f = 1 kHz,
kHz
RS = 25 Ω
AVD = 10,
RL = 2 kΩ
kΩ,
25°C
0 013%
0.013%
0 013%
0.013%
B1
Unity-gain bandwidth
VI = 10 mV,
CL = 25 pF,
RL = 2 kΩ,
See Figure 2
25°C
94
9.4
94
9.4
MHz
BOM
output-swing
Maximum output
swing
bandwidth
VO(PP) = 4 V,,
RL = 2 kΩ ,
AVD = – 1,,
CL = 25 pF
25°C
28
2.8
28
2.8
MHz
φm
Phase margin
g at unity
y
gain
VI = 10 mV,,
CL = 25 pF,
RL = 2 kΩ,,
See Figure 2
25°C
56°
56°
fA/√Hz
∗On products compliant to MIL-STD-883, Class B, this parameter is not production tested.
† Full range is – 55°C to 125°C.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–15
TLE2082, TLE2082A, TLE2082Y
EXCALIBUR HIGH-SPEED
JFET-INPUT DUAL OPERATIONAL AMPLIFIERS
SLOS105A – AUGUST 1991 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±15 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
Input offset voltage
αVIO
Temperature coefficient
of input offset voltage
IIO
Input offset current
VIC = 0,
0
RS = 50 Ω
VO = 0,
0
VO = 0,
0
RS = 50 Ω
IO = – 200 µA
M i
Maximum
positive
i i peak
k
output voltage swing
IO = – 2 mA
IO = – 20 mA
IO = 200 µA
VOM –
M i
Maximum
negative
i peak
k
output voltage swing
IO = 2 mA
IO = 20 mA
RL = 600 Ω
AVD
Large signal
L
Large-signal
i
l diff
differential
i l
voltage amplification
VO = ± 10 V
RL = 2 kΩ
RL = 10 kΩ
ri
ci
Input resistance
Input
capacitance
VIC = 0
Common
mode
VIC = 0,
See Figure 5
Differential
zo
Open-loop output impedance
13.8
Full range
13.6
25°C
13.5
Full range
13.3
25°C
11.5
Full range
11.4
25°C
– 13.8
Full range
– 13.6
25°C
– 13.5
Full range
– 13.3
25°C
– 11.5
Full range
– 11.4
25°C
80
Full range
78
25°C
90
Full range
88
25°C
95
Full range
93
µV/°C
6
100
6
100
pA
20
nA
20
175
20
175
pA
65
nA
15
to
– 11.9
15
to
– 11
15
to
– 11.9
15
to
– 10.8
14.1
13.8
13.6
13.9
13.5
13.9
13.3
12.3
11.5
12.3
– 14.2
– 13.8
– 14.2
– 13.6
– 14
–13.5
– 14
– 13.3
– 12.4
– 11.5
– 12.4
96
80
96
78
109
90
109
88
118
95
118
7.5
25°C
2.5
2.5
80
Full range
78
kSVR
Supply-voltage
ratio
pp y
g rejection
j
(∆VCC± /∆VIO)
VCC ± = ± 5 V to ± 15 V,
VO = 0,
RS = 50 Ω
25°C
82
Full range
80
∗On products compliant to MIL-STD-883, Class B, this parameter is not production tested.
† Full range is – 55°C to 125°C.
• DALLAS, TEXAS 75265
dB
93
7.5
VIC = VICRmin,
VO = 0,
RS = 50 Ω
V
– 11.4
25°C
Common-mode rejection ratio
V
11.4
1012
80
V
14.1
1012
25°C
mV
25∗
25°C
25°C
4
UNIT
2.4
15
to
– 10.8
25°C
MAX
6.5
65
15
to
– 11
f = 1 MHz
POST OFFICE BOX 655303
0.7
20
CMRR
5–16
7
TYP
25∗
Full range
Common mode
C
Common-mode
d input
i
voltage
g range
g
MIN
2.4
Full range
25°C
Input bias current
TLE2082AM
MAX
9.5
Full range
F ll range
Full
g
VOM +
1.1
25°C
VIC = 0,
0
See Figure 4
TYP
Full range
25°C
VICR
TLE2082M
MIN
25°C
VIO
IIB
TA†
98
80
80
98
78
99
82
80
99
Ω
pF
Ω
dB
dB
TLE2082, TLE2082A, TLE2082Y
EXCALIBUR HIGH-SPEED
JFET-INPUT DUAL OPERATIONAL AMPLIFIERS
SLOS105A – AUGUST 1991 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±15 V (unless otherwise noted)
(continued)
PARAMETER
ICC
IOS
TA†
TEST CONDITIONS
25°C
Supply current
(both channels)
VO = 0
0,
No load
Crosstalk attenuation
VIC = 0,
RL = 2 kΩ
25°C
Short circuit output
Short-circuit
current
VO = 0
VID = 1 V
VID = – 1 V
25°C
TLE2082M
TLE2082AM
MIN
TYP
MAX
MIN
TYP
MAX
2.7
3.1
3.6
2.7
3.1
3.6
Full range
3.6
3.6
120
120
– 30
– 45
– 30
– 45
30
48
30
48
UNIT
mA
dB
mA
† Full range is – 55°C to 125°C.
