IXGA 8N100 IXGP 8N100 IGBT VCES = 1000 V = 16 A IC25 VCE(sat) = 2.7 V Preliminary data sheet Symbol Test Conditions Maximum Ratings VCES TJ = 25°C to 150°C 1000 V VCGR TJ = 25°C to 150°C; RGE = 1 MW 1000 V VGES Continuous ±20 V VGEM Transient ±30 V IC25 TC = 25°C 16 A IC90 TC = 90°C 8 A ICM TC = 25°C, 1 ms 32 A SSOA VGE = 15 V, TVJ = 125°C, RG = 120 W ICM = 16 A (RBSOA) Clamped inductive load PC TC = 25°C TO-220AB (IXGP) G C E TO-263 (IXGA) @ 0.8 VCES 54 W -55 ... +150 °C TJM 150 °C Tstg -55 ... +150 °C 300 °C G E TJ Maximum lead temperature for soldering 1.6 mm (0.062 in.) from case for 10 s Md Mounting torque with screw M3 Mounting torque with screw M3.5 Weight TO-220 TO-263 0.45/4 Nm/lb.in. 0.55/5 Nm/lb.in. 4 2 g g C (TAB) Features • International standard packages JEDEC TO-220AB and TO-263AA • Low VCE(sat) - for minimum on-state conduction losses • MOS Gate turn-on - drive simplicity Applications Symbol Test Conditions (TJ = 25°C, unless otherwise specified) Min. Characteristic Values Typ. Max. BVCES IC = 1 mA, VGE = 0 V 1000 V VGE(th) IC = 250 mA, VCE = VGE ICES VCE = 0.8 VCES VGE = 0 V IGES VCE = 0 V, VGE = ±20 V VCE(sat) IC = ICE90, VGE = 15V 5.0 V TJ = 25°C 25 mA AC motor speed control DC servo and robot drives DC choppers Uninterruptible power supplies (UPS) Switch-mode and resonant-mode power supplies • Capacitor discharge TJ = 125°C 250 mA Advantages ±100 nA 2.7 V 2.5 IXYS reserves the right to change limits, test conditions, and dimensions. © 2000 IXYS All rights reserved 2.2 • • • • • • Easy to mount with one screw • Reduces assembly time and cost • High power density 98565B (7/00) 1-2 IXGA 8N100 IXGP 8N100 Symbol Test Conditions (TJ = 25°C, unless otherwise specified) gfs Characteristic Values Min. Typ. Max. IC = IC90 VCE = 10 V 4 7.6 S 40 A TO-263 AA (IXGA) Outline Pulse test, t ≤ 300 µs, duty cycle ≤ 2 % IC(on) VGE = 10 V, VCE = 10V C ies Coes VCE = 25 V, VGE = 0 V, f = 1 MHz C res Qg Qge IC = IC90, VGE = 15 V, VCE = 0.5 VCES Qgc Eoff Inductive load, TJ = 25°°C IC = IC90, VGE = 15 V VCE = 800 V, RG = Roff = 120 Ω Remarks: Switching times may increase for VCE (Clamp) > 0.8 VCES, higher TJ or increased RG td(on) Inductive load, TJ = 125°°C t ri IC td(on) t ri td(off) tfi Eon td(off) tfi Eoff = IC90, VGE = 15 V VCE = 800 V, RG = Roff = 120 Ω Remarks: Switching times may increase for VCE (Clamp) > 0.8 VCES, higher TJ or increased RG pF 34 pF 10 pF 22.5 nC 4.8 nC 8.5 nC Dim. Millimeter Min. Max. Inches Min. Max. 15 ns A A1 4.06 2.03 4.83 2.79 .160 .080 .190 .110 30 ns b b2 0.51 1.14 0.99 1.40 .020 .045 .039 .055 c c2 0.46 1.14 0.74 1.40 .018 .045 .029 .055 D D1 8.64 7.11 9.65 8.13 .340 .280 .380 .320 E E1 e 9.65 6.86 2.54 10.29 8.13 BSC .380 .270 .100 .405 .320 BSC L L1 L2 L3 L4 14.61 2.29 1.02 1.27 0 15.88 2.79 1.40 1.78 0.38 .575 .090 .040 .050 0 .625 .110 .055 .070 .015 R 0.46 0.74 .018 .029 600 1000 ns 390 900 ns 2.3 5.0 mJ 15 ns 30 ns 0.5 mJ 800 ns 630 ns 3.7 mJ TO-220 AB (IXGP) Outline RthJC RthCK 595 TO-220 2.3 K/W 0.5 K/W Dim. Min. Recommended Footprint A B C D E F G H J K M N Q R © 2000 IXYS All rights reserved Millimeter Min. Max. 12.70 13.97 14.73 16.00 9.91 10.66 3.54 4.08 5.85 6.85 2.54 3.18 1.15 1.65 2.79 5.84 0.64 1.01 2.54 BSC 4.32 4.82 1.14 1.39 0.35 0.56 2.29 2.79 IXYS MOSFETS and IGBTs are covered by one or more of the following U.S. patents: 4,835,592 4,881,106 5,017,508 5,049,961 5,187,117 5,486,715 4,850,072 4,931,844 5,034,796 5,063,307 5,237,481 5,381,025 Inches Min. Max. 0.500 0.550 0.580 0.630 0.390 0.420 0.139 0.161 0.230 0.270 0.100 0.125 0.045 0.065 0.110 0.230 0.025 0.040 0.100 BSC 0.170 0.190 0.045 0.055 0.014 0.022 0.090 0.110 2-2