LS627 PHOTO FET LIGHT SENSITIVE JFET Linear Integrated Systems FEATURES DIRECT REPLACEMENT FOR CRYSTALONICS FF627 FLAT GLASS TOP FOR EXTERNAL OPTICS ULTRA HIGH SENSITIVITY ABSOLUTE MAXIMUM RATINGS1 TO-72 BOTTOM VIEW @ 25 °C (unless otherwise stated) Maximum Temperatures Storage Temperature -65 to +200 °C Operating Junction Temperature -55 to +165 °C Maximum Power Dissipation 400mW Continuous Power Dissipation D 2 3 G S 1 4 C Maximum Currents Gate Current 50mA Maximum Voltages Drain to Source 15V Drain to Gate 15V Gate to Source -10V ELECTRICAL CHARACTERISTICS @ 25 °C (unless otherwise stated) SYMBOL VGS(off) SG CHARACTERISTIC MIN Gate to Source Cutoff Voltage (VPO) 1.0 5.0 V Gate Sensitivity2 6.4 24 µA/mW/cm2 VDS = 10V, VGS = 0V, λ = 0.9µm 2 VDS = 10V, VGS = 0V, RG = 1MΩ 3 SD Drain Sensitivity λIg Gate Current (Light) 10 4 Drain Current (Light) IDSS Drain Saturation Current IGSS Gate Leakage Current (Dark) 8.0 30 gfs Forward Transconductance (gm) Drain to Source On Resistance 8000 100 Gate to Source Capacitance 35 Gate to Drain Capacitance 20 tr Rise Time5 30 tf Fall Time6 50 Linear Integrated Systems UNITS CONDITIONS VDS = 10V, ID = 0.1µA mA/mW/cm 37.5 800 RDS(on) CGD MAX 500 4 λId CGS TYP nA/FC VDS = 10V, VGS = 0V µA/FC VDS = 10V, VGS = 0V, RG = 1MΩ mA VDS = 10V, VGS = 0V pA VGS = -10V, VDS = 0V µS VDS = 10V, VGS = 0V, f = 1kHz Ω VDS = 0.1V, VGS = 0V pF ns VGS = -10V, f = 140kHz VGD = -10V, f = 140kHz VDS = 10V, RL = RG = 100Ω • 4042 Clipper Court • Fremont, CA 94538 • Tel: 510 490-9160 • Fax: 510 353-0261 TO-72 Four Lead 0.230 DIA. 0.209 0.195 DIA. 0.175 0.030 MAX. 0.150 0.115 4 LEADS 0.500 MIN. 0.019 DIA. 0.016 0.100 0.050 2 3 1 4 45° 0.048 0.028 0.046 0.036 NOTES 1. Absolute maximum ratings are limiting values above which serviceability may be impaired. 2. Gate Current per unit Radient Power Density at Lens Surface 3. Drain Current per unit Radient Power Density (λ = 0.9µm). 4. Tungsten Lamp 2800°K Color Temperature. 5. GaAs Diode Source. 6. Directly Proportional to RG. 7. Not production tested. Guaranteed by design. Information furnished by Linear Integrated Systems is believed to be accurate and reliable. However, no responsibility is assumed for its use; nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Linear Integrated Systems. Linear Integrated Systems • 4042 Clipper Court • Fremont, CA 94538 • Tel: 510 490-9160 • Fax: 510 353-0261