operating characteristics at specified free-air temperature, VCC± = ±15 V
PARAMETER
SR +
Positive
rate
P i i slew
l
SR –
Negative
rate
N
i slew
l
ts
Vn
VN(PP)
Settling time
TEST CONDITIONS
VO(PP) = 10 V,
V AVD = – 1,
1
RL = 2 kΩ
kΩ,
CL = 100 pF,
pF
See Figure 1
AVD = – 1,
10-V
10
V step,
RL = 1 kΩ,
CL = 100 pF
Peak
Peak-to-peak
P k to peakk equivalent
i l
input noise voltage
TYP
25°C
28
40
Full
range
20
25°C
30
Full
range
20
TLE2082AM
MAX
MIN
TYP
28
40
45
30
UNIT
45
V/µs
V/
20
0.4
0.4
1.5
1.5
µs
To 1 mV
f = 10 Hz to
10 kHz
MAX
V/µs
V/
20
25°C
f = 10 kHz
RS = 20 Ω,
Ω,
See Figure 3
TLE2082M
MIN
To 10 mV
f = 10 Hz
Equivalent input noise
voltage
TA†
25°C
28
28
11.6
11.6
6
6
06
0.6
06
0.6
nV/√Hz
µV
V
25°C
f = 0.1 Hz to
10 Hz
In
Equivalent input noise
current
VIC = 0,
f = 10 kHz
25°C
2.8
2.8
THD + N
Total harmonic distortion
plus noise
VO(PP) = 20 V, AVD = 10,
f = 1 kHz,
kHz
RL = 2 kΩ
kΩ,
RS = 25 Ω
25°C
0 008%
0.008%
0 008%
0.008%
B1
Unity-gain bandwidth
VI = 10 mV,
CL = 25 pF,
25°C
8∗
10
8∗
10
MHz
BOM
Maximum output
output-swing
swing
bandwidth
VO(PP) = 20 V,, AVD = – 1,,
RL = 2 kΩ,
CL = 25 pF
25°C
478∗
637
478∗
637
kHz
φm
Phase margin
g at unity
y
gain
VI = 10 mV,,
CL = 25 pF,
25°C
RL = 2 kΩ,
See Figure 2
RL = 2 kΩ,,
See Figure 2
57°
fA/√Hz
57°
∗On products compliant to MIL-STD-883, Class B, this parameter is not production tested.
† Full range is – 55°C to 125°C.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–17
TLE2082, TLE2082A, TLE2082Y
EXCALIBUR HIGH-SPEED
JFET-INPUT DUAL OPERATIONAL AMPLIFIERS
SLOS105A – AUGUST 1991 – REVISED AUGUST 1994
electrical characteristics at VCC± = ±15 V, TA = 25°C
PARAMETER
VIO
IIO
Input offset voltage
IIB
Input bias current
VICR
C
Common-mode
d input
i p voltage
l g range
g
RS = 50 Ω
Maximum
positive
peak
M i
p
ii p
k output
p voltage
l g swing
i g
VOM +
VOM –
AVD
ri
VIC = 0,
Input offset current
VIC = 0
0,
Maximum
negative
g i peak
p k output
p voltage
M i
l g swing
i g
L g ig l differential
Large-signal
diff
i l voltage
l g amplification
plifi i
Input resistance
MIN
TYP
RS = 50 Ω
VO = 0,
VO = 0
0,
See Figure 4
175
pA
13.5
13.9
IO = – 20 mA
IO = 200 µA
11.5
12.3
– 13.8
– 14.2
– 13.5
– 14
– 11.5
– 12.4
RL = 600 Ω
80
96
RL = 2 kΩ
90
109
RL = 10 kΩ
95
118
VO = 0
0,
V
V
V
dB
Ω
1012
zo
Open-loop output impedance
f = 1 MHz
CMRR
Common-mode rejection ratio
kSVR
Supply-voltage rejection ratio (∆VCC± /∆VIO)
VIC = VICRmin, VO = 0,
VCC ± = ± 5 V to ±15 V,
RS = 50 Ω
ICC
Supply current (both channels)
Short-circuit output current
pA
20
14.1
Input capacitance
Differential
mV
13.8
VIC = 0
Common mode
6
100
IO = – 200 µA
IO = – 2 mA
VO = ± 10 V
7.5
See Figure 5
VO = 0,
No load
VO = 0
VID = 1 V
VID = – 1 V
pF
2.5
80
Ω
RS = 50 Ω
80
98
dB
VO = 0,
82
99
dB
2.7
3.1
– 30
– 45
30
48
3.6
2 kΩ
10 kΩ
VCC +
VI
VCC +
–
+
VCC –
5–18
VO
RL
VI
100 Ω
–
+
VO
VCC –
CL†
RL
CL†
† Includes fixture capacitance
† Includes fixture capacitance
Figure 1. Slew-Rate Test Circuit
Figure 2. Unity-Gain Bandwidth
and Phase-Margin Test Circuit
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
mA
mA
PARAMETER MEASUREMENT INFORMATION
2 kΩ
UNIT
6
15
to
11.9
IO = 2 mA
IO = 20 mA
MAX
1.1
15
to
– 11
ci
IOS
TLE2082Y
TEST CONDITIONS
TLE2082, TLE2082A, TLE2082Y
EXCALIBUR HIGH-SPEED
JFET-INPUT DUAL OPERATIONAL AMPLIFIERS
SLOS105A – AUGUST 1991 – REVISED AUGUST 1994
PARAMETER MEASUREMENT INFORMATION
2 kΩ
VCC +
–
+
RS
RS
VCC +
Ground Shield
–
+
VO
VO
VCC –
Picoammeters
VCC –
Figure 3. Noise-Voltage Test Circuit
Figure 4. Input-Bias and OffsetCurrent Test Circuit
VCC +
IN –
–
Cid
IN +
Cic
VO
+
Cic
VCC –
Figure 5. Internal Input Capacitance
typical values
Typical values presented in this data sheet represent the median (50% point) of device parametric performance.
input bias and offset current
At the picoampere bias-current level typical of the TLE2082 and TLE2082A, accurate measurement of the bias
becomes difficult. Not only does this measurement require a picoammeter, but test socket leakages can easily
exceed the actual device bias currents. To accurately measure these small currents, Texas Instruments uses
a two-step process. The socket leakage is measured using picoammeters with bias voltages applied but with
no device in the socket. The device is then inserted in the socket, and a second test is performed that measures
both the socket leakage and the device input bias current. The two measurements are then subtracted
algebraically to determine the bias current of the device.
