SURFACE MOUNT DISPLAY APSC56-21YWW Features ! 0.56 INCH !LOW YELLOW Description DIGIT HEIGHT. CURRENT OPERATION. !EXCELLENT CHARACTER APPEARANCE. ! EASY MOUNTING ON P.C. BOARDS OR SOCKETS. The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. !I.C. COMPATIBLE. !MECHANICALLY !STANDARD: RUGGED. WHITE FACE,WHITE SEGMENT. !PACKAGE: 500PCS/REEL. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. SPEC NO: DSAA7930 APPROVED : J. Lu REV NO: V.1 CHECKED : DATE:JAN/18/2002 DRAWN: X.Q.ZHENG PAGE: 1 OF 5 Selection Guide Par t No . Dic e APSC56-21YWW Iv (m c d ) @ 10 m A L en s Ty p e YELLOW (GaAsP/GaP) WHITE DIFFUSED D es c r i p t i o n Min . Ty p . 3.0 4.9 Common Cathode,Rt. Hand Decimal Electrical / Optical Characteristics at T)=25°°C Sy m b o l Par am et er D ev i c e λpeak Peak Wavelength Yellow λD Dominate Wavelength ∆λ1/2 Ty p . Max . Un it s Tes t Co n d it io n s 590 nm IF=20mA Yellow 588 nm IF=20mA Spectral Line Halfwidth Yellow 35 nm IF=20mA C Capacitance Yellow 20 pF VF=0V;f=1MHz VF Forward Voltage Yellow 2.1 2.5 V IF=20mA IR Reverse Current Yellow 10 uA V R = 5V Absolute Maximum Ratings at T)=25°°C P ar am e t e r Yello w Un it s Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 140 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAA7930 APPROVED : J. Lu REV NO: V.1 CHECKED : DATE:JAN/18/2002 DRAWN: X.Q.ZHENG PAGE: 2 OF 5 Yellow APSC56-21YWW SPEC NO: DSAA7930 APPROVED : J. Lu REV NO: V.1 CHECKED : DATE:JAN/18/2002 DRAWN: X.Q.ZHENG PAGE: 3 OF 5 APSC56-21YWW SMT Reflow Soldering Instruction Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) SPEC NO: DSAA7930 APPROVED : J. Lu REV NO: V.1 CHECKED : DATE:JAN/18/2002 DRAWN: X.Q.ZHENG PAGE: 4 OF 5 Tape Specification (Units : mm) SPEC NO: DSAA7930 APPROVED : J. Lu REV NO: V.1 CHECKED : DATE:JAN/18/2002 DRAWN: X.Q.ZHENG PAGE: 5 OF 5