MDD 95 IFRMS = 2x 180 A IFAVM = 2x 120 A VRRM = 800-2200 V Diode Modules VRSM VRRM V V 900 1300 1500 1700 1900 2100 2300 800 1200 1400 1600 1800 2000 2200 Type Symbol IFRMS IFAVM Test Conditions TVJ = TVJM TC = 105°C; 180° sine IFSM TVJ = 45°C; VR = 0 TVJ = TVJM VR = 0 òi dt 2 3 MDD 95-08N1 B MDD 95-12N1 B MDD 95-14N1 B MDD 95-16N1 B MDD 95-18N1 B MDD 95-20N1 B MDD 95-22N1 B TVJ = 45°C VR = 0 TVJ = TVJM VR = 0 Md 50/60 Hz, RMS IISOL £ 1 mA 2 1 Maximum Ratings 180 A 120 A t = 10 ms t = 8.3 ms t = 10 ms t = 8.3 ms (50 Hz), sine (60 Hz), sine (50 Hz), sine (60 Hz), sine (50 Hz), sine (60 Hz), sine (50 Hz), sine (60 Hz), sine t = 1 min t=1s 2800 3300 2500 2750 A A A A 39 200 45 000 31 200 31 300 2 As A2s A2s A2s -40...+150 150 -40...+125 °C °C °C 3000 3600 V~ V~ Weight Symbol IR Test Conditions TVJ = TVJM; VR = VRRM VF IF = 300 A; TVJ = 25°C 1.43 V VT0 rT For power-loss calculations only TVJ = TVJM 0.75 1.95 V mW QS IRM TVJ = 125°C; IF = 50 A, -di/dt = 6 A/ms 170 45 mC A RthJC per diode; DC current per module per diode; DC current per module 0.26 0.13 0.46 0.23 K/W K/W K/W K/W 12.7 9.6 50 mm mm m/s2 dS dA a Features International standard package JEDEC TO-240 AA Direct copper bonded Al2O3 -ceramic base plate Planar passivated chips Isolation voltage 3600 V~ UL registered, E 72873 ● ● t = 10 ms t = 8.3 ms t = 10 ms t = 8.3 ms Mounting torque (M5) Terminal connection torque (M5) Typical including screws RthJK 3 TO-240 AA 2 TVJ TVJM Tstg VISOL 1 2.5-4/22-35 Nm/lb.in. 2.5-4/22-35 Nm/lb.in. 90 g Characteristic Values 15 mA other values see Fig. 6/7 Creepage distance on surface Strike distance through air Maximum allowable acceleration ● ● ● Applications Supplies for DC power equipment DC supply for PWM inverter Field supply for DC motors Battery DC power supplies ● ● ● ● Advantages Space and weight savings Simple mounting Improved temperature and power cycling Reduced protection circuits ● ● ● ● Dimensions in mm (1 mm = 0.0394") Data according to IEC 60747 and refer to a single diode unless otherwise stated. IXYS reserves the right to change limits, test conditions and dimensions © 2000 IXYS All rights reserved 1-3 MDD 95 Fig. 1 Surge overload current IFSM: Crest value, t: duration Fig. 2 òi2dt versus time (1-10 ms) Fig. 2a Maximum forward current at case temperature Fig. 3 Power dissipation versus forward current and ambient temperature (per diode) Fig. 4 Single phase rectifier bridge: Power dissipation versus direct output current and ambient temperature R = resistive load L = inductive load © 2000 IXYS All rights reserved 2-3 MDD 95 Fig. 5 Three phase rectifier bridge: Power dissipation versus direct output current and ambient temperature Fig. 6 Transient thermal impedance junction to case (per diode) RthJC for various conduction angles d: d DC 180° 120° 60° 30° RthJC (K/W) 0.26 0.28 0.30 0.34 0.38 Constants for ZthJC calculation: i 1 2 3 Rthi (K/W) ti (s) 0.013 0.072 0.175 0.0012 0.047 0.394 Fig. 7 Transient thermal impedance junction to heatsink (per diode) RthJK for various conduction angles d: d DC 180° 120° 60° 30° RthJK (K/W) 0.46 0.48 0.50 0.54 0.58 Constants for ZthJK calculation: i 1 2 3 4 © 2000 IXYS All rights reserved Rthi (K/W) ti (s) 0.013 0.072 0.175 0.2 0.0012 0.047 0.394 1.32 3-3