TYPICAL CHARACTERISTICS
Table of Graphs
FIGURE
VIO
αVIO
Input offset voltage
Distribution
6
Temperature coefficient
Distribution
7
IIO
Input offset current
vs Free-air temperature
8, 9
IIB
Input bias current
vs Free-air temperature
p
vs Total supply voltage
8,, 9
10
VICR
VID
Common-mode input voltage range
vs Free-air temperature
Differential input voltage
vs Output voltage
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
11
12, 13
5–19
TLE2082, TLE2082A, TLE2082Y
EXCALIBUR HIGH-SPEED
JFET-INPUT DUAL OPERATIONAL AMPLIFIERS
SLOS105A – AUGUST 1991 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS
Table of Graphs (Continued)
FIGURE
VOM +
VOM –
Maximum positive peak output voltage
vs Output current
Maximum negative peak output voltage
vs Output current
|VOM |
Maximum peak output voltage
vs Free-air temperature
p
vs Supply voltage
VO(PP)
Maximum peak-to-peak output voltage
vs Frequency
19
VO
Output voltage
vs Settling time
20
AVD
Large-signal differential voltage amplification
vs Load resistance
vs Free-air temperature
21
22, 23
AVD
Small-signal differential voltage amplification
vs Frequency
24, 25
CMRR
Common-mode rejection ratio
vs Frequency
q
y
vs Free-air temperature
26
27
kSVR
Supply-voltage rejection ratio
vs Frequency
q
y
vs Free-air temperature
28
29
ICC
S pply current
Supply
vs Supply voltage
vs Free-air temperature
p
vs Differential input voltage
IOS
Sh
Short-circuit
i i output
p current
vs Supply voltage
vs Elapsed
p
time
vs Free-air temperature
SR
Sl
Slew
rate
Free-air
vs Free
air temperature
vs Load resistance
vs Differential input voltage
Vn
Equivalent input noise voltage
vs Frequency
41
Vn
Input-referred noise voltage
vs Noise bandwidth
Over a 10-second time interval
42
43
15
16,, 17
18
30
31
32, 33
34
35
36
37, 38
39
40
Third-octave spectral noise density
vs Frequency bands
THD + N
Total harmonic distortion plus noise
vs Frequency
B1
Unity-gain bandwidth
vs Load capacitance
47
Gain-bandwidth product
vs Free-air temperature
p
vs Supply voltage
48
49
Gain margin
vs Load capacitance
50
Phase
margin
Ph
gi
vs Free
Free-air
air temperature
vs Supply
pp y voltage
g
vs Load capacitance
51
52
53
Phase shift
vs Frequency
Large-signal pulse response, noninverting
vs Time
54
Small-signal pulse response
vs Time
55
Closed-loop output impedance
vs Frequency
56
Crosstalk attenuation
vs Frequency
57
φm
zo
5–20
14
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
44
45, 46
24, 25
TLE2082, TLE2082A, TLE2082Y
EXCALIBUR HIGH-SPEED
JFET-INPUT DUAL OPERATIONAL AMPLIFIERS
SLOS105A – AUGUST 1991 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
DISTRIBUTION OF TLE2082
INPUT OFFSET VOLTAGE
DISTRIBUTION OF TLE2082 INPUT OFFSET
VOLTAGE TEMPERATURE COEFFICIENT
20
Percentage of Units – %
16
27
Percentage of Amplifiers – %
18
30
600 Units Tested From One Wafer Lot
VCC = ± 15 V
TA = 25°C
P Package
14
12
10
8
6
4
2
24
310 Amplifiers
VCC = ± 15 V
TA = – 55°C to 125°C
P Package
21
18
15
12
9
6
3
0
– 4 – 3.2 – 2.4 – 1.6 – 0.8 0
0.8 1.6
2.4 3.2
0
– 30 – 24 –18 –12 – 6
4
INPUT BIAS CURRENT AND
INPUT OFFSET CURRENT
vs
FREE-AIR TEMPERATURE
100
VCC ± = ± 5 V
VIC = 0
VO = 0
1
IIO
0.1
IIB
0.01
0.001
– 75 – 55 – 35 – 15 – 5
25
6
12
18
24
30
Figure 7
45
65
85 105 125
I IO – Input Bias and Input Offset Currents – nA
IIIB
IB and IIO
I IO – Input Bias and Input Offset Currents – nA
IIIB
IB and IIO
Figure 6
10
0
αVIO – Temperature Coefficient – µV/°C
VIO
V IO – Input Offset Voltage – mV
INPUT BIAS CURRENT AND
INPUT OFFSET CURRENT
vs
FREE-AIR TEMPERATURE
100
10
VCC ± = ± 15 V
VIC = 0
VO = 0
IIB
1
0.1
IIO
0.01
0.001
– 75 – 55 – 35 – 15
TA – Free-Air Temperature – °C
5
25
45
65
85 105 125
TA – Free-Air Temperature – °C
Figure 8
Figure 9
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–21
TLE2082, TLE2082A, TLE2082Y
EXCALIBUR HIGH-SPEED
JFET-INPUT DUAL OPERATIONAL AMPLIFIERS
SLOS105A – AUGUST 1991 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
