® 10mm SUPER BRIGHT BIG LAMPS Kingbright L-813SR SUPER BRIGHT RED Package Dimensions Features lULTRA BRIGHTNESS. l10mm DIAMETER BIG LAMP. lWIDE VIEWING ANGLE. lI.C. COMPATIBLE. lBOTH DIFFUSED AND WATER CLEAR LENS ARE AVAILABLE. lRELIABLE AND RUGGED. lL ONG LIFE - SOLID STATE RELIABILITY. Description The Super Bright Red source color devices are made with Gallium Aluminum Arsenide Red Light Emitting Diode . Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subjected to change without notice. Selection Guide Part No. Dice Lens Type Iv (mcd) @ 20 mA Viewing Angle Min. Max. 2θ1/2 L-813SRC-B 500 1000 40° L-813SRC-C 1000 1600 40° 1600 2000 40° L-813SRC-E 2000 3000 40° L-813SRC-F 3000 4500 40° L-813SRD-B 120 200 60° 200 350 60° 350 450 60° 450 550 60° L-813SRD-F 550 650 60° L-813SRD-G 650 800 60° L-813SRD-H 800 1300 60° L-813SRC-D L-813SRD-C WATER CLEAR SUPER BRIGHT RED (GaAlAs) L-813SRD-D L-813SRD-E RED DIFFUSED Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2-L813SR-1 Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Super Bright Red ∆λ1/2 Spectral Line Halfwidth C Typ. Max. Units Test Conditions 660 nm IF=20mA Super Bright Red 20 nm IF=20mA Capacitance Super Bright Red 95 pF VF=0V;f=1MHz vF Forward Voltage Super Bright Red 1.85 V IF=20mA IR Reverse Current Super Bright Red 10 uA VR = 5V 2.5 Absolute Maximum Ratings at TA=25°C Parameter Super Bright Red Units 100 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Power dissipation Reverse Voltage -40 °C To +85 °C Operation/Storage Temperature 260 °C For 5 Seconds Lead Solder Temperature [2] Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 4mm below package base. 2-L813SR-2 Super Bright Red L-813SRC / L-813SRD 2-L813SR-3