Advance Technical Information IXGH 35N120C IXGT 35N120C IGBT Lightspeed Series Symbol Test Conditions Maximum Ratings VCES TJ = 25°C to 150°C 1200 V VCGR TJ = 25°C to 150°C; RGE = 1 MW 1200 V VGES Continuous ±20 V VGEM Transient ±30 V IC25 TC = 25°C 70 A IC90 TC = 90°C 35 A ICM TC = 25°C, 1 ms 140 A SSOA (RBSOA) VGE = 15 V, TVJ = 125°C, RG = 5 W Clamped inductive load PC TC = 25°C ICM = 90 @ 0.8 VCES A 300 W -55 ... +150 °C TJM 150 °C Tstg -55 ... +150 °C TJ Maximum Lead temperature for soldering 1.6 mm (0.062 in.) from case for 10 s Maximum Tab temperature for soldering SMD devices for 10 s VCES = 1200 V = 70 A IC25 VCE(sat) = 4.0 V tfi(typ) = 115 ns TO-268 (IXGT) G E (TAB) TO-247 AD (IXGH) G 300 °C 260 °C G = Gate, E = Emitter, C (TAB) C E C = Collector, TAB = Collector Features Md Mounting torque (M3) 1.13/10 Nm/lb.in. Weight TO-247 AD TO-268 6 4 g g • International standard packages JEDEC TO-268 surface and JEDEC TO-247 AD • Low switching losses • MOS Gate turn-on - drive simplicity Applications Symbol Test Conditions BVCES VGE(th) IC IC ICES VCE = VCES VGE = 0 V Characteristic Values (TJ = 25°C, unless otherwise specified) min. typ. max. = 1 mA, VGE = 0 V = 750 mA, VCE = VGE IGES VCE = 0 V, VGE = ±20 V VCE(sat) IC 1200 2.5 TJ = 25°C TJ = 125°C = IC90, VGE = 15 V TJ = 125°C IXYS reserves the right to change limits, test conditions, and dimensions. © 2000 IXYS All rights reserved 3.2 5 V V 250 5 mA mA ±100 nA 4.0 V V • • • • • AC motor speed control DC servo and robot drives DC choppers Uninterruptible power supplies (UPS) Switched-mode and resonant-mode power supplies Advantages • High power density • Suitable for surface mounting • Easy to mount with 1 screw, (isolated mounting screw hole) 98717 (4/18/2000) 1-2 IXGH 35N120C IXGT 35N120C Symbol Test Conditions Characteristic Values (TJ = 25°C, unless otherwise specified) min. typ. max. gfs IC = IC90; VCE = 10 V, Pulse test, t £ 300 ms, duty cycle £ 2 % C ies Coes VCE = 25 V, VGE = 0 V, f = 1 MHz C res Qg Qge IC = IC90, VGE = 15 V, VCE = 0.5 VCES Qgc td(on) Inductive load, TJ = 25°C t ri IC = IC90, VGE = 15 V VCE = 0.8 VCES, RG = Roff = 5 W td(off) tfi Eoff td(on) t ri Eon td(off) tfi Eoff 30 40 S 4620 pF 260 pF 90 pF 170 nC 28 nC 57 nC 50 ns 27 Remarks: Switching times may increase for VCE (Clamp) > 0.8 • VCES, higher TJ or increased RG Inductive load, TJ = 125°C IC = IC90, VGE = 15 V VCE = 0.8 VCES, RG = Roff = 5 W Remarks: Switching times may increase for VCE (Clamp) > 0.8 • VCES, higher TJ or increased RG Dim. Millimeter Min. Max. Inches Min. Max. A B 19.81 20.32 20.80 21.46 0.780 0.800 0.819 0.845 C D 15.75 16.26 3.55 3.65 0.610 0.640 0.140 0.144 mJ E F 4.32 5.49 5.4 6.2 0.170 0.216 0.212 0.244 55 ns G H 1.65 2.13 4.5 0.065 0.084 0.177 31 ns 2.6 mJ J K 1.0 1.4 10.8 11.0 0.040 0.055 0.426 0.433 220 ns L M 4.7 0.4 5.3 0.8 0.185 0.209 0.016 0.031 260 ns N 1.5 2.49 0.087 0.102 6.2 mJ 150 220 ns 115 190 ns 3.0 4.2 TO-268AA (D3 PAK) 0.42 K/W RthJC RthCK ns TO-247 AD (IXGH) Outline (TO-247) 0.25 K/W Min. Recommended Footprint Dim. A A1 A2 b b2 C D E E1 e H L L1 L2 L3 L4 © 2000 IXYS All rights reserved Millimeter Min. Max. 4.9 5.1 2.7 2.9 .02 .25 1.15 1.45 1.9 2.1 .4 .65 13.80 14.00 15.85 16.05 13.3 13.6 5.45 BSC 18.70 19.10 2.40 2.70 1.20 1.40 1.00 1.15 0.25 BSC 3.80 4.10 IXYS MOSFETS and IGBTs are covered by one or more of the following U.S. patents: 4,835,592 4,881,106 5,017,508 5,049,961 5,187,117 5,486,715 4,850,072 4,931,844 5,034,796 5,063,307 5,237,481 5,381,025 Inches Min. Max. .193 .201 .106 .114 .001 .010 .045 .057 .75 .83 .016 .026 .543 .551 .624 .632 .524 .535 .215 BSC .736 .752 .094 .106 .047 .055 .039 .045 .010 BSC .150 .161 2-2