INPUT BIAS CURRENT
vs
SUPPLY VOLTAGE
COMMON-MODE INPUT VOLTAGE RANGE
vs
FREE-AIR TEMPERATURE
10 6
VIC – Common-Mode Input Voltage Range – V
VIC
VCC + + 0.5
VICmax = VCC +
IIIB
IB – Input Bias Current – pA
10 5
TA = 125°C
VICmin
10 4
10 3
10 2
TA = 25°C
10 1
TA = – 55°C
10 0
0
5
10
15
20
25
30
35
40
45
RS = 50 Ω
VCC +
VICmax
VCC + – 0.5
VCC – + 3.5
VICmin
VCC – + 3
VCC – + 2.5
VCC – + 2
– 75 – 55 – 35 – 15
Figure 10
200
400
0
RL = 600 Ω
RL = 2 kΩ
RL = 10 kΩ
RL = 10 kΩ
– 100
RL = 2 kΩ
– 200
– 300
– 400
–5 –4
RL = 600 Ω
–3
– 2 – 10
VCC ± = ± 15 V
VIC = 0
RS = 50 Ω
TA = 25°C
300
100
0
65
85 105 125
DIFFERENTIAL INPUT VOLTAGE
vs
OUTPUT VOLTAGE
V
VID
ID – Differential Input Voltage – uV
µV
V
VID
ID – Differential Input Voltage – uV
µV
300
45
Figure 11
DIFFERENTIAL INPUT VOLTAGE
vs
OUTPUT VOLTAGE
VCC ± = ± 5 V
VIC = 0
RS = 50 Ω
TA = 25°C
25
TA – Free-Air Temperature – °C
VCC – Total Supply Voltage (Referred to VCC – ) – V
400
5
1
2
3
4
5
200
RL = 600 Ω
RL = 2 kΩ
100
0
RL = 10 kΩ
RL = 10 kΩ
– 100
RL = 2 kΩ
– 200
RL = 600 Ω
– 300
– 400
– 15
– 10
VO – Output Voltage – V
–5
0
5
10
VO – Output Voltage – V
Figure 12
Figure 13
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
5–22
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
15
TLE2082, TLE2082A, TLE2082Y
EXCALIBUR HIGH-SPEED
JFET-INPUT DUAL OPERATIONAL AMPLIFIERS
SLOS105A – AUGUST 1991 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
15
13.5
12
TA = – 55°C
10.5
9
7.5
TA = 25°C
6
TA = 125°C
4.5
TA = 85°C
3
VCC ± = ± 15 V
1.5
0
0
– 5 –10 –15 – 20 – 25 – 30 – 35 – 40 – 45 – 50
MAXIMUM NEGATIVE PEAK OUTPUT VOLTAGE
vs
OUTPUT CURRENT
V OM – – Maximum Negative Peak Output Voltage – V
VVOM
OM+ – Maximum Positive Peak Output Voltage – V
MAXIMUM POSITIVE PEAK OUTPUT VOLTAGE
vs
OUTPUT CURRENT
–15
–13.5
TA = – 55°C
–12
–10.5
TA = 25°C
–9
–7.5
–6
TA = 85°C
– 4.5
TA = 125°C
–3
VCC ± = ± 15 V
–1.5
0
0
5
IO – Output Current – mA
IO = – 20 mA
1
VCC ± = ± 5 V
–1
IO = 20 mA
–3
IO = 2 mA
–4
–5
– 75 – 55 – 35 –15
IO = 200 µA
5
25
30
35
40
45
50
45
MAXIMUM PEAK OUTPUT VOLTAGE
vs
FREE-AIR TEMPERATURE
| V OM | – Maximum Peak Output Voltage – V
| V OM | – Maximum Peak Output Voltage – V
IO = – 2 mA
3
–2
25
15
IO = – 200 µA
4
0
20
Figure 15
MAXIMUM PEAK OUTPUT VOLTAGE
vs
FREE-AIR TEMPERATURE
2
15
IO – Output Current – mA
Figure 14
5
10
65
85 105 125
IO = 200 µA
IO = – 200 µA
14.5
14
IO = 2 mA
IO = – 2 mA
13.5
13
IO = 20 mA
12.5
IO = – 20 mA
12
11.5
11
10.5
VCC ± = ± 15 V
10
– 75 – 55 – 35 –15
TA – Free-Air Temperature – °C
5
25
45
65
85 105 125
TA – Free-Air Temperature – °C
Figure 16
Figure 17
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–23
TLE2082, TLE2082A, TLE2082Y
EXCALIBUR HIGH-SPEED
JFET-INPUT DUAL OPERATIONAL AMPLIFIERS
SLOS105A – AUGUST 1991 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE
vs
FREQUENCY
V O(PP) – Maximum Peak-to-Peak Output Voltage – V
VO(PP)
MAXIMUM PEAK OUTPUT VOLTAGE
vs
SUPPLY VOLTAGE
25
VOM
VOM – Maximum Peak Output Voltage – V
TA = 25°C
20
IO = – 200 µA
15
IO = – 2 mA
10
5
IO = – 20 mA
0
IO = 20 mA
–5
IO = 2 mA
–10
IO = 200 µA
–15
– 20
– 25
0
2.5
5
7.5
10 12.5 15 17.5 20 22.5 25
30
VCC ± = ± 15 V
RL = 2 kΩ
25
20
TA = – 55°C
15
10
TA = 25°C,
125°C
VCC ± = ± 5 V
5
TA = – 55°C
0
100 k
1M
f – Frequency – Hz
|VCC ± | – Supply Voltage – V
Figure 18
LARGE-SIGNAL DIFFERENTIAL
VOLTAGE AMPLIFICATION
vs
LOAD RESISTANCE
125
12.5
10
10 mV
120
AVD
A
VD – Large-Signal Differential
Voltage Amplification – dB
7.5
1 mV
5
2.5
VCC ± = ± 15 V
RL = 1 kΩ
CL = 100 pF
AV = – 1
TA = 25°C
Rising
0
Falling
– 2.5
–5
ÁÁ
ÁÁ
ÁÁ
1 mV
– 7.5
10 mV
– 10
– 12.5
0
0.5
1
1.5
2
VIC = 0
RS = 50 Ω
TA = 25°C
115
110
VCC ± = ± 15 V
105
VCC ± = ± 5 V
100
95
90
0.1
ts – Settling Time – µs
1
10
RL – Load Resistance – kΩ
Figure 20
Figure 21
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
5–24
10 M
Figure 19
OUTPUT VOLTAGE
vs
SETTLING TIME
VO
VO – Output Voltage – V
TA = 25°C,
125°C
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
100
TLE2082, TLE2082A, TLE2082Y
EXCALIBUR HIGH-SPEED
JFET-INPUT DUAL OPERATIONAL AMPLIFIERS
SLOS105A – AUGUST 1991 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
LARGE-SIGNAL DIFFERENTIAL
VOLTAGE AMPLIFICATION
vs
FREE-AIR TEMPERATURE
LARGE-SIGNAL DIFFERENTIAL
VOLTAGE AMPLIFICATION
vs
FREE-AIR TEMPERATURE
125
110
107
VCC ± = ± 15 V
VO = ± 10 V
RL = 10 kΩ
121
ÁÁ
ÁÁ
ÁÁ
104
101
RL = 2 kΩ
98
95
92
86
VCC ± = ± 5 V
VO = ± 2.3 V
80
–75 – 55 – 35 –15
113
5
25
45
65
RL = 2 kΩ
109
105
101
Á
Á
Á
RL = 600 Ω
89
83
117
AVD
A
VD – Large-Signal Differential
Voltage Amplification – dB
AVD
A
VD – Large-Signal Differential
Voltage Amplification – dB
RL = 10 kΩ
RL = 600 Ω
97
93
89
85
–75 – 55 – 35 –15
85 105 125
5
25
45
65
85 105 125
TA – Free-Air Temperature – °C
TA – Free-Air Temperature – °C
Figure 22
Figure 23
SMALL-SIGNAL DIFFERENTIAL VOLTAGE
AMPLIFICATION AND PHASE SHIFT
vs
FREQUENCY
140
VCC ± = ± 15 V
RL = 2 kΩ
CL = 100 pF
TA = 25°C
Gain
100
80
20°
40°
60°
Phase Shift
60
80°
40
100°
20
120°
0
140°
– 20
160°
Phase Shift
AAVD
VD – Small-Signal Differential
Voltage Amplification – dB
120
0°
180°
– 40
1
10
100
1k
10 k 100 k 1 M
10 M 100 M
f – Frequency – Hz
Figure 24
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–25
TLE2082, TLE2082A, TLE2082Y
EXCALIBUR HIGH-SPEED
JFET-INPUT DUAL OPERATIONAL AMPLIFIERS
SLOS105A – AUGUST 1991 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
SMALL-SIGNAL DIFFERENTIAL VOLTAGE
AMPLIFICATION AND PHASE SHIFT
vs
FREQUENCY
30
80°
Phase Shift
20
100°
CL = 25 pF
10
120°
Gain
0
140°
Phase Shift
AAVD
VD – Small-Signal Differential
Voltage Amplification – dB
CL = 100 pF
CL = 100 pF
VCC ± = ± 15 V
VIC = 0
RC = 2 kΩ
TA = 25°C
– 10
CL = 25 pF
180°
100
– 20
1
4
10
160°
40
f – Frequency – MHz
Figure 25
COMMON-MODE REJECTION RATIO
vs
FREQUENCY
COMMON-MODE REJECTION RATIO
vs
FREE-AIR TEMPERATURE
100
CMRR – Common-Mode Rejection Ratio – dB
CMRR – Common-Mode Rejection Ratio – dB
100
VCC ± = ± 15 V
90
VCC ± = ± 5 V
80
70
60
50
40
30
VIC = 0
VO = 0
RS = 50 Ω
TA = 25°C
20
10
0
10
100
1k
10 k
100 k
1M
10 M
97
VCC ± = ± 15 V
94
91
88
VCC ± = ± 5 V
85
82
79
76
73
VIC = VICRmin
VO = 0
RS = 50 Ω
70
– 75 – 55 – 35 –15
5
25
45
65
85 105 125
TA – Free-Air Temperature – °C
f – Frequency – Hz
Figure 26
Figure 27
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
5–26
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLE2082, TLE2082A, TLE2082Y
EXCALIBUR HIGH-SPEED
JFET-INPUT DUAL OPERATIONAL AMPLIFIERS
SLOS105A – AUGUST 1991 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
SUPPLY-VOLTAGE REJECTION RATIO
vs
FREQUENCY
SUPPLY-VOLTAGE REJECTION RATIO
vs
FREE-AIR TEMPERATURE
120
kXXXX
SVR – Supply-Voltage Rejection Ratio – dB
kXXXX
SVR – Supply-Voltage Rejection Ratio – dB
120
kSVR +
100
80
60
kSVR –
40
∆ VCC ± = ± 5 V to ± 15 V
VIC = 0
VO = 0
RS = 50 Ω
TA = 25°C
20
0
– 20
10
100
1k
10 k
100 k
1M
114
kSVR +
108
102
96
90
kSVR –
84
78
72
66
∆ VCC ± = ± 5 V to ± 15 V
VIC = 0
VO = 0
RS = 50 Ω
60
– 75 – 55 – 35 –15
10 M
Figure 28
25
45
65
85 105 125
Figure 29
SUPPLY CURRENT
vs
SUPPLY VOLTAGE
SUPPLY CURRENT
vs
FREE-AIR TEMPERATURE
3.5
4
VIC = 0
VO = 0
No Load
3.8
3.4
VIC = 0
VO = 0
No Load
3.3
IICC
CC – Supply Current – mA
3.6
IICC
CC – Supply Current – mA
5
TA – Free-Air Temperature – °C
f – Frequency – Hz
3.4
TA = 125°C
3.2
3
TA = 25°C
2.8
2.6
TA = – 55°C
3.2
3
2.9
2.7
2.2
2.6
0
2.5
5
7.5
10 12.5 15 17.5 20 22.5 25
VCC ± = ± 5 V
2.8
2.4
2
VCC ± = ± 15 V
3.1
2.5
– 75 – 55 – 35 –15
5
25
45
65
85 105 125
TA – Free-Air Temperature – °C
|VCC ±| – Supply Voltage – V
Figure 30
Figure 31
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–27
TLE2082, TLE2082A, TLE2082Y
EXCALIBUR HIGH-SPEED
JFET-INPUT DUAL OPERATIONAL AMPLIFIERS
SLOS105A – AUGUST 1991 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS
SUPPLY CURRENT
vs
DIFFERENTIAL INPUT VOLTAGE
SUPPLY CURRENT
vs
DIFFERENTIAL INPUT VOLTAGE
14
25
VCC + = 5 V
VCC – = 0
VIC = 4.5 V
TA = 25°C
Open Loop
No Load
10
VCC ± = ± 15 V
VIC = 0
TA = 25°C
Open Loop
No Load
20
IICC
CC – Supply Current – mA
IICC
CC – Supply Current – mA
12
8
6
4
15
10
5
2
0
– 0.5
– 0.25
0
0.25
VID – Differential Input Voltage – V
0
–1.5
0.5
–1
Figure 32
48
40
VID = – 1 V
24
12
VO = 0
TA = 25°C
–12
– 24
VID = 1 V
– 48
IIOS
OS – Short-Circuit Output Current – mA
IIOS
OS – Short-Circuit Output Current – mA
50
– 36
1
1.5
VID = – 1 V
30
20
10
VCC ± = ± 15 V
VO = 0
TA = 25°C
0
–10
– 20
– 30
VID = 1 V
– 40
– 50
– 60
0
2.5
5
7.5
10 12.5 15 17.5 20 22.5 25
0
|VCC ± | – Supply Voltage – V
60
Figure 35
POST OFFICE BOX 655303
120
t – Elapsed Time – s
Figure 34
5–28
0.5
SHORT-CIRCUIT OUTPUT CURRENT
vs
ELAPSED TIME
60
0
0
Figure 33
SHORT-CIRCUIT OUTPUT CURRENT
vs
SUPPLY VOLTAGE
36
– 0.5
VID – Differential Input Voltage – V
• DALLAS, TEXAS 75265
180
TLE2082, TLE2082A, TLE2082Y
EXCALIBUR HIGH-SPEED
JFET-INPUT DUAL OPERATIONAL AMPLIFIERS
SLOS105A – AUGUST 1991 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
SHORT-CIRCUIT OUTPUT CURRENT
vs
FREE-AIR TEMPERATURE
SLEW RATE
vs
FREE-AIR TEMPERATURE
45
64
43
VID = – 1 V
VCC ± = ± 15 V
48
32
VCC ± = ± 5 V
16
0
– 16
VCC ± = ± 5 V
VID = 1 V
– 32
VCC ± = ± 15 V
– 48
– 64
41
V/µ s
SR – Slew Rate – V/xs
IIOS
OS – Short-Circuit Output Current – mA
80
VCC ± = ± 5 V
RL = 2 kΩ
CL = 100 pF
39
SR –
37
35
SR +
33
31
29
27
VO = 0
– 80
– 75 – 55 – 35 –15
5
25
45
65
25
– 75 – 55 – 35 –15
85 105 125
TA – Free-Air Temperature – °C
Figure 36
65
85 105 125
50
VCC ± = ± 15 V
RL = 2 kΩ
CL = 100 pF
40
Rising Edge
30
SR – Slew Rate – V/µ s
SR – Slew Rate – V/µ s
45
SLEW RATE
vs
LOAD RESISTANCE
70
62
25
Figure 37
SLEW RATE
vs
FREE-AIR TEMPERATURE
66
5
TA – Free-Air Temperature – °C
58
54
50
SR –
46
42
SR +
20
10
VCC ± = ± 5 V
VO ± = ± 2.5 V
0
–10
AV = – 1
CL = 100 pF
TA = 25°C
– 20
38
– 30
34
– 40
30
– 75 – 55 – 35 –15
Falling Edge
– 50
100
1k
5
25
45
65
85 105 125
VCC ± = ± 15 V
VO ± = ± 10 V
TA – Free-Air Temperature – °C
10 k
100 k
RL – Load Resistance – Ω
Figure 38
Figure 39
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–29
TLE2082, TLE2082A, TLE2082Y
EXCALIBUR HIGH-SPEED
JFET-INPUT DUAL OPERATIONAL AMPLIFIERS
SLOS105A – AUGUST 1991 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS
SLEW RATE
vs
DIFFERENTIAL INPUT VOLTAGE
50
EQUIVALENT INPUT NOISE VOLTAGE
vs
FREQUENCY
50
Hz
AV = – 1
SR – Slew Rate – V/µ s
30
V n – Equivalent Input Noise Voltage – nV/
Vn
40
AV = 1
Rising Edge
20
VCC ± = ± 15 V
VO ± = ± 10 V (10% – 90%)
CL = 100 pF
TA = 25°C
10
0
–10
– 20
– 30
Falling Edge
AV = – 1
– 40
AV = 1
– 50
0.1
0.4
1
4
VCC ± = ± 15 V
VIC = 0
RS = 20 Ω
TA = 25°C
45
40
35
30
25
20
15
10
5
0
10
10
100
VID – Differential Input Voltage – V
Figure 40
1.2
Vn – Input-Referred Noise Voltage – µV
Vn
Vn – Input-Referred Noise Voltage – µV
Vn
INPUT-REFERRED NOISE VOLTAGE
OVER A 10-SECOND TIME INTERVAL
VCC ± = ± 15 V
VIC = 0
RS = 20 Ω
TA = 25°C
10
Peak-to-Peak
1
RMS
0.1
0.01
0.9
VCC ± = ± 15 V
f = 0.1 to 10 Hz
TA = 25°C
0.6
0.3
0
– 0.3
– 0.6
1
10
100
1k
10 k
100 k
0
1
2
3
4
5
Figure 42
Figure 43
POST OFFICE BOX 655303
6
t – Time – s
Noise Bandwidth – Hz
5–30
10 k
Figure 41
INPUT-REFERRED NOISE VOLTAGE
vs
NOISE BANDWIDTH
100
1k
f – Frequency – Hz
• DALLAS, TEXAS 75265
7
8
9
10
TLE2082, TLE2082A, TLE2082Y
EXCALIBUR HIGH-SPEED
JFET-INPUT DUAL OPERATIONAL AMPLIFIERS
SLOS105A – AUGUST 1991 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS
THIRD-OCTAVE SPECTRAL NOISE DENSITY
vs
FREQUENCY BANDS
THD + N – Total Harmonic Distortion + Noise – %
Thrid-Octave Spectral Noise Density – dB
– 75
Start Frequency: 12.5 Hz
Stop Frequency: 20 kHz
VCC ± = ± 15 V
VIC = 0
TA = 25°C
– 80
– 85
– 90
– 95
–100
–105
–110
–115
10
15
20
25
30
TOTAL HARMONIC DISTORTION PLUS NOISE
vs
FREQUENCY
40
35
45
1
AV = 100, RL = 600 Ω
0.1
AV = 100, RL = 2 kΩ
AV = 10, RL = 600 Ω
AV = 10, RL = 2 kΩ
0.01
VCC ± = ± 5 V
VO(PP) = 5 V
TA = 25°C
Filter: 10-Hz to 500-kHz Band Pass
0.001
10
100
Frequency Bands
Figure 44
B1
B1 – Unity-Gain Bandwidth – MHz
THD + N – Total Harmonic Distortion + Noise – %
13
Filter: 10-Hz to 500-kHz Band Pass
VCC ± = ± 15 V
VO(PP) = 20 V
TA = 25°C
AV = 100, RL = 600 Ω
AV = 100, RL = 2 kΩ
AV = 10, RL = 600 Ω
AV = 10, RL = 2 kΩ
0.001
10
100 k
UNITY-GAIN BANDWIDTH
vs
LOAD CAPACITANCE
1
0.01
10 k
Figure 45
TOTAL HARMONIC DISTORTION PLUS NOISE
vs
FREQUENCY
0.1
1k
f – Frequency – Hz
VCC ± = ± 15 V
VIC = 0
VO = 0
RL = 2 kΩ
TA = 25°C
12
11
10
9
8
7
100
1k
10 k
100 k
0
f – Frequency – Hz
20
40
60
80
100
CL – Load Capacitance – pF
Figure 46
Figure 47
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–31
TLE2082, TLE2082A, TLE2082Y
EXCALIBUR HIGH-SPEED
JFET-INPUT DUAL OPERATIONAL AMPLIFIERS
SLOS105A – AUGUST 1991 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
GAIN-BANDWIDTH PRODUCT
vs
FREE-AIR TEMPERATURE
GAIN-BANDWIDTH PRODUCT
vs
SUPPLY VOLTAGE
13
f = 100 kHz
VIC = 0
VO = 0
RL = 2 kΩ
CL = 100 pF
12
Gain-Bandwidth Product – MHz
Gain-Bandwidth Product – MHz
13
11
VCC ± = ± 15 V
10
9
VCC ± = ± 5 V
8
7
–75 – 55 – 35 –15
f = 100 kHz
VIC = 0
VO = 0
RL = 2 kΩ
CL = 100 pF
TA = 25°C
12
11
10
9
8
7
5
25
45
65
85 105 125
0
5
TA – Free-Air Temperature – °C
Figure 48
20
25
PHASE MARGIN
vs
FREE-AIR TEMPERATURE
10
90°
VCC ± = ± 15 V
VIC = 0
VO = 0
RL = 2 kΩ
TA = 25°C
80°
VIC = 0
VO = 0
RL = 2 kΩ
70°
φ m – Phase Margin
xm
Gain Margin – dB
15
Figure 49
GAIN MARGIN
vs
LOAD CAPACITANCE
8
10
VCC +± | – Supply Voltage – V
|VCC
6
4
VCC ± = ± 15 V
CL = 25 pF
60°
VCC ± = ± 5 V
50°
VCC ± = ± 15 V
40°
30°
CL = 100 pF
VCC ± = ± 5 V
20°
2
10°
0
0
20
40
60
80
100
0°
–75 – 55 – 35 –15
5
25
45
65
85 105 125
TA – Free-Air Temperature – °C
CL – Load Capacitance – pF
Figure 50
Figure 51
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
5–32
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLE2082, TLE2082A, TLE2082Y
EXCALIBUR HIGH-SPEED
JFET-INPUT DUAL OPERATIONAL AMPLIFIERS
SLOS105A – AUGUST 1991 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
PHASE MARGIN
vs
LOAD CAPACITANCE
90°
90°
80°
80°
70°
70°
CL = 25 pF
60°
xm
φ m – Phase Margin
φ m – Phase Margin
xm
PHASE MARGIN
vs
SUPPLY VOLTAGE
50°
CL = 100 pF
40°
30°
VIC = 0
VO = 0
RL = 2 kΩ
TA = 25°C
20°
10°
60°
VCC ± = ± 15 V
50°
VCC ± = ± 5 V
40°
30°
VIC = 0
VO = 0
RL = 2 kΩ
TA = 25°C
20°
10°
0°
0°
0
4
8
12
16
20
0
20
|VCC ±| – Supply Voltage – V
40
60
80
100
CL – Load Capacitance – pF
Figure 52
Figure 53
NONINVERTING LARGE-SIGNAL
PULSE RESPONSE
SMALL-SIGNAL PULSE RESPONSE
100
15
TA = 25°C,
125°C
VO
VO – Output Voltage – mV
VO
VO – Output Voltage – V
10
TA = – 55°C
5
TA = – 55°C
0
TA = 25°C,
125°C
–5
VCC ± = ± 15 V
AV = 1
RL = 2 kΩ
CL = 100 pF
– 10
– 15
50
0
VCC ± = ± 15 V
AV = – 1
RL = 2 kΩ
CL = 100 pF
TA = 25°C
–50
–100
0
1
2
3
t – Time – µs
4
5
0
Figure 54
0.4
0.8
t – Time – µs
1.2
1.6
Figure 55
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–33
TLE2082, TLE2082A, TLE2082Y
EXCALIBUR HIGH-SPEED
JFET-INPUT DUAL OPERATIONAL AMPLIFIERS
SLOS105A – AUGUST 1991 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS
CLOSED-LOOP OUTPUT IMPEDANCE
vs
FREQUENCY
CROSSTALK ATTENUATION
vs
FREQUENCY
140
VCC ± = ± 15 V
TA = 25°C
120
10
1
Crosstalk Attenuation – dB
Ω
zzo
o – Closed-Loop Output Impedance – o
100
AV = 100
0.1
AV = 10
0.01
AV = 1
100
80
60
40
0.001
10
100
1k
10 k
100 k
1M
10 M
VCC ± = ± 15 V
VIC = 0
RL = 2 kΩ
TA = 25°C
20
10
Figure 56
5–34
100
1k
f – Frequency – Hz
f – Frequency – Hz
Figure 57
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
10 k
100 k
TLE2082, TLE2082A, TLE2082Y
EXCALIBUR HIGH-SPEED
JFET-INPUT DUAL OPERATIONAL AMPLIFIERS
SLOS105A – AUGUST 1991 – REVISED AUGUST 1994
APPLICATION INFORMATION
macromodel information
Macromodel information provided was derived using PSpice  Parts  model generation software. The Boyle
macromodel (see Note 4) and subcircuit in Figure 58 are generated using the TLE2082 typical electrical and
operating characteristics at TA = 25°C. Using this information, output simulations of the following key parameters
can be generated to a tolerance of 20% (in most cases):
•
•
•
•
•
•
Maximum positive output voltage swing
Maximum negative output voltage swing
Slew rate
Quiescent power dissipation
Input bias current
Open-loop voltage amplification
•
•
•
•
•
•
Unity-gain frequency
Common-mode rejection ratio
Phase margin
DC output resistance
AC output resistance
Short-circuit output current limit
NOTE 4: G.R. Boyle, B.M. Cohn, D. O. Pederson, and J. E. Solomon, “Macromodeling of Integrated Circuit Operational Amplifiers”, IEEE Journal
of Solid-State Circuits, SC-9, 353 (1974).
99
DIN
3
EGND +
VCC +
92
9
FB
–
+
91
90
RSS
ISS
RO2
–
+ DIP
+
VB
RP
VIP
VIN
HLIM
–
+
2
10
+
–
–
VC
R2
IN –
C2
J1
J2
–
7
6
DP
53
+
IN+
VLIM
1
11
DC
GA
12
GCM
–
8
C1
RD1
VCC –
RD2
54
4
–
RO1
DE
5
+
VE
OUT
.SUBCKT TLE2082 1 2 3 4 5
C1
11
12
2.2E–12
C2
6
7
10.00E–12
DC
5
53
DX
DE
54
5
DX
DLP
90
91
DX
DLN
92
90
DX
DP
4
3
DX
EGND
99
0
POLY (2) (3,0) (4,0) 0 .5 .5
FB
7
99
POLY (5) VB VC VE VLP
+ VLN 0 5.607E6 –6E6 6E6 6E6 –6E6
GA
6
0
11 12 333.0E–6
GCM
0
6
10 99 7.43E–9
ISS
3
10
DC 400.0E–6
HLIM
90
0
VLIM 1K
J1
11
2
10 JX
J2
12
1
10 JX
R2
6
9
100.0E3
RD1
4
11
3.003E3
RD2
4
12
3.003E3
R01
8
5
80
R02
7
99
80
RP
3
4
27.30E3
RSS
10
99
500.0E3
VB
9
0
DC 0
VC
3
53
DC 2.20
VE
54
4
DC 2.20
VLIM
7
8
DC 0
VLP
91
0
DC 45
VLN
0
92
DC 45
.MODEL DX D (IS=800.0E–18)
.MODEL JX PJF (IS=15.00E–12 BETA=554.5E–6
+ VTO= –.6)
.ENDS
Figure 58. Boyle Macromodel and Subcircuit
PSpice and Parts are trademarks of MicroSim Corporation.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–35
TLE2082, TLE2082A, TLE2082Y
EXCALIBUR HIGH-SPEED
JFET-INPUT DUAL OPERATIONAL AMPLIFIERS
SLOS105A – AUGUST 1991 – REVISED AUGUST 1994
5–36
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments (TI) reserves the right to make changes to its products or to discontinue any semiconductor
product or service without notice, and advises its customers to obtain the latest version of relevant information
to verify, before placing orders, that the information being relied on is current.
TI warrants performance of its semiconductor products and related software to the specifications applicable at
the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are
utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each
device is not necessarily performed, except those mandated by government requirements.
Certain applications using semiconductor products may involve potential risks of death, personal injury, or
severe property or environmental damage (“Critical Applications”).
TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED, OR WARRANTED
TO BE SUITABLE FOR USE IN LIFE-SUPPORT APPLICATIONS, DEVICES OR SYSTEMS OR OTHER
CRITICAL APPLICATIONS.
Inclusion of TI products in such applications is understood to be fully at the risk of the customer. Use of TI
products in such applications requires the written approval of an appropriate TI officer. Questions concerning
potential risk applications should be directed to TI through a local SC sales office.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards should be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance, customer product design, software performance, or
infringement of patents or services described herein. Nor does TI warrant or represent that any license, either
express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property
right of TI covering or relating to any combination, machine, or process in which such semiconductor products
or services might be or are used.
Copyright  1995, Texas Instruments Incorporated